No article text was recorded for this version.
protective oxide barrier
Version 1 of 155 papers77 conceptsfrozen 2026-10-04
Papers in this version
- Blog: Oxidation Behavior of Quaternary Co-20Re-25Cr-3Si Alloy at Laboratory Air
- Blog: Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx
- Blog: Corrosion Compatibility of Stainless Steels and Nickel in Pyrolysis Biomass-Derived Oil at Elevated Storage Temperatures
- Blog: A Comparative Study of the Corrosion Behavior of Three Stainless Steels in an Eutectic (Li,Na,K) <sub>2</sub> CO <sub>3</sub> Melt with and without (Na,K)Cl Additives at 973K in Air
- Blog: Effect of Heat Input on Microstructure and Corrosion Resistance of X80 Laser Welded Joints
- Blog: A Study on the Solderbility and Joint Reliability of Lead-Free Sn-Zn-Al Solder
- Blog: Corrosion Behavior of NiTi Alloys Fabricate by Selective Laser Melting Subjected to Femtosecond Laser Shock Peening
- Blog: Microstructural evolution and performance of carbon fiber-toughened ZrB2 ceramics with SiC or ZrSi2 additive
- Blog: Reversible Superwetting Transition Between Superhydrophilicity and Superhydrophobicity on a Copper Sheet, and Its Corrosion Performance
- Blog: Preparation of VZrHfNbTa High-Entropy Alloy-Based High-Temperature Oxidation-Resistant Coating and Its Bonding Mechanism
- Blog: Duplex Surface Treatments of Plasma Nitrocarburizing and Plasma Oxidation of SKD 11 Steel
- Blog: Oxidation Behavior of Pre-Strained Polycrystalline Ni3Al-Based Superalloy
- Blog: The Effects of CeO2 Content on the Microstructure and Property of Duplex Stainless Steel Layer Obtained by Plasma Arc Cladding Technology
- Blog: Enhancement of mechanical, corrosion, and biocompatibility properties of zinc alloys through magnesium and neodymium alloying for bone implant applications
- Blog: Leaching Behavior and Mechanisms of Li, Rb, K, Sr, and Mg in Clay-Type Lithium Ore via a Roasting–Water Leaching Process
- Blog: Influence of Rust Inhibitor on the Corrosion Resistance of Reinforcement in Cement Paste with Chloride
- Blog: Effect of Cr Addition on the Corrosion Resistance of a Ni-NiMo<SUB>2</SUB>B<SUB>2</SUB> Two-Phase Alloy in a HNO<SUB>3</SUB> Aqueous Solution
- Blog: Phytic-Acid-Modified Copper Foil as a Current Collector for Lithium-Ion Batteries
- Blog: Effect of Sr on Mechanical Properties and Corrosion Behavior of Rolled ZM60 Alloy
- Blog: Welding Characteristics of Medium Titanium Plates with Autogenous Laser Welding and Narrow-Gap Laser Filling Welding Modes
- Blog: Corrosion Behavior of the 2024 Aluminum Alloy in the Atmospheric Environment of the South China Sea Islands
- Blog: A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings
- Blog: Microstructure and Properties of Gas-Nitrided Ti-6Al-4V Alloy
- Blog: Evolution of Calcareous Deposits and Passive Film on 304 Stainless Steel with Cathodic Polarization in Sea Water
- Blog: EFFECT OF <font>C</font><sub>2</sub><font>H</font><sub>2</sub> FLOW RATE ON THE DEPOSITION OF <font>TI</font>-<font>TIC</font>-<font>TIC</font>/<font>DLC</font> GRADIENT NANO-COMPOSITE FILM ON <font>NITI</font> ALLOY
- Blog: Quantification of the Atmospheric Corrosion of 304 and 2205 Stainless Steels Using Electrochemical Probes Based on Thevenin Electrochemical Equivalent Circuit Model
- Blog: Hydrogen Permeation Behavior of Carbon Steel During Corrosion in Highly Pressed Saturated Bentonite
- Blog: Corrosion of Fe-Cr-Si Alloys in Oxidizing and Sulphidizing-Oxidizing Atmospheres
- Blog: Atomic-Scale Revelation of Voltage-Modulated Electrochemical Corrosion Mechanism in 4H-SiC Substrate
- Blog: Enhanced magnetic properties of FeSiAl soft magnetic composites prepared by utilizing phosphate: PSA as insulating layer
