TL;DR
This paper investigates a wireless relaying system where both the source and relay harvest radio-frequency (RF) energy to power their operations. The authors analyze the end-to-end throughput for both half-duplex (HD) and full-duplex (FD) relaying schemes, considering factors like energy harvesting time, relay location, and self-interference (SI) in FD systems. They demonstrate that optimizing for throughput doesn't necessarily lead to optimal energy efficiency, providing valuable insights for designing efficient green communication networks.
What Problem Does This Paper Address?
The Internet of Things (IoT) relies heavily on connected devices that require a constant and reliable energy supply. While batteries are common, they present challenges related to cost and maintenance, especially for devices in hard-to-reach locations. Energy harvesting (EH) from ambient sources, particularly radio-frequency (RF) signals, offers a promising solution for powering these devices wirelessly, enabling simultaneous wireless information and power transfer (SWIPT). This is especially relevant for intelligent transportation systems (ITS) and vehicle-to-vehicle (V2V) communication, where devices are mobile and may have limited access to traditional power sources.
However, implementing efficient wireless relaying systems with RF energy harvesting presents several challenges. These include:
- Energy Constraints: Both the source and relay need to harvest enough energy to transmit data.
- Relaying Schemes: Deciding between half-duplex (HD) and full-duplex (FD) relaying impacts performance and complexity. FD relaying can offer higher spectral efficiency but suffers from self-interference (SI).
- Optimal Resource Allocation: Determining the best way to allocate time for energy harvesting versus data transmission is crucial for maximizing throughput and/or energy efficiency.
- System Parameters: Factors like relay location, channel conditions, and SI cancellation levels significantly influence overall system performance.
This paper addresses the need for a comprehensive analysis of buffer-aided decode-and-forward (DF) wireless relaying systems that incorporate RF energy harvesting, aiming to provide guidance on optimizing performance under various conditions.
Methods
The authors employ a theoretical and simulation-based approach to analyze the system. Key methods include:
- Mathematical Modeling: They derive exact analytical expressions for the end-to-end throughput of buffer-aided DF relaying for both HD and FD schemes. These expressions account for fading channel statistics, energy harvesting (EH) and data transmission durations, and the self-interference (SI) cancellation level for FD relaying.
- Ergodic Capacity Derivation: The paper meticulously derives the ergodic capacities of the source-relay (SR) and relay-destination (RD) channels for both HD and FD modes. This involves calculating the cumulative distribution function (CDF) and probability distribution function (PDF) of the signal-to-noise ratios (SNRs) for these channels.
- Optimization: For HD relaying, they outline a process to determine optimal time allocations ($\alpha_2$ and $\alpha_3$) for SR and RD transmissions to equalize throughput on both links.
- Numerical Simulations: Matlab is used to conduct simulations to evaluate the performance of the proposed schemes. These simulations allow for the investigation of the effects of various parameters, including energy harvesting time factor ($\alpha_1$), relay location ($d_1$), and SI levels in FD systems.
- Energy Efficiency Metric: The paper defines and analyzes energy efficiency (NEE) as the number of bits transmitted per Joule of energy consumed, providing a crucial metric for green communication applications.
Datasets
Not discussed in the paper. The evaluation is based on simulated channel models and parameters.
Key Insights and Ideas
- Throughput vs. Energy Efficiency Trade-off: A fundamental finding is that the relaying scheme optimized for maximum throughput is not necessarily the most energy-efficient. This highlights the need to consider specific performance criteria when designing and deploying such systems.
- Buffer-Aided Relaying Advantage: The paper confirms that buffer-aided relaying consistently offers higher throughput compared to non-buffer relaying, as the buffer allows for more flexible data management.
- FD Relaying Benefits (with caveats): With sufficient SI cancellation, FD relaying can achieve higher throughput and energy efficiency than HD relaying. However, the effectiveness of FD is highly dependent on the residual SI level.
- Optimal Harvesting Time: The optimal time for energy harvesting ($\alpha_1$) is not at the extremes (0% or 100%). There's a sweet spot that balances energy accumulation with sufficient time for data transmission.
- Relay Location Matters: The optimal location of the relay significantly impacts throughput and energy efficiency. For HD and perfect SI FD, the optimal location is closer to the middle of the source-destination link. For FD with imperfect SI, the optimal location can shift closer to the source.
Key Results
- Analytical Throughput Expressions: The paper provides closed-form expressions for end-to-end throughput for both HD and FD buffer-aided relaying, which are crucial for theoretical analysis and system design.
- Performance Comparison: Simulations show that for a given $\alpha_1$, FD communication generally offers higher effective transmission time. However, the throughput advantage of FD over HD is contingent on the SI level. With significant residual SI, HD can outperform FD.
- Energy Efficiency Trends: Energy efficiency increases with $\alpha_1$ up to an optimal point and then decreases. This is because at low $\alpha_1$, harvested energy is insufficient, and at high $\alpha_1$, data transmission time is constrained.
- Impact of SI: Figure 4 and 5 demonstrate that as the SINR for FD decreases (meaning higher SI), both throughput and energy efficiency decrease significantly compared to FD with no SI or HD.
- Optimal Relay Location Findings: Figures 6 and 7 illustrate that the maximum throughput and energy efficiency are achieved at specific relay distances ($d_1$), with HD and perfect SI FD systems showing optimal performance around the midpoint of the SR link.
Limitations and Future Work
- Limitations:
- The paper assumes ideal energy harvesting circuitry with maximum efficiency ($\eta=1$). Real-world efficiencies are lower.
- The analysis considers a single relay. Multi-relay scenarios could offer further improvements.
- The study focuses on decode-and-forward (DF) relaying. Other relaying strategies might yield different results.
- The paper assumes a dedicated power station for RF energy harvesting. Future work could explore harvesting from ambient sources.
- Future Work:
- Applying resource allocation techniques to further optimize system performance.
- Investigating systems with constrained delays at the relay.
- Exploring the combination of energy harvesting with more advanced techniques like non-orthogonal multiple access (NOMA) and multi-point NOMA cooperative relaying.
Summary updated