Research on the Postural Stability of Underwater Bottom Platforms with Different Burial Depths

Yong Wei, Nan Li, Ming C. Wu, Daming ZhouSensors 2024 · DOI

TL;DR

This paper investigates how deep an underwater bottom platform needs to be buried to remain stable under a 3-knot ocean current. By combining fluid dynamics and structural simulations, they found that a burial depth greater than 0.6 meters is crucial for maintaining stability, with a deflection angle less than 5 degrees. This research is vital for ensuring the reliable operation of underwater sensors in challenging marine environments.

What Problem Does This Paper Address?

Underwater bottom platforms are essential for various applications like communication, early warning, and monitoring. However, their functionality can be compromised by environmental forces such as ocean currents, waves, and seismic activity, which can cause them to shift their position (posture) and disrupt their sensing capabilities. Ensuring the postural stability of these platforms is therefore of significant practical importance for reliable underwater operations. While previous studies have explored soil-structure interactions for foundations, this research specifically addresses the combined effects of ocean currents and burial depth on the stability of a cylindrical underwater platform.

Methods

The researchers employed a two-pronged simulation approach:

  • Computational Fluid Dynamics (CFD): They used CFD to model the flow of a 3-knot ocean current around the underwater platform. This allowed them to determine the velocity distribution and the resulting forces and torques exerted by the water on the platform. The realizable turbulence model was chosen for its suitability in complex shear flows.
  • Finite Element Method (FEM): FEM was used for the structural analysis. First, it determined the initial equilibrium state of the platform after being buried in the seabed, considering negative buoyancy and gravity. Subsequently, the forces calculated from the CFD analysis were applied to the structural model to assess the platform's displacement, deflection angle, and overall postural stability at various burial depths.

A key aspect of their method is the use of the Drucker-Prager constitutive model to describe the plastic mechanical characteristics of the seabed sediment, which is a more advanced approach than simpler models.

Datasets

Not discussed in the paper. The study relies on simulated data generated through CFD and FEM modeling.

Key Insights and Ideas

  • Burial Depth is Critical: The study clearly demonstrates that the depth to which the platform is buried is the primary factor in its stability against ocean currents.
  • Negative Buoyancy and Sediment Force Equilibrium: After initial burial, the platform sinks until its negative buoyancy is balanced by the upward force from the sediment. Deeper burial leads to less sinking.
  • Ocean Current Dominates Deflection: While initial sinking is influenced by buoyancy, the significant deflections and potential instability are driven by the ocean current.
  • Sediment Yielding: At shallower burial depths (0.5m), the sediment experiences plastic deformation under the combined load of the platform and current, indicating instability.
  • Drucker-Prager Model's Utility: The use of the Drucker-Prager model effectively captures the complex plastic behavior of the seabed sediment, which is crucial for accurate stability analysis.

Key Results

  • Stability Threshold: A burial depth greater than 0.6 meters is identified as the threshold for maintaining postural stability under a 3-knot sea current, with a deflection angle less than 5 degrees.
  • Deflection Reduction: As burial depth increases from 0.6m to 0.8m, the maximum displacement of the platform significantly decreases (from 477.7 mm to 59.6 mm), and the deflection angle reduces (from 4.567° to 0.569°).
  • Sediment Stress: While sediment stress generally remains below the yield stress (26.1 kPa) during initial equilibrium, it exceeds this limit under the effect of the 3-knot current at burial depths of 0.5m to 0.8m, leading to plastic deformation. The maximum sediment stress observed was 34.5 kPa at a 0.6m burial depth under current.
  • Force and Torque: The equivalent force exerted by the 3-knot current on the platform decreases slightly with increasing burial depth, from 1450 N at 0.5m to 1338 N at 0.8m. Similarly, the equivalent moment of force decreases from 4060 Nm to 3660 Nm.

Limitations and Future Work

  • Single Platform Type: The study focuses on a cylindrical platform. Future work could explore the stability of platforms with different geometries.
  • Simplified Current: The analysis uses a uniform 3-knot ocean current. Real-world scenarios involve more complex and variable current patterns, including wave-induced currents.
  • Sediment Properties: While the Drucker-Prager model is used, the specific material parameters for the sediment are based on typical values. Variations in sediment properties could influence the results.
  • Other Environmental Loads: The study primarily focuses on ocean currents. Future research could incorporate the effects of seismic loads, wave action, and their combined influence on platform stability.
  • Experimental Validation: The findings are based on numerical simulations. Experimental validation would significantly strengthen the conclusions.

Summary updated

Abstract

The bottom platform is an important underwater sensor that can be used in communications, early warning, monitoring, and other fields. It may be affected by earthquakes, winds, waves, and other loads in the working environment, causing changes in posture and affecting its sensing function. Therefore, it is of practical engineering significance to analyze the force conditions and posture changes in the bottom platform. In order to solve the problem of postural stability of the underwater bottom platform, this paper establishes a fluid and structural simulation model of the underwater bottom platform. First, computational fluid dynamics (CFD) technology is used to solve the velocity distribution and forces in the watershed around the bottom platform under a 3 kn ocean current, where the finite element method (FEM) numerical calculation method is used to solve the initial equilibrium state of the bottom platform after it is buried. On this basis, this paper calculates the forces on the bottom platform and the posture of the bottom platform at different burial depths under the action of ocean currents. Additionally, the effects of different burial depths on the maximum displacement, deflection angle, and postural stability of the bottom platform are studied. The calculation results show that when the burial depth is greater than 0.6 m, and the deflection angle of the bottom platform under the action of the 3 kn sea current is less than 5°, the bottom platform can maintain a stable posture. This paper could be used to characterize the postural stability of underwater bottom platforms at different burial depths for the application of underwater sensors in ocean engineering.
BibTeX
@inproceedings{wei2024research,
  author = {Yong Wei and Nan Li and Ming C. Wu and Daming Zhou},
  title = {{Research on the Postural Stability of Underwater Bottom Platforms with Different Burial Depths}},
  booktitle = {Sensors},
  year = {2024},
  doi = {10.3390/s24103034},
}
Figure