Finite Element Simulation of Crystal Plasticity in the Tensile Fracture Behavior of PBF-LB/M CoCrFeNiMn High Entropy Alloy

Liangliang Wu, Wei Duan, Shuaifeng Zhang, Xiao Dong Yang, Wen J. Li, Xu Shen, Yan Zhang, Jianxin ZhouMetals 2025 · DOI

TL;DR

This paper uses a sophisticated finite element model combining crystal plasticity and cohesive elements to simulate the tensile fracture behavior of additively manufactured CoCrFeNiMn high-entropy alloys. The model accurately predicts experimental stress-strain curves and reveals how grain morphology and crystallographic texture influence the alloy's anisotropic mechanical properties and fracture pathways.

What Problem Does This Paper Address?

Additive manufacturing techniques like laser-based powder bed fusion (PBF-LB/M) are revolutionizing material fabrication, enabling complex geometries and unique microstructures. High-entropy alloys (HEAs), such as CoCrFeNiMn, are particularly promising due to their exceptional mechanical and corrosion resistance properties. However, PBF-LB/M often results in anisotropic microstructures, characterized by columnar grains and specific crystallographic textures, which can significantly impact the material's performance under stress. Understanding and predicting how these microstructural features influence the tensile fracture behavior, especially intergranular fracture, is crucial for optimizing the design and application of these advanced materials. Traditional experimental methods for characterizing fracture can be costly and time-consuming, highlighting the need for reliable simulation tools.

Methods

The researchers employed a Crystal Plasticity Finite Element Method (CPFEM) framework, enhanced with cohesive elements. Here's a breakdown:

  • Crystal Plasticity (CPFEM): This approach models the deformation of individual grains based on the underlying physics of dislocation slip. It captures how the crystallographic orientation of each grain influences its response to applied stress.
  • Cohesive Elements: These elements are strategically placed at the grain boundaries to simulate the initiation and propagation of cracks along these interfaces. They employ a bilinear traction-separation law (TSL), which describes the relationship between the force across the boundary and the separation of the grains. This allows for modeling damage evolution and eventual fracture at grain boundaries.
  • Representative Volume Elements (RVEs): To represent the polycrystalline nature of the material, the researchers generated RVEs containing 80 Voronoi grains. These RVEs were designed to mimic different grain morphologies (varying aspect ratios to simulate columnar-to-equiaxed transitions) and crystallographic textures (varying texture strengths).
  • Numerical Simulation: The combined CPFEM-cohesive element model was implemented using a UMAT subroutine in a finite element software. Simulations were conducted under tensile loading in different directions to analyze anisotropy.

This approach is novel in its combined application to PBF-LB/M CoCrFeNiMn HEA, specifically focusing on intergranular fracture and the influence of microstructural anisotropy.

Datasets

The paper does not introduce new experimental datasets for training. Instead, it relies on:

  • Experimental data from existing literature: Specifically, stress-strain curves from tensile fracture experiments conducted by Wang et al. [24] were used to validate the simulation model's accuracy.
  • Material properties from literature: Elastic constants and other material parameters were sourced from previous studies on CoCrFeNiMn HEA.

Key Insights and Ideas

  • CPFEM + Cohesive Elements = Powerful Fracture Predictor: The combination of crystal plasticity for intra-grain behavior and cohesive elements for inter-grain behavior proved highly effective in capturing both the macroscopic stress-strain response and the detailed mechanisms of intergranular fracture.
  • Anisotropy is Inherent and Predictable: The PBF-LB/M process inherently creates anisotropic microstructures (columnar grains, texture), leading to distinct mechanical properties depending on the tensile direction. The simulations clearly quantified this anisotropy.
  • Grain Morphology Matters for Ductility: The transition from columnar to more equiaxed grains significantly impacts ductility. While it can reduce anisotropy, the effect on elongation is complex, increasing it in one direction while decreasing it in another.
  • Texture Strength Dictates Fracture Path: Crystallographic texture isn't just about overall strength; it fundamentally influences where cracks initiate and how they propagate, leading to different fracture patterns.

