When engineering structures interact with the earth—whether digging a subway tunnel, building a high arch dam, or expanding a highway subgrade—predicting how the ground will deform and fail is a critical challenge. Unlike manufactured materials like steel, which exhibit predictable, symmetric behavior under tension and compression, geological materials like soil and rock are highly non-linear, pressure-dependent, and prone to permanent, irreversible deformation.
To simulate these materials accurately, researchers rely on elastoplastic constitutive models. These mathematical frameworks define exactly when a material stops flexing temporarily (elastic behavior) and begins to fail or flow permanently (plastic behavior). Understanding why these models work requires looking at how they capture the internal friction, cohesion, and pressure-dependent strength of the earth.
The Mechanics of Friction and Cohesion
The most widely used framework for geological materials is the Mohr-Coulomb criterion. To understand its intuition, imagine sliding a heavy box across a rough floor. The frictional resistance depends directly on the weight of the box: press down harder, and it becomes much more difficult to slide.
In geological formations, the "weight" corresponds to normal stress ($\sigma$), and the "sliding" corresponds to shear failure along a slip plane. As explained by Yong Yin in a study on Stability and displacement analysis of interlayered soft-hard slopes under seismic loading, a linear yield criterion defines this threshold by relating shear stress directly to normal stress. The Mohr-Coulomb criterion expresses the maximum shear strength ($\tau$) as:
$$\tau = c + \sigma \tan\phi$$
Where:
- $c$ is cohesion, the intrinsic "stickiness" or bonding strength of the material when no pressure is applied.
- $\phi$ is the internal friction angle, representing how much the material's shear strength increases as it is compressed.
By capturing these two parameters, the model accurately predicts the onset of yielding. For instance, Zhang et al. utilized this framework in Effects of Foundation Excavation on Metro Tunnels at Different Locations and Performance of Corresponding Reinforcement Measures: A Case of Shenzhen Metro Line 11, China to map out distinct deformation zones around excavated metro tunnels, capturing the stress-strain relationship up to the point of yielding. Similarly, Wu et al. combined the criterion with an elastoplastic framework in Numerical Simulation Study of Rainfall-Induced Saturated–Unsaturated Landslide Instability and Failure to demonstrate how rainwater infiltration reduces effective normal stress, lowering the shear strength threshold and triggering landslides.
The versatility of this friction-and-cohesion envelope allows it to transcend traditional soil mechanics. For example, Li et al. adapted the Mohr-Coulomb failure envelope in A Constitutive Model for Circular and Square Cross-Section Concrete Confined with Aramid FRP Laminates to predict the compressive strength of confined concrete, proving that the physics of pressure-dependent confinement applies equally well to retrofitted structural columns.
Shear Stress (τ)
^
| / Yield Envelope: τ = c + σ tan(φ)
| /
| / <-- Plastic Yielding Zone
| /
| ----------/
| | /
| | / <-- Elastic Zone (Safe)
| | c /
| | /
+--+-----+-----------------------------> Normal Stress (σ)
Smoothing the Corners: The Drucker-Prager Criterion
While the Mohr-Coulomb model is highly intuitive, it introduces mathematical challenges when scaled to three dimensions. In a 3D stress space, the Mohr-Coulomb yield surface forms a hexagonal pyramid. The sharp "corners" of this hexagon create mathematical discontinuities where derivatives are undefined, causing numerical instability and convergence failures during computer simulations.
To solve this, researchers frequently turn to the Drucker-Prager yield criterion. This model smooths out the hexagonal pyramid into a continuous, circular cone. Beyond its numerical elegance, it introduces a deeper physical insight: it accounts for the influence of hydrostatic pressure (the average compressive stress from all directions) on the material's shear strength.
As noted by WU Li-ming et al. in Analysis of Influences of Shield Tunneling Method on the Existing Upper Road Structures, this mathematical framework provides a highly accurate representation of soil deformation under complex traffic and tunneling loads. The model is particularly effective in extreme environments. For instance, Wei et al. applied the Drucker-Prager model in Research on the Postural Stability of Underwater Bottom Platforms with Different Burial Depths to capture the complex plastic behavior of seabed sediments subjected to combined structural weights and ocean currents.
