No article text was recorded for this version.
material specificity
Version 1 of 1387 papers392 conceptsfrozen 2026-10-04
Papers in this version
- Blog: Study on the Constitutive Modeling of (2.5 vol%TiB + 2.5 vol%TiC)/TC4 Composites under Hot Compression Conditions
- Blog: Mechanical and Electrical Properties of Rapid-Strength Reactive Powder Concrete with Assembly Unit of Sulphoaluminate Cement and Ordinary Portland Cement
- Blog: Effect of Trace Elements on the Crystallization Temperature Interval and Properties of 5xxx Series Aluminum Alloys
- Blog: Electrochemical Corrosion Behavior of CrFeCoNi and CrMnFeCoNi Coatings in Salt Solution
- Blog: Comparative Study of Anti-Corrosion Properties of Different Types of Press-Hardened Steels
- Blog: Pressure-Induced Isostructural Phase Transition and Correlation of FeAs Coordination with the Superconducting Properties of 111-Type Na<sub>1–<i>x</i></sub>FeAs
- Blog: Prediction of Surface Roughness of U71Mn Steel Milling Based on RBF Neural Network
- Blog: Research on Multi-Orbital Scanning Laser Bending Process of Polyvinyl Chloride Sheets
- Blog: Investigations of Microstructures and Erosion–Corrosion Performance of Cast Boron-Bearing Stainless Steel
- Blog: Research on the Erosion Law and Protective Measures of L360N Steel for Surface Pipelines Used in Shale Gas Extraction
- Blog: Analysis and Kinetics Modeling of the Isothermal Oxidation Behavior of Silicide Coatings
- Blog: Boosting the Performance of Perovskite Solar Cells through Systematic Investigation of the Annealing Effect of E-Beam Evaporated TiO2
- Blog: Superior photo-carrier diffusion dynamics in organic-inorganic hybrid perovskites revealed by spatiotemporal conductivity imaging
- Blog: Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation
- Blog: Mid-Infrared (MIR) Complex Refractive Index Spectra of Polycrystalline Copper-Nitride Films by IR-VASE Ellipsometry and Their FIB-SEM Porosity
- Blog: Experimental and mechanistic research on modifying the mechanic properties of the high water backfill material by electrochemical treatment
- Blog: The Quantum Twisting Microscope
- Blog: Vision Measurement Method Based on Plate Glass Window Refraction Model in Tunnel Construction
- Blog: Failure analysis of 650 tons tension rod of cold cast anchor
- Blog: Comprehensive Analysis of Process Parameter Interactions on the Mechanical Integrity and Performance of Fused Deposition Modeling (FDM) Fabricated Components
- Blog: Experimental study and modeling of atomic-scale friction in zigzag and armchair lattice orientations of MoS<sub>2</sub>
- Blog: Evaluation of Depth Size Based on Layered Magnetization by Double-Sided Scanning for Internal Defects
- Blog: The Impact of Draping Effects on the Stiffness and Failure Behavior of Unidirectional Non-Crimp Fabric Fiber Reinforced Composites
- Blog: Characterization of Thermoplastic Polyurethane (TPU) and Ag-Carbon Black TPU Nanocomposite for Potential Application in Additive Manufacturing
- Blog: Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network
- Blog: A Comparative Numerical Study of Lithium-Ion Batteries with Air-Cooling Systems towards Thermal Safety
- Blog: Quantitative Effect of Residual Stress on Gear Bending Fatigue
- Blog: Matching Microscopic and Macroscopic Responses in Glasses
- Blog: Diagnostic tool to detect liquid water removal in the cathode channels of proton exchange membrane fuel cells
- Blog: Rupture of Perfectly Brittle Materials under Concentrated Stress
- Blog: Surface Aware Triboinformatics Framework for Wear Prediction of MWCNT Reinforced Epoxy Composites Using Run-Wise AFM Descriptors and Machine Learning
- Blog: Welding Characteristics of Medium Titanium Plates with Autogenous Laser Welding and Narrow-Gap Laser Filling Welding Modes
- Blog: Sintering and Rolling Behavior of Cu-50In-13Ga Ternary Alloy Powder for Sputtering Target
