Abstract
Seasonally frozen regions are widely distributed across Northern China, where extensive high-speed railway networks have been constructed. The phenomena of seasonal frost heave and thaw settlement in subgrades present a significant challenge to the strict track irregularity standards required for high-speed operations. This study analyzes state detection and in-situ monitoring data from the 2012-2013 and 2013-2014 winter periods to identify the typical rules governing subgrade deformation. The research characterizes frost depth development into two primary stages—steadily rapid development and bi-directional thawing—and defines five distinct stages of frost heave deformation. These findings provide critical technical support for the construction, operation, and maintenance of high-speed railways in severely cold climates.
Introduction
High-speed railways require exceptional track smoothness to ensure safety at high velocities. In seasonally frozen regions, the ground undergoes "frost heave" (upward expansion as soil moisture freezes) during winter and "thaw settlement" (sinking as ice melts) in spring. This freeze-thaw cycle warps the railway subgrade, creating track irregularities. Understanding the precise spatio-temporal mechanics of how engineered railway subgrades respond to these cycles compared to natural soil is vital for maintaining infrastructure integrity in cold climates.
Methodology and Data
Researchers implemented an automated, in-situ field monitoring system along a high-speed railway line in Northeast China. The study tracked real-world subgrade temperatures, frost depths, and physical deformations over two consecutive winter periods (2012-2013 and 2013-2014). By correlating atmospheric temperature fluctuations with ground displacement, the team mapped the evolution of the subgrade throughout the freeze-thaw cycle. The engineered subgrade's frost depth was also compared against the natural frost depth of the surrounding local soil to identify the impact of railway construction materials on thermal conductivity.
Characterizing the Frost Heave Cycle
The study identifies that the freeze-thaw cycle follows five distinct phases rather than a simple binary transition:
- Initial Fluctuation: Minor deformations occurring as temperatures hover around 0°C.
- Rapid Progress: Sharp temperature drops leading to fast heave development.
- Slow/Sustainable Progress: Deep freezing accompanied by stable, sustained heave.
- Fluctuated Thaw Settlement: Surface melting while deep soil remains frozen, trapping water and causing unstable settlement.
- Steady Thaw Settlement: Full melting of the frozen layer and final residual deformation.
Frost Depth and Thawing Mechanics
A key finding is that engineered subgrades freeze significantly deeper than surrounding natural soil—typically 1.2 to 1.6 times deeper. This is attributed to the high thermal conductivity and lower water content of engineered filling materials. Furthermore, when spring arrives, the subgrade experiences "bi-directional thawing." The surface melts due to rising air temperatures while the deep frost line simultaneously rises from below as the ground warms from the bottom up.
Key Results
- Critical Layer: The graded crushed rock layer in the upper subgrade is the primary source of deformation, accounting for approximately 65% to 68% of total frost heave.
- Thermal Multiplier: The maximum frost depth in the engineered subgrade averaged a 1.4x multiplier over natural soil in 2012-2013 and 1.2x in 2013-2014.
- Geographic and Climatic Factors: Frost depth increases linearly with latitude. Additionally, the severity of the winter dictates heave magnitude; the milder 2013-2014 winter saw an average maximum frost depth 24 cm less than the previous year.
- Maximum Recorded Depth: The study recorded an absolute maximum frost depth of 300 cm at a specific monitoring station, highlighting the extreme conditions these tracks must withstand.
Conclusion
This research identifies the graded crushed rock layer as the critical failure point for track irregularity due to frost heave. While the study provides a robust framework for understanding these cycles over two years, future research will focus on the specific freeze-thaw mechanisms and material properties of graded aggregates to develop more effective physical mitigation strategies for high-speed rail infrastructure.
Summary updated