Numerical Simulation Study of Rainfall-Induced Saturated–Unsaturated Landslide Instability and Failure

Zhenyu Wu, Gang Yang, Wen J. Li, Xiangling Chen, Fei Liu, Yong ZhengWater 2025 · DOI

TL;DR

This paper uses numerical simulations to investigate how rainfall, its patterns, and intensity affect landslide stability. It reveals that heavy rainfall creates a rising saturation zone, leading to slip surfaces and potential failure, with specific rainfall patterns like "pre-peak" being particularly destabilizing. The findings offer crucial insights for predicting and mitigating rainfall-induced landslides.

What Problem Does This Paper Address?

Landslides are a major natural disaster, and rainfall is a primary trigger. While the general link between rainfall and slope instability is known, the complex interplay between rainfall characteristics (intensity, duration, and temporal patterns) and the resulting hydrological and mechanical responses within saturated-unsaturated slopes remains a critical area for detailed study. Understanding these nuances is vital for accurate landslide prediction and effective hazard mitigation, especially in regions prone to intense rainfall events. This paper aims to fill this gap by providing a comprehensive numerical analysis of how different rainfall scenarios impact slope stability.

Methods

The researchers employed a fluid-solid coupling numerical analysis using the ABAQUS finite element software. This approach simultaneously models the flow of water within the soil (seepage field) and the resulting mechanical deformation and stress changes (displacement field).

Key methodological components include:

  • Saturated-Unsaturated Slope Model: A detailed 2D model of a slope was created, incorporating the concept of a transient wetting front and pore water pressure (PWP) variations in both saturated and unsaturated zones.
  • Constitutive Model: The soil behavior was modeled using the Mohr-Coulomb strength criterion, a standard approach for analyzing soil mechanics, combined with an elastoplastic framework to capture stress-displacement relationships.
  • Strength Reduction Method (SRM): This widely used technique was applied to determine the safety factor (SF) of the slope. SRM involves progressively reducing the soil's shear strength parameters until the slope reaches a state of limit equilibrium, indicating failure.
  • Rainfall Simulation: Four distinct rainfall patterns were simulated: uniform, triangular, pre-peak, and post-peak. These patterns were designed to represent different temporal distributions of rainfall intensity over a fixed duration and cumulative amount.
  • Parameterization: Soil parameters were derived from existing literature for similar geological conditions, acknowledging the lack of specific experimental data for unsaturated soils in the study region.

Datasets

The study did not introduce new datasets or benchmarks. Instead, it utilized:

  • Local Rainfall Data: Information on local rainfall patterns and meteorological classifications was used to inform the selection of rainfall intensities and durations for the simulations.
  • Literature-Based Soil Properties: Soil parameters for the numerical model were adopted from previous studies on unsaturated soil slopes, particularly those conducted in the Three Gorges Reservoir area.

Key Insights and Ideas

  • The "Rising Tide" of Saturation: Heavy rainfall doesn't just saturate the surface; it creates a transient saturation zone that continuously moves upward within the slope. This upward progression is crucial as it can form a continuous slip surface, directly leading to instability.
  • Pre-Peak is Particularly Perilous: Among the tested rainfall patterns, the "pre-peak" pattern (where intensity decreases over time) proved to be the most detrimental. It caused the largest reduction in the safety factor and led to the earliest slope failure, highlighting the critical importance of the timing of intense rainfall.
  • PWP as a Direct Indicator: Pore water pressure (PWP) and displacement show a strong positive correlation with rainfall intensity. Higher intensity means more water infiltration, leading to higher PWP and greater deformation, making the slope more susceptible to failure.
  • The Toe is the First to Go: The simulations consistently showed that the wetting front and initial failure often occur at the toe of the slope, which then propagates upwards. This suggests that monitoring and reinforcement efforts should prioritize the slope toe.
  • Rainfall Intensity Dictates Speed: Not only does higher rainfall intensity increase the likelihood of failure, but it also shortens the time required for instability to develop. This has direct implications for early warning systems.

Key Results

  • Safety Factor Reduction: Under continuous heavy rainfall (10 mm/h for 90 h), the slope's safety factor (SF) decreased from an initial 1.23 to 0.965 by the end of the rainfall, indicating a transition from stable to unstable conditions.
  • Rainfall Pattern Impact: The pre-peak rainfall pattern resulted in the earliest failure and the lowest minimum SF compared to uniform, triangular, and post-peak patterns, underscoring its destabilizing effect.
  • Rainfall Intensity Impact: Higher rainfall intensities (e.g., 10 mm/h vs. 2 mm/h) led to significantly greater maximum horizontal displacements (25 mm vs. 17 mm at the end of rainfall) and more extensive plastic strain zones, indicating more severe slope damage.
  • PWP Evolution: The study quantified how PWP increases with rainfall intensity and duration, directly impacting matric suction and shear strength. For instance, at the top of the slope, PWP values shifted from negative (unsaturated) to positive (saturated) ranges under heavy rainfall.

Limitations and Future Work

  • Simplified Model: The authors acknowledge that the numerical model is simplified, representing a homogeneous slope with idealized geometry. Real-world landslides often involve complex geological layering, material heterogeneity, and pre-existing discontinuities, which are not fully captured.
  • Parameter Uncertainty: Soil parameters were adopted from existing literature due to a lack of specific experimental data for unsaturated soils in the study region. This introduces potential uncertainty in the simulation results.
  • Future Work: The paper suggests that future research could focus on:
  • Investigating the influence of more complex rainfall scenarios and longer durations.
  • Incorporating more sophisticated constitutive models to better represent soil behavior under various conditions.
  • Conducting field-scale monitoring and experimental studies to validate numerical findings and refine model parameters.
  • Exploring the effectiveness of different mitigation measures under various rainfall conditions.

Summary updated

Abstract

Rainfall infiltration is a key factor affecting the stability of the slope. To study the impact of rainfall on the instability mechanism and stability of slopes, this paper employs numerical simulation to establish a rainfall infiltration slope model and conducts a saturated–unsaturated slope flow and solid coupling numerical analysis. By combining the strength reduction method with the calculation of slope stability under rainfall infiltration, the safety factor of the slope is obtained. A comprehensive analysis is conducted from the perspectives of the seepage field, displacement field and other factors to examine the impact of heavy rainfall patterns and rainfall intensities on the instability mechanism and stability of the slope. The results indicate that heavy rainfall causes the transient saturation zone within the landslide body to continuously move upward, forming a continuous sliding surface inside the slope, which may lead to instability and sliding of the soil in the upper part of the slope toe. The heavy rainfall patterns significantly affect the temporal and spatial evolution of pore water pressure, displacement and safety factors of the slope. Pore water pressure and displacement show a positive correlation with the rainfall intensity at various times during heavy rainfall events. The pre-peak rainfall pattern causes the largest decrease in the safety factor of the slope, and the slope failure occurs earlier, which is the most detrimental to the stability of the slope. The rainfall intensity is inversely proportional to the safety factor. As the rainfall intensity increases, the decrease in the slope’s safety factor becomes more significant, and the time required for slope instability is also shortened. The results of this study provide a scientific basis for analyzing rainfall-induced slope instability and failure.
BibTeX
@inproceedings{wu2025numerical,
  author = {Zhenyu Wu and Gang Yang and Wen J. Li and Xiangling Chen and Fei Liu and Yong Zheng},
  title = {{Numerical Simulation Study of Rainfall-Induced Saturated–Unsaturated Landslide Instability and Failure}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17152229},
}
Figure