No article text was recorded for this version.
stress-aligned material deposition
Version 1 of 152 papers84 conceptsfrozen 2026-10-04
Papers in this version
- Blog: Low-Cycle Fatigue Behavior of Nuclear-Grade Austenitic Stainless Steel Fabricated by Additive Manufacturing
- Blog: Stress Flow Guided Non-Planar Print Trajectory Optimization for Additive Manufacturing of Anisotropic Polymers
- Blog: Anisotropic Mechanical Behaviors of Alsi10Mg Alloy Fabricated by Additive Manufacturing: Experiments and Modeling
- Blog: Exploring Anisotropic Mechanical Characteristics in 3D-Printed Polymer Biocomposites Filled with Waste Vegetal Fibers
- Blog: Microstructural and mechanical properties of 17-4PH stainless steel fabricated via material extrusion 3D printing
- Blog: Open5x: Accessible 5-axis 3D printing and conformal slicing
- Blog: Research on Performance of Vertical FRP Concrete Members
- Blog: Comprehensive Analysis of Process Parameter Interactions on the Mechanical Integrity and Performance of Fused Deposition Modeling (FDM) Fabricated Components
- Blog: Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts
- Blog: The Role of Deformation and Microstructure Evolution on Texture Formation of a TA15 Alloy Subjected to Plane Strain Compression
- Blog: Mechanical properties of seawater volcanic scoria aggregate concrete-filled circular GFRP and stainless steel tubes under axial compression
- Blog: Finite Element Simulation of Crystal Plasticity in the Tensile Fracture Behavior of PBF-LB/M CoCrFeNiMn High Entropy Alloy
- Blog: Path Planning Techniques for Additive Manufacturing: A Review
- Blog: Correction: Study on the Fracture Toughness of 3D Printed Engineering Plastics
- Blog: Swarm-Based Trajectory Generation and Optimization for Stress-Aligned 3D Printing
- Blog: An Advanced Finite Element Modeling for the Failure of Notched Ceramic Matrix Composite With TFP Patch Reinforcement
- Blog: Crystal plasticity finite element modelling of coarse-grained <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si98.svg"><mml:mrow><mml:mi>α</mml:mi></mml:mrow></mml:math>-uranium
- Blog: Research on Physical and Mechanical Properties of Bambusa emeiensis Bamboo Scrimber
- Blog: Stress-induced anisotropy in granular materials: fabric, stiffness, and permeability
- Blog: Mapping 3D Textiles onto their Models
- Blog: Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers
- Blog: Characterization of Thermoplastic Polyurethane (TPU) and Ag-Carbon Black TPU Nanocomposite for Potential Application in Additive Manufacturing
- Blog: Preparation of Cu-Cr-Zr Alloy by Laser Powder Bed Fusion: Parameter Optimization, Microstructure, Mechanical and Thermal Properties for Microelectronic Applications
- Blog: Three-dimensional–Printed Computed Tomography–Based Bone Models for Spine Surgery Simulation
- Blog: Design Considerations for 3D Printed, Soft, Multimaterial Resistive Sensors for Soft Robotics
- Blog: Investigation on the Regional Loss Factor and Its Anisotropy for Aortic Aneurysms
- Blog: Anisotropically organized three-dimensional culture platform for reconstruction of a hippocampal neural network
- Blog: A Reinvestigation of a Superhard Tetragonal sp3 Carbon Allotrope
- Blog: Evaluation of mechanical properties characterization of additively manufactured components
- Blog: Predicting FLDs Using a Multiscale Modeling Scheme
- Blog: Effect of Lanthanum Oxide on the Microstructure and Properties of Ti-6Al-4V Alloy during CMT-Additive Manufacturing
- Blog: Microstructures and Texture Development of the Cross-Roll Rolled AZ31 Alloy Sheet at High Temperature
- Blog: General Support-Effective Decomposition for Multi-Directional 3-D Printing
- Blog: An atomistic study connecting underlying dislocation behavior with superior mechanical properties of NiCoCr medium entropy alloy
- Blog: Metallurgical Characteristics Of Large Slabs, Produced By Electroslag Remelting
- Blog: An Ultrasonic Motor Using a Carbon-Fiber-Reinforced/Poly-Phenylene-Sulfide-Based Vibrator with Bending/Longitudinal Modes
- Blog: More Stiffness with Less Fiber: End-to-End Fiber Path Optimization for 3D-Printed Composites
- Blog: Effect of Aging Treatment on Microstructural Evolution and Mechanical Properties of the Electron Beam Cold Hearth Melting Ti-6Al-4V Alloy
- Blog: Evaluation of Plastic Anisotropy near Surface Through Fractal Dimensional Analysis of X-Z mode Image Measured by Scanning Acoustic Microscope.
- Blog: Application of a Multiscale Model for 3D Printed Concrete
- Blog: Thin-walled cylindrical shells in engineering designs and critical infrastructures: A systematic review based on the loading response
- Blog: Direct Digital Subtractive Manufacturing of a Functional Assembly Using Voxel-Based Models
- Blog: Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method
- Blog: The Role of Structural Polymorphism in Driving the Mechanical Performance of the Alzheimer's Beta Amyloid Fibrils
- Blog: Assessment of Joinability in Additively Manufactured Interlocking Structures
- Blog: Stress-Transfer Characteristics of Stress-Absorbing Elements in the IMZ Implant System. Part I. Stress Around a Freestanding Single Implant under Static Loading Conditions.
- Blog: Designing 3D Anisotropic Frame Fields with Odeco Tensors
- Blog: Computational thermomechanics of crystalline rock, Part I: A combined multi-phase-field/crystal plasticity approach for single crystal simulations
- Blog: Effect of Annealing Texture on Shape Memory Effect in an Fe&ndash;Mn&ndash;Si&ndash;Cr Alloy Wire
- Blog: Numerical Simulation of Thermal and Stress field of Extreme High-Speed Laser Material Deposition (EHLA) at Different Preheating Temperatures
- Blog: A data-centric approach to generative modelling for 3D-printed steel
- Blog: Open5x: Accessible 5-axis 3D printing and conformal slicing
History & citation
Current · Permanent link
- Programming Mechanical Properties via Stress Aligned Toolpaths merged into this direction (55% overlap)
Cite this direction
Latest version (a living page):
@misc{lacuna_stress_aligned_material_deposition_d3f0a7a7,
title = {stress-aligned material deposition},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/stress-aligned-material-deposition/rdr_d3f0a7a7647947d987a57418d0080180},
note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}This exact version (version 1, frozen text):
@misc{lacuna_stress_aligned_material_deposition_d3f0a7a7_v1,
title = {stress-aligned material deposition},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/stress-aligned-material-deposition/rdr_d3f0a7a7647947d987a57418d0080180/v/1},
note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}