Furthermore, the model can be extended to handle fluid interactions within the geological matrix. In Study on the deformation mechanism of abutment slope and its influence on the dam during the impoundment of high arch dam, X W Wang et al. extended the Drucker-Prager criterion to include pore pressure effects. This allowed the authors to distinguish between temporary elastic flexing and permanent, irreversible structural shifts in rock masses under varying hydraulic loads during reservoir filling.
Advanced and Specialized Formulations
While Mohr-Coulomb and Drucker-Prager serve as the workhorses of geotechnical simulation, specific soil conditions require specialized formulations to capture time-dependent or state-dependent behaviors:
- The Duncan-Chang Model: Useful for capturing non-linear stress-strain relationships before a material begins to soften. Cao et al. utilized this in Investigation of the Mechanical Properties of Reinforced Calcareous Sand Using a Permeable Polyurethane Polymer Adhesive to accurately map the pre-softening behavior of polymer-reinforced sand.
- The UH Model: Designed for over-consolidated soils (soils that have historically experienced higher pressures than they do today). In Numerical simulation of creep settlement for high railway foundations based on the UH model considering time effect, Chen and Wang extended the Modified Cam-Clay framework by using a unified hardening parameter to simulate long-term, time-dependent "creep" settlement in high-speed railway foundations.
Hybrid Modeling and Soil-Structure Interaction
In practical engineering scenarios, geological materials do not exist in isolation; they interact directly with man-made structures like concrete linings, steel piles, and building frames. Simulating an entire city block or a massive tunnel using complex elastoplastic equations for every single component would be computationally prohibitive.
To balance accuracy and efficiency, engineers deploy a hybrid modeling strategy:
- Geological Zones: Modeled using non-linear elastoplastic criteria (like Mohr-Coulomb) to capture failure, shifting, and plastic flow.
- Structural Zones: Modeled using simple linear elastic equations, assuming the concrete or steel will remain safely within its structural limits without yielding.
This dual-strategy is highly effective for analyzing complex construction phases. Chun - lai Chen et al. applied this hybrid approach in Finite element simulation of shallow - buried and mining tunnel ling in adjacent frame structures, applying the Mohr-Coulomb criterion to the soil and reinforcement zones while treating nearby building frames as linear elastic. This isolated how tunnel-induced ground shifts translate into structural concrete stresses.
Similarly, Bai et al. adopted this exact division of labor in Numerical Study on Stratigraphic and Structural Deformation Patterns Considering Surface Load with Pile-Beam-Arch Method Construction to quantify how multi-stage subway station excavations affect ground settlement.
+---------------------------------------------------+
| Surface Traffic Load |
+---------------------------------------------------+
| [Linear Elastic Model] |
| Concrete Roadway / Building Foundations |
+---------------------------------------------------+
| ================= INTERFACE =================== |
+---------------------------------------------------+
| [Elastoplastic Mohr-Coulomb Model] |
| Soil / Rock Layers (Yielding, Friction, Flow) |
| |
| ( O ) <-- Tunnel Excavation |
+---------------------------------------------------+
This hybrid methodology also extends to dynamic and high-intensity loading scenarios. Yan et al. combined cohesion, friction angle, and elastic modulus parameters in Study on Vibration Characteristics of Piers and Foundation Sites in Seasonal Frozen Soil Areas under Train Load to simulate how high-speed train vibrations propagate through seasonally frozen soils.
When dealing with extreme shockwaves, such as those studied by Liao Leiyi et al. in Analysis of the vibration impact of railway tunnel blasting excavation on existing highway tunnels, the Mohr-Coulomb model allows the simulation to absorb and distribute high-intensity blasting energy through plastic deformation, revealing exactly how shockwaves hit adjacent underground structures.
By grounding numerical simulations in the fundamental physics of friction, cohesion, and pressure-dependent yielding, elastoplastic constitutive models allow engineers to safely push the boundaries of underground infrastructure, ensuring that structures stand firm on an ever-shifting earth.
Key Foundational Work
Study on Vibration Characteristics of Piers and Foundation Sites in Seasonal Frozen Soil Areas under Train Load (2019) — contributed 1 concept elements to this direction.
Analytical Solution of Ground Stress Induced by Shallow Tunneling with Arbitrary Distributed Loads on Ground Surface (2019) — contributed 1 concept elements to this direction.
Finite element simulation of shallow - buried and mining tunnel ling in adjacent frame structures (2014) — contributed 1 concept elements to this direction.