Self-Interference Cancellation for Full-Duplex Integrated Sensing and Communication

You are reading version 1 of this direction, frozen 2026-10-04. The latest version is version 2.

Version 1 of 2234 papers376 conceptsfrozen 2026-10-04

The "holy grail" of wireless engineering is In-Band Full-Duplex (IBFD) operation: the ability for a device to transmit and receive signals simultaneously on the exact same frequency. Traditionally, radios are half-duplex, meaning they must either take turns (Time Division) or use different frequencies (Frequency Division) to avoid "hearing" their own transmission.

As we move toward 6G, this challenge is compounded by Integrated Sensing and Communication (ISAC). In ISAC, a base station or mobile device doesn't just send data; it also acts as a radar, using reflections of its own signals to "see" the environment. However, as J. Andrew Zhang and colleagues note in their survey of perceptive mobile networks, the high-power outgoing signal often completely overwhelms the receiver, making it nearly impossible to detect the much weaker echoes reflected from distant objects.

The Power Disparity Problem

The fundamental hurdle is a massive power imbalance. In a typical full-duplex system, the radio's own transmitted signal leaks into its receiver at power levels 50 to 110 dB stronger than the desired incoming signal. As Yili Xia and Wenjiang Pei explain, this is like trying to hear a whisper while standing next to a jet engine (An Augmented Nonlinear LMS for Digital Self-Interference Cancellation in Full-Duplex Direct-Conversion Transceivers).

If this self-interference (SI) isn't cancelled before it reaches the Analog-to-Digital Converter (ADC), it causes receiver saturation. Once the hardware is saturated, the information in the weak incoming signal is lost to non-linear distortion and clipping, which no amount of digital processing can recover.

A Multi-Stage Defense

To bridge this 100+ dB gap, researchers have converged on a layered approach to cancellation that spans the physical, analog, and digital domains. Hongtao Lu and Shihai Shao demonstrate that while these stages interact, the total suppression is maximized by pushing physical and RF cancellation as far as possible before the signal ever reaches the digital stage (Impact of the Amount of RF Self-interference Cancellation on Digital Self-interference Cancellation in Full Duplex Communications).

1. Spatial Isolation and Beamforming

At millimeter-wave (mmWave) frequencies, the large number of antennas in MIMO arrays allows for "spatial nulling." By strategically shaping the transmit and receive beams, a device can "steer" its own interference away from its own receiver. Ian P. Roberts and Jeffrey G. Andrews propose hybrid beamforming designs that prioritize this spatial isolation to protect the receiver's limited dynamic range (Hybrid Beamforming for Millimeter Wave Full-Duplex under Limited Receive Dynamic Range).

In ISAC systems like Gemini, developed by Suman Banerjee and Zhe Chen, this spatial nulling is combined with deep-learning-based denoising to detect weak radar reflections while maintaining multi-Gbps data throughput (Gemini: Integrating Full-fledged Sensing upon Millimeter Wave Communications).

2. Analog and RF Cancellation

Before the signal is digitized, analog circuits attempt to subtract a version of the known transmitted signal from the received signal. In low-power systems like Ambient IoT or RFID, researchers like Kan Zheng use physical components called circulators to provide hardware isolation between the high-power carrier wave and the sensitive receiver path (Ambient IoT towards 6G: Standardization, Potentials, and Challenges). For wideband systems, Tingjun Chen and Jin Zhou have pioneered Frequency-Domain Equalization (FDE), using reconfigurable filters to emulate the complex, frequency-selective behavior of the interference channel (Wideband Full-Duplex Wireless via Frequency-Domain Equalization: Design and Experimentation).

3. Digital Cancellation

The final stage uses sophisticated algorithms to clean up the residual interference that survives the analog filters. This is where the "known" nature of the transmitted signal is most useful. By using the original digital bits as a reference, the system can model and subtract the remaining leakage. Recent work by Shu Cai and Jun Zhang leverages Symbol-Level Precoding (SLP) to proactively design the transmitted waveform so that its interference is easier to cancel at the receiver (Symbol-Level Precoding-Based Self-Interference Cancellation for ISAC Systems).

Sensing as a New Frontier

The shift toward ISAC changes the goal of cancellation. In pure communication, the goal is to recover a signal from a remote transmitter. In sensing, the goal is to recover the reflection of your own signal.

This creates a unique "co-design" problem. As Kumar Vijay Mishra and Mohammad Saquib argue, the radar code and the communication precoder must be designed jointly (Co-Designing Statistical MIMO Radar and In-band Full-Duplex Multi-User MIMO Communications). If the radar waveform is too similar to the interference leakage, the cancellation process might accidentally "cancel" the very environmental echoes the system is trying to detect.

Newer architectures are even enlisting the environment to help. Yü Liu and Dusit Niyato have explored using Reconfigurable Intelligent Surfaces (RIS) to proactively reflect signals in a way that creates a "quiet zone" at the receiver, providing an external layer of interference management (STAR-RIS-Enabled Full-Duplex Integrated Sensing and Communication System).

Papers in this version

Showing 60 of 234 papers.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 313 papers
  2. Version 1 · 2026-10-04 · 234 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_full_duplex_self_interference_c955eec1,
  title = {full-duplex self-interference},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/full-duplex-self-interference/rdr_c955eec19e3a45e39d84aacf32b325d6},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-22},
}

This exact version (version 1, frozen text):

@misc{lacuna_self_interference_cancellation_for_full__c955eec1_v1,
  title = {Self-Interference Cancellation for Full-Duplex Integrated Sensing and Communication},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/self-interference-cancellation-for-full-duplex-integrated-sensing-and/rdr_c955eec19e3a45e39d84aacf32b325d6/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-22},
}