In classical aerodynamics, gases are typically modeled using the ideal gas law. Under these standard assumptions, fluid behavior follows predictable geometric and thermodynamic rules: expanding a gas through a diverging nozzle always increases its velocity, and passing a gas through a shock wave always decreases its Mach number.
However, these textbook principles break down entirely when fluids operate near their liquid-vapor critical point or saturation curve. As detailed in a comprehensive review of the field (Nonideal Compressible Fluid Dynamics of Dense Vapors and Supercritical Fluids), these dense gas regimes introduce molecular forces and complex compressibility factors that give rise to Non-Ideal Compressible Fluid Dynamics (NICFD)—a regime where classical gasdynamic expectations are inverted.
The Core Mechanism: The Fundamental Derivative
To understand why non-ideal fluids behave so counterintuitively, one must look at a key thermodynamic parameter known as the fundamental derivative of gas dynamics. This derivative characterizes how the local speed of sound changes with fluid density during compression.
In a standard ideal gas, this derivative is a constant greater than one, meaning that compressing a gas always increases its local speed of sound. However, for molecularly complex fluids like siloxanes or hydrocarbons operating near their critical point, the fundamental derivative is highly variable and can fall below unity (Tiemo Mathijssen et al. in The flexible asymmetric shock tube (FAST): a Ludwieg tube facility for wave propagation measurements in high-temperature vapours of organic fluids). When the fundamental derivative drops below one, the fluid enters a regime where the speed of sound can actually decrease during compression, fundamentally altering how pressure waves propagate.
Inverting the Shock Wave
This variation in the speed of sound leads to wave phenomena that are mathematically impossible under ideal gas assumptions. For example, conventional aerodynamic models dictate that the Mach number must decrease across a shock wave. Yet, when the fundamental derivative is sufficiently low, a fluid can experience "non-ideal oblique shocks" where the post-shock Mach number actually exceeds the pre-shock value (Davide Vimercati et al. in Non-ideal oblique shock waves).
If the fundamental derivative drops even further and becomes negative—a defining characteristic of Bethe–Zel’dovich–Thompson (BZT) fluids—the traditional mechanics of expansion and compression flip entirely. In classical gasdynamics, expansion is always smooth and compression forms shocks. In BZT fluids, the opposite occurs: smooth compression is possible, while expansion can result in abrupt "rarefaction shock waves" and shock splitting (Alberto Guardone in Three-dimensional shock tube flows for dense gases; Alberto Guardone et al. in Exact solutions to non-classical steady nozzle flows of Bethe–Zel’dovich–Thompson fluids).
Non-Monotonic Acceleration and Curved Flows
In ideal gas dynamics, a nozzle's physical geometry uniquely dictates whether a flow accelerates or decelerates. In the non-ideal regime, geometry alone no longer guarantees a predictable outcome. Because molecular forces lower the speed of sound in dense states near the saturation line, expanding vapors can exhibit a more rapid velocity increase than ideal laws predict (Simone Gallarini et al. in Direct velocity measurements in high-temperature non-ideal vapor flows).
As a result, the Mach number does not always increase monotonically during a continuous expansion; instead, it can reach a peak and subsequently decrease within a single diverging section of a nozzle or turbine cascade (Alessandro Romei et al. in Non-ideal compressible flows in supersonic turbine cascades). This non-monotonic behavior also extends to curved flows. While classical theory states that flow speed must decrease as the radius of curvature increases, complex fluids near their critical point can exhibit non-monotone profiles where the flow velocity unexpectedly increases toward the outer radius of a curve (Alberto Guardone et al. in Ideal and non-ideal planar compressible fluid flows in radial equilibrium).
The Shift to Stagnation Dependence
Why does this happen, and why is it so difficult to model? In ideal gas flows, normalized properties like pressure ratios and Mach numbers are fixed by the geometry of the channel and the fluid's specific heat ratio. In non-ideal regimes, however, the flow profiles become highly sensitive to the fluid's exact thermodynamic state.
Specifically, the flow properties are heavily influenced by the initial inlet stagnation conditions—the starting pressure and temperature (Andrea Spinelli et al. in Experimental evidence of non-ideal compressible effects in expanding flow of a high molecular complexity vapor). To accurately predict these behaviors, engineers cannot rely on standard linear approximations. Instead, classical conservation equations must be coupled with advanced, multi-parameter equations of state—such as the Martin-Hou or polytropic van der Waals models—to substitute the ideal gas law with equations that account for non-ideal compressibility and molecular complexity (Giulio Gori et al. in Accuracy assessment of the Non-Ideal Computational Fluid Dynamics model for siloxane MDM from the open-source SU2 suite; Camilla Cecilia Conti et al. in Shock losses and Pitot tube measurements in non-ideal supersonic and subsonic flows of Organic Vapors).
Key Foundational Work
A Study on Methane-Air Mixture Ignition in the Shock Tube (1984) — contributed 2 concept elements to this direction.