Static Force Analysis of Foot of Electrically Driven Heavy-Duty Six-Legged Robot under Tripod Gait

Zhen Liu, Hongchao Zhuang, Haibo Gao, Zongquan Deng, Liang DingChinese 2018 · DOI

Abstract

The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhile, its load capacity also affects its application range. To reduce the power consumption, increase the load to mass ratio, and improve the stability of robot, the relationship between the walking modes and the forces of feet under the tripod gait are researched for an electrically driven heavy-duty six-legged robot. Based on the configuration characteristics of electrically driven heavy-duty six-legged, the typical walking modes of robot are analyzed. The mathematical models of the normal forces of feet are respectively established under the tripod gait of typical walking modes. According to the MATLAB software, the variable tendency charts are respectively gained for the normal forces of feet. The walking experiments under the typical tripod gaits are implemented for the prototype of electrically driven heavy-duty six-legged robot. The variable tendencies of maximum normal forces of feet are acquired. The comparison results show that the theoretical and experimental data are in the same trend. The walking modes which are most available to realize the average force of distribution of each foot are confirmed. The proposed method of analyzing the relationship between the walking modes and the forces of feet can quickly determine the optimal walking mode and gait parameters under the average distribution of foot force, which is propitious to develop the excellent heavy-duty multi-legged robots with the lower power consumption, larger load to mass ratio, and higher stability.

Introduction

Heavy-duty six-legged robots (hexapods) are ideal for navigating the rugged terrain of other planets, but they face a major hurdle: energy efficiency. Because these robots are massive and carry heavy payloads, their joints consume significant power just to support their own weight. The "normal force"—the vertical force exerted by the ground on each foot—is the primary factor driving this power consumption. If the weight isn't distributed evenly across the legs during a gait, certain joints must work much harder, leading to wasted energy and reduced stability. While much research exists on hexapod gaits, there is a gap in understanding how specific walking modes (the orientation and movement pattern of the legs) influence these foot forces in heavy-duty applications.

Methodology

The researchers combined mathematical modeling with physical experimentation to analyze the static forces acting on the robot's feet.

  1. Kinematic and Static Modeling: They established coordinate systems for a single leg (comprising the coxa, thigh, and shin) and the entire robot body. Using Jacobian matrices and equilibrium equations, they derived mathematical models to calculate the normal force on each foot during a tripod gait.
Structure of a single leg showing the coxa, thigh, and shin components.
  1. Walking Mode Classification: Four distinct walking modes were defined:
  2. Ant-type: Legs oriented longitudinally.
  3. Crab-type: Legs oriented laterally.
  4. Mixture-type I & II: Hybrid configurations combining elements of both.
  5. Simulation and Validation: MATLAB was used to simulate how changing the "step pitch" and "initial abductor angle" affected foot forces. These results were validated using a heavy-duty prototype equipped with six-axis force/torque sensors on its feet.

Walking Mode Analysis and Insights

The study revealed that the specific walking mode drastically changes the force distribution across the robot's legs.

  • Normal Force Dominance: The study confirms that normal forces are significantly larger than tangential forces, making them the critical variable for optimizing joint torque and power consumption.
  • Mode Comparisons: In the Ant-type mode, the normal force on certain legs can fluctuate by as much as 432 N, whereas in Mixture-type I, that fluctuation drops to just 141 N. In the Crab-type walking mode, the normal forces on the outer legs are mathematically identical, simplifying control but resulting in higher overall force ranges.
Top view of the hexapod robot illustrating the leg configuration and coordinate systems.
  • Optimal Configuration: While the Ant-type mode allows for the highest walking speeds, it is the most difficult to balance. The Mixture-type II mode emerged as the optimal solution, providing a superior balance of speed, stability, and even force distribution.

Key Results

The experimental data closely followed the trends predicted by the mathematical models, validating the theoretical approach.

  • Mixture-type I showed the most stable force distribution with the smallest range of maximum normal force (141 N).
  • Crab-type was the least efficient in terms of distribution, with a wide force range of 638.4 N.
  • Mixture-type II is recommended for heavy-duty robots. It maintains a relatively low force range (157 N) while offering better speed and load-to-mass characteristics than Mixture-type I.

Conclusion

This research demonstrates that selecting the appropriate walking mode is crucial for the efficiency and stability of heavy-duty hexapods. By optimizing the "Mixture-type II" mode, developers can create robots with lower power consumption and higher stability for demanding missions. Future work will expand this model to include dynamic walking conditions and testing on complex, non-flat terrains.

Summary updated

Abstract

The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhile, its load capacity also affects its application range. To reduce the power consumption, increase the load to mass ratio, and improve the stability of robot, the relationship between the walking modes and the forces of feet under the tripod gait are researched for an electrically driven heavy-duty six-legged robot. Based on the configuration characteristics of electrically driven heavy-duty six-legged, the typical walking modes of robot are analyzed. The mathematical models of the normal forces of feet are respectively established under the tripod gait of typical walking modes. According to the MATLAB software, the variable tendency charts are respectively gained for the normal forces of feet. The walking experiments under the typical tripod gaits are implemented for the prototype of electrically driven heavy-duty six-legged robot. The variable tendencies of maximum normal forces of feet are acquired. The comparison results show that the theoretical and experimental data are in the same trend. The walking modes which are most available to realize the average force of distribution of each foot are confirmed. The proposed method of analyzing the relationship between the walking modes and the forces of feet can quickly determine the optimal walking mode and gait parameters under the average distribution of foot force, which is propitious to develop the excellent heavy-duty multi-legged robots with the lower power consumption, larger load to mass ratio, and higher stability.
BibTeX
@inproceedings{liu2018static,
  author = {Zhen Liu and Hongchao Zhuang and Haibo Gao and Zongquan Deng and Liang Ding},
  title = {{Static Force Analysis of Foot of Electrically Driven Heavy-Duty Six-Legged Robot under Tripod Gait}},
  booktitle = {Chinese},
  year = {2018},
  doi = {10.1186/s10033-018-0263-0},
}
Figure