Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation

Xu Zhengping, Yongtong Feng, Yi Liu, Fengxin Shi, Ge Yang, Han Liu, Wei Cao, Hong Zhou, Shuang Geng, Wenqi LinMicromachines 2024 · DOI

TL;DR

This paper presents a novel single-ended eddy current sensor designed for high-precision micro-displacement measurements. By incorporating a digital potentiometer with an embedded temperature sensor for compensation, the system significantly reduces temperature-induced voltage fluctuations, achieving a resolution of 46 nm over a 500 µm range.

What Problem Does This Paper Address?

The demand for highly accurate, non-contact displacement measurement is growing across various fields, including manufacturing, aerospace, and nanotechnology. While existing non-contact sensors like optical interferometric and capacitive sensors have their strengths, they also have limitations such as cost, complexity, or susceptibility to environmental factors. Eddy current sensors offer a compelling alternative due to their simple structure, low cost, and robustness against contaminants like oil. However, a significant challenge with eddy current sensors is their susceptibility to temperature drift, which can degrade measurement accuracy. This paper aims to address this limitation by developing a temperature-compensated single-ended eddy current sensor that maintains high precision across a range of temperatures.

Methods

The core of the sensor is a single-ended eddy current probe. The system's signal conditioning circuit is designed to convert the probe's output signal, which varies in amplitude and phase with distance, into a usable DC signal. This is achieved through several stages:

  • Signal Conversion: The probe's output signal is converted into a square wave.
  • Phase Detection: A digital phase discriminator compares the probe signal with a reference signal derived from the exciting signal. This comparison generates pulse widths that vary according to the phase difference, effectively encoding the displacement information.
  • DC Component Extraction: A low-pass filter converts the pulsed output of the phase discriminator into a DC voltage.
  • Amplification and Temperature Compensation: The DC signal is amplified, and crucially, temperature compensation is applied. This is accomplished using a digital potentiometer (DS3501U) with an integrated temperature sensor. This component allows for dynamic adjustment of the sensor's bias and gain based on real-time temperature readings, utilizing a lookup table to store pre-calibrated compensation values.

The paper also details the design considerations for the probe itself, including coil parameters, and the selection of the exciting signal frequency to match the resonant frequency of the probe's LC circuit.

Datasets

Not discussed in the paper. The experiments rely on controlled measurements using a calibration setup and a high-low temperature test chamber.

Key Insights and Ideas

  • Temperature Compensation is Crucial: The paper strongly demonstrates that temperature drift is a major factor affecting the accuracy of eddy current sensors, and effective compensation is essential for high-precision applications.
  • Digital Potentiometer for Dynamic Compensation: Utilizing a digital potentiometer with an embedded temperature sensor is an elegant solution for real-time, adaptive temperature compensation, offering more flexibility than fixed compensation methods.
  • Phase-to-Pulse Width Conversion: The strategy of converting phase differences into variable pulse widths and then filtering to a DC signal is an effective way to extract displacement information from the eddy current sensor's output.
  • Nonlinearity Trade-off: While the sensor achieves high resolution, the paper acknowledges that nonlinearity becomes apparent at larger measurement ranges, suggesting a trade-off between range and linearity that needs consideration in practical applications.

Key Results

  • Resolution: The sensor achieves a resolution of 46 nm over a measurement range of 500 µm.
  • Repeatability: The repeatability error is ±0.70% FR (Full Range).
  • Temperature Compensation Effectiveness: Within a temperature range of +2 °C to +58 °C, the voltage fluctuation was reduced from 586 mV (before compensation) to 44 mV (after compensation).
  • Linearity: The sensor exhibits nonlinearity at larger measurement ranges.

Limitations and Future Work

  • Nonlinearity at Large Ranges: The paper explicitly states that nonlinearity exists in the output of the single-ended eddy current sensor when the measurement range is relatively large. This suggests that for applications requiring high linearity over very large displacements, further optimization or a different sensor configuration (e.g., differential type) might be necessary.
  • Target Material Dependence: The sensitivity of eddy current sensors is related to the measured material. While aluminum was used for testing, future work could explore performance with different materials.
  • Range vs. Precision Trade-off: The authors note that in practical applications, the selection of range, accuracy requirements, and target material should be balanced. This implies that optimizing for one parameter might affect others.

Future work could focus on mitigating the observed nonlinearity, exploring a wider range of target materials, and potentially integrating this compensated sensor into more complex systems for real-world applications.

Summary updated

Abstract

To measure the micro-displacement reliably with high precision, a single-ended eddy current sensor based on temperature compensation was studied in detail. At first, the principle of the eddy current sensor was introduced, and the manufacturing method of the probe was given. The overall design plan for the processing circuit was induced by analyzing the characteristics of the probe output signal. The variation in the probe output signal was converted to pulses with different widths, and then it was introduced to the digital phase discriminator along with a reference signal. The output from the digital phase discriminator was processed by a low-pass filter to obtain the DC component. At last, the signal was amplified and compensated to reduce the influence of temperature. The selection criteria of the frequency of the exciting signal and the design of the signal conditioning circuit were described in detail, as well as the design of the temperature-compensating circuit based on the digital potentiometer with an embedded temperature sensor. Finally, an experimental setup was constructed to test the sensor, and the results were given. The results show that nonlinearity exists in the single-ended eddy current sensor with a large range. When the range is 500 μm, the resolution can reach 46 nm, and the repeatability error is ±0.70% FR. Within the temperature range from +2 °C to +58 °C, the voltage fluctuation in the sensor is reduced to 44 mV after temperature compensation compared to the value of 586 mV before compensation. The proposed plan is verified to be feasible, and the measuring range, precision, and target material should be considered in real-world applications.
BibTeX
@inproceedings{zhengping2024single,
  author = {Xu Zhengping and Yongtong Feng and Yi Liu and Fengxin Shi and Ge Yang and Han Liu and Wei Cao and Hong Zhou and Shuang Geng and Wenqi Lin},
  title = {{Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation}},
  booktitle = {Micromachines},
  year = {2024},
  doi = {10.3390/mi15030366},
}
Figure