- Blog: Research on the Influence of Carbonation on the Content and State of Chloride Ions and the Following Corrosion Resistance of Steel Bars in Cement Paste
- Blog: 21006 Study of Optimum Composition of Extra High Purity Ni-Cr-W-Si Alloys for Reprocessing Condition with Nitric Acid
- Blog: A theoretical investigation of the effect of Ga alloying on thermodynamic stability, electronic-structure, and oxidation resistance of Ti2AlC MAX phase
- Blog: Unveiling Thermal Degradation and Fire Behavior of 110 kV Ultra-High-Voltage Flame-Retardant Cable Sheath After Thermal Aging
- Blog: Catalytic Polymerization of Phthalonitrile Resins by Carborane with Enhanced Thermal Oxidation Resistance: Experimental and Molecular Simulation
- Blog: High temperature oxidation behavior of disordered (Ti0.5Zr0.5)2AlC MAX phase via a Machine Learning-Augmented DFT approach
- Blog: Effects of Medium and Flow Rate on the Film-Forming Structures of B10 Cu-Ni Alloys and Their Resistance to Corrosion Caused by Sulfate-Reducing Bacteria
- Blog: Preparation of Barium Europium Phosphate and Its Performance in Acrylic Resin Anti-Corrosion Coating
- Blog: Effect of Surface Roughness on Static Corrosion Behavior of J55 Carbon Steel in CO2-Containing Geothermal Water at 65 °C
- Blog: ICONE19-44022 STUDY OF OPTIMUM COMPOSITION OF EXTRA HIGH PURITY Nb-W ALLOY FOR REPROCESSING CONDITION WITH BOILING NITRIC ACID
- Blog: Perpendicular anisotropy in FeCr sputtered films.
- Blog: Nature of the surface space charge layer on undoped SrTiO<sub>3</sub>(001)
- Blog: Growth regulation of calcium oxalate film for surface protection of carbonate stone heritage
- Blog: The Research Progress of Magnesium Alloy Building Formwork
- Blog: Enhancing the Stability of Passive Film on 304 SS by Chemical Modification in Alkaline Phosphate–Molybdate Solutions
- Blog: Synergistic Effects of Hydrostatic Pressure and Dissolved Oxygen on the SCC Behavior of Hydrogenated Ti6Al4V Alloy in Deep-Sea Environment
- Blog: Effect of post-weld heat treatment on the microstructure and mechanical properties of laser-welded joints of SLM-316 L/rolled-316 L
- Blog: Oxidation Protection with Amorphous Surface Oxides: Thermodynamic Insights from Ab Initio Simulations on Aluminum
- Blog: Effect of Boron Content in LiOH Solutions on the Corrosion Behavior of Zr-Sn-Nb Alloy
- Blog: Development, Challenges, and Applications of Concrete Coating Technology: Exploring Paths to Enhance Durability and Standardization
- Blog: Microstructure and Thermal Stability of Cu/TixSiyN/AlSiN Solar Selective Absorbing Coating
- Blog: Microstructure Evolution, Mechanical Properties, and Corrosion Resistance of Hot Rolled and Annealed Ti-Mo-Ni Alloy
- Blog: Investigation on Boronizing of N80 Tube Steel
- Blog: Study on the growth mechanism of the internal oxide layer in 9% Ni cryogenic steel
- Blog: Oxidation Kinetics, Morphology Evolution, and Formation Mechanisms of the High-Temperature Oxide Scale for Cr-Alloyed Automotive Beam Steels
History & citation
Current · Permanent link
- Interfacial Barriers for Corrosion and Oxidation Resistance merged into this direction (61% overlap)
Cite this direction
Latest version (a living page):
@misc{lacuna_protective_oxide_barrier_60c47407,
title = {protective oxide barrier},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/protective-oxide-barrier/rdr_60c47407a7184e9f8a3ad13b639ad9a3},
note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}This exact version (version 1, frozen text):
@misc{lacuna_protective_oxide_barrier_60c47407_v1,
title = {protective oxide barrier},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/protective-oxide-barrier/rdr_60c47407a7184e9f8a3ad13b639ad9a3/v/1},
note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}