Thermoelastic vibration analysis of disc brake based on multi-physical field coupling method

Sen Zhang, Jian ZhangJournal of Vibroengineering 2020 · DOI

Abstract

Thermoelastic vibration is the main cause of brake jitter and noise, including significant fluctuations in temperature, thermal stress, structure size and braking moment. In order to improve the reliability of thermoelastic vibration results, a multi-physical field coupling modeling method is proposed in this paper, which can realize the simultaneous calculation of temperature field, stress field and air flow field. Firstly, the theoretical analysis of the whole braking coupling process and feasibility analysis is carried out. Secondly, ABAQUS solid model and FLUENT fluid model are established respectively, and MPCCI is used to share the parameters of the two models, including temperature, node displacement and heat transfer coefficient. Finally, different paths are constructed to study the fluctuation of thermoelastic parameters in different directions. The research conclusion of thermoelastic vibration can provide important basis for optimization of brake NVH (Noise Vibration and Harshness).

Introduction

Brake jitter and high-pitched squeal, collectively known as Noise, Vibration, and Harshness (NVH) issues, are often rooted in thermoelastic vibration. This phenomenon occurs during braking when friction generates intense heat, leading to localized thermal expansion and stress. These physical changes are deeply interconnected: temperature alters material stress, stress causes deformation, and deformation modifies the air flow around the disc, which in turn dictates cooling rates.

Traditional simulation methods often simplify this complex interaction by coupling only two fields (e.g., thermal and mechanical) or assuming uniform cooling coefficients. Such simplifications fail to capture the dynamic "fluid-solid-thermal" interactions that occur in real-world braking scenarios. This paper presents a high-fidelity coupling method that integrates temperature, stress, and air flow fields simultaneously to provide more accurate predictions of brake behavior.

Methodology

The proposed numerical simulation utilizes a "loose coupling" scheme involving three specialized software platforms. ABAQUS is employed for the solid-thermal modeling to calculate temperature fields and mechanical stress. FLUENT handles the computational fluid dynamics (CFD), simulating air movement and calculating convective heat transfer coefficients. The Mesh-based Parallel Code Coupling Interface (MPCCI) serves as the synchronizer, enabling real-time data exchange between the solid and fluid solvers.

Flowchart of the multi-physical field coupling method using ABAQUS, FLUENT, and MPCCI.

To efficiently model the rotating disc, a sliding grid method is used, avoiding the need for continuous mesh regeneration. The fluid model also incorporates a non-equilibrium wall function to accurately capture turbulent flow near the disc surface.

Finite element mesh of the brake disc and the surrounding air domain showing the coupling area.

Experimental Validation

The simulation model was validated using the Link3900 NVH Platform, a state-of-the-art tribology testing machine. Experimental bench tests involved installing high-precision thermocouples into a physical brake disc to record real-time temperature data during braking cycles. These measurements provided a ground truth for assessing the simulation's accuracy and ensuring the multi-physical field interactions were correctly captured.

Results and Discussion

The multi-physical coupling method demonstrated high predictive accuracy, with temperature results matching experimental bench tests with an average deviation of only 3.9%. Key insights from the study include:

  • Hot Spot Formation: The simulation accurately identified "hot spots"—localized regions of extreme heat and stress—that emerge early in the braking process and drive uneven wear.
  • Stress Mutation at the Fins: A significant finding was the "mutation" of stress levels as the brake pad passes over the internal cooling fins. These spikes occur instantaneously at the joints where fins meet the disc surface.
  • Zigzag Deformation: Nodes on the friction surface exhibited a "zigzag" pattern of temperature rise and deformation rather than a smooth expansion, directly contributing to the "jitter" felt by drivers.
  • Dynamic Cooling: The study confirmed that heat transfer coefficients vary significantly across the disc surface based on local air speed and pressure, highlighting the necessity of 3-way coupling for accurate thermal modeling.

Conclusion

The developed "fluid-solid-thermal" coupling method offers a significant advancement in simulating disc brake thermoelastic vibration. By achieving a 3.9% error margin compared to bench tests, the model provides a reliable tool for engineers to optimize brake design and reduce NVH. Future work will focus on refining internal fin structures to mitigate stress mutations and applying the method to advanced friction materials like ceramic composites.

Summary updated

Abstract

Thermoelastic vibration is the main cause of brake jitter and noise, including significant fluctuations in temperature, thermal stress, structure size and braking moment. In order to improve the reliability of thermoelastic vibration results, a multi-physical field coupling modeling method is proposed in this paper, which can realize the simultaneous calculation of temperature field, stress field and air flow field. Firstly, the theoretical analysis of the whole braking coupling process and feasibility analysis is carried out. Secondly, ABAQUS solid model and FLUENT fluid model are established respectively, and MPCCI is used to share the parameters of the two models, including temperature, node displacement and heat transfer coefficient. Finally, different paths are constructed to study the fluctuation of thermoelastic parameters in different directions. The research conclusion of thermoelastic vibration can provide important basis for optimization of brake NVH (Noise Vibration and Harshness).
BibTeX
@article{zhang2020thermoelastic,
  author = {Sen Zhang and Jian Zhang},
  title = {{Thermoelastic vibration analysis of disc brake based on multi-physical field coupling method}},
  journal = {Journal of Vibroengineering},
  year = {2020},
  doi = {10.21595/jve.2019.20505},
}
Figure