Key Results

  • Model Validation: The simulated stress-strain curves showed excellent agreement with experimental data, confirming the model's reliability.
  • Anisotropic Mechanical Properties:
    • Scanning Direction: Yield Strength (YS) = 436.9 MPa, Tensile Strength (TS) = 639 MPa, Elongation (EL) = 10.6%.
  • Building Direction: YS = 484.7 MPa, TS = 702.5 MPa, EL = 21.8%.
  • Effect of Columnar-to-Equiaxed Grain Transition:
    • As grains become more equiaxed (e.g., from aspect ratio 1:0.2:0.2 to 1:0.6:0.6), EL in the scanning direction increased from 10.6% to 17.2%.
  • EL in the building direction decreased slightly from 21.8% to 20.3%.
  • Anisotropy coefficients for YS, TS, and EL decreased by 1.8%, 2.2%, and 36.1%, respectively, indicating reduced anisotropy.
  • Influence of Texture Strength: Different texture strengths led to distinct crack initiation sites and propagation paths, demonstrating a significant impact on fracture behavior.

Limitations and Future Work

  • Model Simplifications: While powerful, the model relies on established constitutive laws and material parameters derived from literature. The accuracy is dependent on the quality of these inputs.
  • Computational Cost: Simulating complex microstructures with CPFEM can be computationally intensive, especially for large RVEs or complex loading scenarios.
  • Future Work Suggestions: The authors suggest that this finite element model can be a valuable tool for investigating the influence of various factors (tensile direction, crystal texture, grain morphology) on material properties in additive manufacturing. This approach can reduce the need for extensive experimental testing, offering a more cost-effective and reliable path for material development. Further work could explore the effects of other microstructural features, such as pores or inclusions, and different loading conditions.

Summary updated

Abstract

CoCrFeNiMn high entropy alloy (HEA) fabricated via laser-based powder bed fusion (PBF-LB/M) exhibits exceptional mechanical properties, including high strength, better ductility than titanium alloy, and superior corrosion resistance. This study simulates the intergranular fracture behavior of PBF-LB/M CoCrFeNiMn HEA under tensile loading by embedding cohesive elements with damage mechanisms into polycrystalline representative volume elements based on the crystal plasticity finite element method. The simulation results show good agreement with reported experimental stress–strain curves, demonstrating that the crystal plastic constitutive model combined with the cohesive constitutive model can accurately describe both the macroscopic response behavior and fracture failure behavior of the CoCrFeNiMn HEA. Furthermore, this work investigates the mechanical properties of the HEA in different tensile directions, the improvement of anisotropy through columnar-to-equiaxed grain transition, and the effect of texture strength on crack initiation and propagation. The results show that the polycrystalline CoCrFeNiMn HEA exhibits anisotropic mechanical properties: simulated yield strengths (YSs) are 436.9 MPa (in the scanning direction) and 484.7 MPa (in the building direction), tensile strengths (TSs) reach 639 MPa and 702.5 MPa, and elongations (ELs) are 10.6% and 21.8%, respectively. After equiaxed grain formation, the EL in the scanning direction increased from 10.6% to 17.2%, while the EL in the building direction decreased from 21.8% to 20.3%. Concurrently, the anisotropy coefficients of YS, TS, and EL decreased by 1.8%, 2.2%, and 36.1%, respectively. The cracks initiate at stress concentrations and subsequently propagate along grain boundaries until final fracture. Variations in texture strength significantly influence the crack initiation location and propagation path in the CoCrFeNiMn HEA.
BibTeX
@inproceedings{wu2025finite,
  author = {Liangliang Wu and Wei Duan and Shuaifeng Zhang and Xiao Dong Yang and Wen J. Li and Xu Shen and Yan Zhang and Jianxin Zhou},
  title = {{Finite Element Simulation of Crystal Plasticity in the Tensile Fracture Behavior of PBF-LB/M CoCrFeNiMn High Entropy Alloy}},
  booktitle = {Metals},
  year = {2025},
  doi = {10.3390/met15090990},
}
Figure