Abstract Two-dimensional compressible flows in radial equilibrium are investigated in the ideal dilute-gas regime and the non-ideal single-phase regime close to the liquid–vapour saturation curve and the critical point. Radial equilibrium flows along constant-curvature streamlines are considered. All properties are therefore independent of the tangential streamwise coordinate. A differential relation for the Mach number dependency on the radius is derived for both ideal and non-ideal conditions. For ideal flows, the differential relation is integrated analytically. Assuming a constant specific heat ratio $\gamma$, the Mach number is a monotonically decreasing function of the radius of curvature for ideal flows, with $\gamma$ being the only fluid-dependent parameter. In non-ideal conditions, the Mach number profile also depends on the total thermodynamic conditions of the fluid. For high molecular complexity fluids, such as toluene or hexamethyldisiloxane, a non-monotone Mach number profile is admissible in single-phase supersonic conditions. For Bethe–Zel'dovich–Thompson fluids, non-monotone behaviour is observed in subsonic conditions. Numerical simulations of subsonic and supersonic turning flows are carried out using the streamline curvature method and the computational fluid dynamics software SU2, respectively, both confirming the flow evolution from uniform flow conditions to the radial equilibrium profile predicted by the theory.
Introduction: Curvature and Fluid Complexity
In classical aerodynamics, fluids are typically modeled as ideal gases. Under this assumption, a flow in radial equilibrium—moving along curved streamlines like those found in turbine blades or duct bends—exhibits a predictable, monotone Mach number profile. Specifically, the Mach number is highest at the inner radius and decreases toward the outer radius.
However, many modern industrial applications, such as Organic Rankine Cycle (ORC) engines or supercritical $CO_2$ power plants, utilize complex fluids operating near their critical point or saturation curve. In these non-ideal regimes, standard assumptions fail. This research introduces the "planar radial equilibrium theory" to bridge the gap in understanding how these complex fluids behave under flow curvature.
Theoretical Framework and Methodology
The researchers derived a fundamental differential relation, termed the planar radial equilibrium equation, which links the Mach number ($M$) to the radius of curvature ($r$).
The study employed a multi-pronged approach:
- Analytical Integration: For ideal gases, the equation was integrated analytically, proving that the Mach number must always decrease as the radius increases.
- Thermodynamic Modeling: For non-ideal fluids, the differential equation was coupled with advanced thermodynamic libraries (REFPROP and FluidProp) to account for complex molecular interactions and the "fundamental derivative of gas dynamics" ($\Gamma$).
- Numerical Verification: Subsonic cases were validated using the Streamline Curvature Method, while supersonic cases were simulated using the open-source CFD software SU2 to account for potential shock waves.
Key Insights: Breaking Monotony
The most significant finding is that for High Molecular Complexity (HMC) and Bethe–Zel’dovich–Thompson (BZT) fluids, the Mach number profile can become non-monotone.
- The Role of $\Gamma$: In ideal gases, $\Gamma > 1$, ensuring monotone behavior. In complex fluids near the critical point, $\Gamma$ can drop below 1 or even become negative, leading to "non-classical" gasdynamics.
- Stagnation Sensitivity: Unlike ideal gases, where the profile depends solely on the specific heat ratio ($\gamma$), non-ideal profiles are highly sensitive to the initial stagnation pressure and temperature.
- Flow Evolution: CFD results confirmed that even if a flow starts uniform and parallel, it naturally evolves toward the predicted radial equilibrium profile as it traverses a curve.
Results and Validation
The study compared standard fluids like Nitrogen ($N_2$) and Carbon Dioxide ($CO_2$) with complex siloxanes like MM (hexamethyldisiloxane) and D6.
- Ideal Gas Confirmation: $M$ always decreases with $r$, with the rate of decrease influenced by molecular simplicity (higher $\gamma$).
- HMC Fluid Behavior: Supersonic flows of MM near the critical region displayed a distinct non-monotone "hump," where speed initially increases before decreasing.
- BZT Fluid Behavior: Non-monotone behavior was observed even in subsonic flows for D6, a hallmark of non-classical gasdynamics.
- Simulation Match: Numerical results showed excellent agreement with the analytical theory, validating the new planar radial equilibrium equation.
Conclusion
This work provides a foundational theoretical tool for engineers designing high-efficiency turbines. By accounting for curvature-induced non-ideal effects, designers can better predict and optimize the performance of systems using complex working fluids. Future work will look to incorporate viscous effects and 3D flow phenomena to further refine these models for real-world applications.
Summary updated