No article text was recorded for this version.
quasi-direct drive actuation
Version 2 of 277 papers119 conceptsfrozen 2026-10-04
Papers in this version
- Blog: Discussion Based on the Key Parameters About The Structural Design and Improvement Methods of Knee Exoskeleton Robots
- Blog: DexWrist: A Robotic Wrist for Constrained and Dynamic Manipulation
- Blog: Cable-Driven Actuation for Highly Dynamic Robotic Systems
- Blog: Mechanical Design, Analysis, and Dynamics Simulation of a Cable-Driven Wearable Flexible Exoskeleton System
- Blog: The Duke Humanoid: Design and Control For Energy Efficient Bipedal Locomotion Using Passive Dynamics
- Blog: Design guidelines for shoulder design of an anthropomorphic robotic arm
- Blog: A Variable Stiffness Actuator Module With Favorable Mass Distribution for a Bio-inspired Biped Robot
- Blog: A Novel Gripper with Integrated Rotary Unit and Force Control for Pick and Place Applications
- Blog: Quasi-Direct Drive for Low-Cost Compliant Robotic Manipulation
- Blog: D3-ARM: High-Dynamic, Dexterous and Fully Decoupled Cable-driven Robotic Arm
- Blog: Special Issue on Assistive and Rehabilitation Robotics
- Blog: Development of Wrist Interface Based on Fully Actuated Coaxial Spherical Parallel Mechanism for Force Interaction
- Blog: Improved efficiency in legged running using lightweight passive compliant feet
- Blog: Soft ankle exoskeleton to counteract dropfoot and excessive inversion
- Blog: Bipedal Humanoid Hardware Design: A Technology Review
- Blog: AGILOped: Agile Open-Source Humanoid Robot for Research
- Blog: Static Force Analysis of Foot of Electrically Driven Heavy-Duty Six-Legged Robot under Tripod Gait
- Blog: Learning to Control Highly Accelerated Ballistic Movements on Muscular Robots
- Blog: Grown-up NimbRo Robots Winning RoboCup 2017 Humanoid AdultSize Soccer Competitions
- Blog: Antagonistic Bowden-Cable Actuation of a Lightweight Robotic Hand: Toward Dexterous Manipulation for Payload Constrained Humanoids
- Blog: The NING Humanoid: The Concurrent Design and Development of a Dynamic and Agile Platform
- Blog: Design of a low-cost and lightweight 6 DoF bimanual arm for dynamic and contact-rich manipulation
- Blog: Safe & Accurate at Speed with Tendons: A Robot Arm for Exploring Dynamic Motion
- Blog: LEVA: A high-mobility logistic vehicle with legged suspension
- Blog: SpaceHopper: A Small-Scale Legged Robot for Exploring Low-Gravity Celestial Bodies
- Blog: NimbRo-OP2X: Adult-sized Open-source 3D Printed Humanoid Robot
- Blog: Effects of wearable resistance training on linear sprinting and jumping abilities in healthy populations: a systematic review and three-level meta-analysis
- Blog: RECONFIGURABLE MODULAR BAR STRUCTURE
- Blog: High-Payload Online Identification and Adaptive Control for an Electrically-actuated Quadruped Robot
- Blog: NimbRo-OP2: Grown-up 3D Printed Open Humanoid Platform for Research
- Blog: A simulation framework to determine optimal strength training and musculoskeletal geometry for sprinting and distance running
- Blog: Corrigendum: Small-Sized Reconfigurable Quadruped Robot With Multiple Sensory Feedback for Studying Adaptive and Versatile Behaviors
- Blog: Design of a Computer Controlled Manipulator for Robot Research
- Blog: 604 Active Worktable for Force Control of Robot Manipulators : Control System Design to Achieve Accurate Force Control
- Blog: Research on Synthesis Method of a Loop Decoupling Two-rotation Parallel Mechanism with Large Load Bearing Capacity
- Blog: Fast ground-to-air transition with avian-inspired multifunctional legs
- Blog: Learning-based Design and Control for Quadrupedal Robots with Parallel-Elastic Actuators
- Blog: A Robust Open-source Tendon-driven Robot Arm for Learning Control of Dynamic Motions
- Blog: Research and Experiments on Adaptive Root Cutting Using a Garlic Harvester Based on a Convolutional Neural Network
- Blog: SCALER: A Tough Versatile Quadruped Free-Climber Robot
- Blog: AllGaits: Learning All Quadruped Gaits and Transitions
- Blog: Fast ground-to-air transition with avian-inspired multifunctional legs
- Blog: ReachBot: A Small Robot for Large Mobile Manipulation Tasks
- Blog: Optimal Control of Walkers with Parallel Actuation
- Blog: Configuration Control for Physical Coupling of Heterogeneous Robot Swarms
- Blog: A Chain-Driven, Sandwich-Legged Quadruped Robot: Design and Experimental Analysis
- Blog: Designing Prosthetic Hands With Embodied Intelligence: The KIT Prosthetic Hands
- Blog: 3D active worktable for force control of robot manipulators : Application of a force sensor feedback controller
- Blog: PROFILING DESIGN AND OPTIMIZATION OF END-EFFECTOR FOR PINEAPPLE EYE REMOVAL
- Blog: Mechanical Design of a Cartesian Manipulator for Warehouse Pick and Place
- Blog: A System-of-Systems Bio-Inspired Design Process: Conceptual Design and Physical Prototype of a Reconfigurable Robot Capable of Multi-Modal Locomotion
- Blog: A Recipe for Electrically-Driven Soft Robots via 3D Printed Handed Shearing Auxetics
- Blog: A Co-Design Framework for Energy-Aware Monoped Jumping with Detailed Actuator Modeling
- Blog: Model-Based Coordinated Trajectory Tracking Control of Skid-Steer Mobile Robot with Timing-Belt Servo System
- Blog: Design of an Electromagnetic Actuator for an Insect-Scale Spinning-Wing Robot
- Blog: Soft pneumatic elbow exoskeleton reduces the muscle activity, metabolic cost and fatigue during holding and carrying of loads
- Blog: Design and Modeling of a Parallel-Pipe-Crawling Pneumatic Soft Robot
- Blog: Sensorized Soft Skin for Dexterous Robotic Hands
- Blog: 1105 Development of an Active Tool Holder for Robotized Weld Bead Grinding
- Blog: Joint Optimization of Robot Design and Motion Parameters using the Implicit Function Theorem
Showing 60 of 77 papers.
History & citation
Current · Permanent link
Cite this direction
Latest version (a living page):
@misc{lacuna_quasi_direct_drive_actuation_6427ff38,
title = {quasi-direct drive actuation},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/quasi-direct-drive-actuation/rdr_6427ff38d9694d55b17c4026bf291e81},
note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}This exact version (version 2, frozen text):
@misc{lacuna_quasi_direct_drive_actuation_6427ff38_v2,
title = {quasi-direct drive actuation},
author = {{Lacuna}},
howpublished = {Lacuna research direction},
year = {2026},
url = {https://lacuna.tiptreesystems.com/direction/quasi-direct-drive-actuation/rdr_6427ff38d9694d55b17c4026bf291e81/v/2},
note = {Version 2, frozen 2026-10-04. Accessed 2026-11-20},
}