Full-Duplex Realization in Practical Wireless Networks

This direction is merged into another direction: full-duplex self-interference. Its last version stays readable and citable here.

Version 1 of 143 papers46 conceptsfrozen 2026-10-04

In information theory, the "Full-Duplex" (FD) assumption is a powerful ideal: the ability of a node to transmit and receive signals simultaneously on the same frequency. If realized, it promises to double spectral efficiency and enable revolutionary applications like monostatic radar sensing in 6G. However, a persistent gap exists between these theoretical capacity gains and real-world implementability.

The core of this research direction is the management of Self-Interference (SI)—the phenomenon where a device’s own high-power transmission overwhelms the faint incoming signals it is trying to detect. Whether in the context of cooperative relaying or Integrated Sensing and Communication (ISAC), researchers are working to bridge the divide between idealized full-duplex models and the "half-duplex" reality of current hardware.

The Flashlight and the Star: The Self-Interference Problem

To understand why full-duplex is difficult, imagine trying to see a distant, dim star while holding a high-intensity searchlight in your hand. The light reflecting off the dust in the air immediately in front of you (the self-interference) is orders of magnitude brighter than the light from the star (the signal).

In wireless systems, this power differential is extreme. As noted by Xu Chen and Zhiyong Feng in Multiple Signal Classification Based Joint Communication and Sensing System, current technology struggles to achieve the extreme isolation levels—often exceeding 100 dB—needed to prevent the transmitter from saturating the receiver. Without this isolation, the "echoes" required for sensing or the "messages" required for relaying are lost in the noise.

The Full-Duplex Tax on Integrated Sensing

The most urgent driver for this research is Integrated Sensing and Communication (ISAC). In 6G visions, a base station acts as both a data provider and a radar. For a base station to perform "monostatic" sensing—detecting a target using the reflection of its own transmitted signal—it must be able to "listen" while it "talks."

Fan Liu and Yunxin Li argue in Frame Structure and Protocol Design for Sensing-Assisted NR-V2X Communications that the requirement for full-duplex operation is a significant "tax" on integrated systems. If the hardware cannot perfectly cancel self-interference, the system must revert to half-duplex modes, which Shihang Lu and Fan Liu identify as a primary hurdle for real-time sensing in Integrated Sensing and Communications: Recent Advances and Ten Open Challenges.

Bridging the Theory-Hardware Gap in Relaying

The struggle with full-duplex is not new; it has long been the "missing link" in cooperative relaying. Theoretical models, such as those explored by Yingbin Liang and Venugopal V. Veeravalli in Cooperative Relay Broadcast Channels, often assume nodes can relay data instantaneously.

In practice, hardware constraints usually force a "Half-Duplex" (HD) compromise, where the relay must listen in one time slot and speak in the next. This reduces throughput by half. To mitigate this, researchers have proposed several intermediate strategies:

  1. Partial Decode-and-Forward (PDF): Christoph Hellings and Patrick Gest develop optimization frameworks in Maximizing the Partial Decode-and-Forward Rate in the Gaussian MIMO Relay Channel that attempt to find the best transmission strategy given these timing and hardware constraints.
  2. $\alpha$-Duplexing: Instead of an "all-or-nothing" approach, Ahmad AlAmmouri and Mohamed-Slim Alouini propose the In-Band $α$-Duplex Scheme, which allows for a tunable frequency overlap between uplink and downlink, balancing spectral gain against the complexity of interference cancellation.
  3. Asymmetric Hardware: Protocols like FuPlex, proposed by Qiao Qu and Mao Yang, suggest that only the Access Point (AP) needs expensive FD hardware, while mobile devices remain simple and half-duplex.

Algorithmic Workarounds

When hardware cannot provide perfect isolation, the burden shifts to signal processing. In Nonorthogonal waveform assisted DOA estimation for joint MIMO sensing and communication, Luning Lin and Zhiguo Shi 0001 demonstrate how to use standard communication waveforms as radar pilots. By treating the self-interference not just as noise but as a known reference, they can reconstruct target directions even without perfect hardware isolation.

Similarly, Kai Wu and J. Andrew Zhang propose in Integrating Low-Complexity and Flexible Sensing into Communication Systems a framework that decouples sensing from the rigid structure of communication symbols, allowing for more robust processing in the presence of transmitter leakage.

The Path Forward

The research direction is moving away from purely theoretical capacity derivations that assume "perfect" full-duplexing. Instead, as seen in the work of Deniz Gunduz and Andrea Goldsmith on Multiple Multicasts with the Help of a Relay, the field is increasingly focused on "structured" approaches—using lattice codes, advanced beamforming, and hybrid duplexing—to extract the maximum possible gain from hardware that remains stubbornly imperfect. The goal is no longer just to prove what full-duplex could do, but to build the architectures that allow it to function in the messy, high-interference reality of 6G.

Papers in this version

History & citationVersion 1 · 2026-10-04

Merged into another direction · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_full_duplex_realization_in_practical_wir_d083a630,
  title = {Full-Duplex Realization in Practical Wireless Networks},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/full-duplex-realization-in-practical-wireless-networks/rdr_d083a630e8c44e96bda71e598d88cbf8},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-22},
}

This exact version (version 1, frozen text):

@misc{lacuna_full_duplex_realization_in_practical_wir_d083a630_v1,
  title = {Full-Duplex Realization in Practical Wireless Networks},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/full-duplex-realization-in-practical-wireless-networks/rdr_d083a630e8c44e96bda71e598d88cbf8/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-22},
}