- Blog: Revealing hidden medium-range order in amorphous materials using topological data analysis
- Blog: Different Effects of Annealing on Microstructure Evolution and SERS Performance for Cu–Cr Alloy Film and Bulk Alloy
- Blog: Design and Fabrication of a Dual Condition PIN-ON-DISC Automated Wear Testing Machine
- Blog: Quenching Stress of Hot-Rolled Seamless Steel Tubes under Different Cooling Intensities Based on Simulation
- Blog: On the Relationship of the Acoustic Properties and the Microscale Geometry of Generic Porous Absorbers
- Blog: A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings
- Blog: Influences of Sub-Atmospheric Pressure on Upward Flame Spread over Flexible Polyurethane Foam Board with Multiple Inclinations
- Blog: Thermoelastic vibration analysis of disc brake based on multi-physical field coupling method
- Blog: Measurement of Magnetic and Magnetostrictive Characteristics of Transformer Core Based on Triaxial Strain Gauge and B-H Vector Sensor
- Blog: Experimental Study of Reverse Underground Coal Gasification
- Blog: Metamaterial made of poroelastic lamellas for sound attenuation in duct
- Blog: Effect of Infrared-Combined Hot Air Intermittent Drying of Jujube (Zizyphus jujuba Miller) Slices: Drying Characteristics, Quality, and Energy Consumption Dimensions
- Blog: Investigation on Microstructural Evolution and Properties of an Al-Cu-Li Alloy with Mg and Zn Microalloying during Homogenization
- Blog: Experimental Study on Proportion Optimization of Rock-like Materials Based on Genetic Algorithm Inversion
- Blog: Numerical Simulation of Fluid Flow, Solidification, and Solute Distribution in Billets under Combined Mold and Final Electromagnetic Stirring
- Blog: Studies of crystallization of sputter-deposited Fe82Si6B12 metallic glass film
- Blog: Analysis and Disposal of Typical Breakdown Failure for Resin Impregnated Paper Bushing in the Valve Side of HVDC Converter Transformer
- Blog: Influence of the Application of a Sound Field on the Flow State Reduction of Newman Fine Iron Ore
- Blog: Measurement of the absolute Raman cross section of the optical phonon in silicon
- Blog: A novel IR-SRGAN assisted super-resolution evaluation of photothermal coherence tomography for impact damage in toughened thermoplastic CFRP laminates under room temperature and low temperature
- Blog: Enhancing the Energy Absorption Performance of 3D-Printed CF/TPU Composite Materials by Introducing a “Rigid–Elastic” Structure Through Multi-Scale Synergies
- Blog: Work Hardening and Change in Contact Condition of Rolling Contact Surface with Plastic Deformation
- Blog: Interface Microstructure and Mechanical Properties of Al/Steel Bimetallic Composites Fabricated by Liquid-Solid Casting with Rare Earth Eu Additions
- Blog: Effect of Polyvinylpyrrolidone Content on Pure Titanium Injection Molding
- Blog: Experimental and Numerical Study of Static Behavior of Precast Segmental Hollow Bridge Piers
- Blog: Study on the Rheological and Thixotropic Properties of Fiber-Reinforced Cemented Paste Backfill Containing Blast Furnace Slag
- Blog: Investigation of the deformation stability in the incremental sheet forming process
Showing 60 of 387 papers.
History & citation
Current · Permanent link
- Brittle to Ductile Transitions in Abrasive Machining merged into this direction (50% overlap)
Cite this direction
Latest version (a living page):
@misc{lacuna_material_specificity_0d3bf526,
title = {material specificity},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/material-specificity/rdr_0d3bf526fcbd41c8aa576d925bcac359},
note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}This exact version (version 1, frozen text):
@misc{lacuna_material_specificity_0d3bf526_v1,
title = {material specificity},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/material-specificity/rdr_0d3bf526fcbd41c8aa576d925bcac359/v/1},
note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}