A New Full-Aperture Reflective Null Measuring Method for Conformal Dome

Xudong Yan, Junhua Wang, Min XuJournal of the Optical Society of Korea 2016 · DOI

Abstract

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be $\lambda/30$ ($\lambda = 3.39\ \mu\text{m}$) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.

Introduction

Modern high-speed missiles increasingly utilize "conformal domes"—ellipsoidal or aspheric windows—to optimize aerodynamic performance and reduce radar cross-sections. However, these aerodynamically superior shapes present significant challenges for optical metrology. Their high steepness (fineness ratio) and large apertures often cause traditional testing methods to fail. Contact methods are prohibitively slow and lack necessary precision, while sub-aperture stitching is complex to implement on such steep curves. Furthermore, conventional refractive null tests rely on multiple lenses that are susceptible to material uniformity issues and alignment difficulties.

Methodology

To address these challenges, we propose a Full-Aperture Reflective Null Test. This streamlined approach utilizes a Mid-Infrared (MIR) Fizeau interferometer operating at $3.39\ \mu\text{m}$ and a single, high-precision aspheric reflective compensator.

Optical layout of the full-aperture reflective null test system showing the dome and aspheric compensator.

The system design, optimized using ZEMAX, places an even aspheric mirror behind the dome. This mirror is specifically contoured to reflect the distorted wavefront passing through the dome back along its original path, effectively "nulling" the aberrations in a perfect specimen. The research involved rigorous sensitivity analysis of assembly errors (tilt, decenter, defocus) and manufacturing tolerances. A Monte Carlo simulation of 5,000 scenarios was conducted to verify the system's ability to maintain an accuracy of $\lambda/30$ under realistic laboratory conditions.

Analysis and Key Insights

The transition from refractive to reflective compensation offers several critical advantages. By using a single mirror instead of a multi-lens group, we eliminate errors stemming from internal material inhomogeneities in glass. Mirrors can also be fabricated to higher precision than complex lens assemblies.

A key finding of our analysis is the "Sensitivity Hierarchy": the system is approximately twice as sensitive to alignment errors in the compensator as it is to errors in the dome itself. This provides clear operational guidance, suggesting that alignment efforts should prioritize the compensator.

Wavefront RMS sensitivity to tilt for both the dome and the compensator.

Additionally, the system demonstrated surprising robustness to "defocus"—the axial distance between the dome and compensator—tolerating up to $1.7\text{ mm}$ of displacement without compromising accuracy. This robustness greatly simplifies the physical assembly process in a laboratory environment.

Results and Discussion

The proposed method achieved a verified measurement accuracy of $\lambda/30$ (at $\lambda = 3.39\ \mu\text{m}$), meeting the stringent requirements for high-performance infrared optical domes. We observed a perfectly linear relationship between compensator surface errors and the final wavefront error, simplifying performance prediction based on component quality.

Experimental validation using a $120\text{ mm}$ diameter elliptical dome prototype confirmed the practicality of the setup. While the current implementation is optimized for the mid-infrared spectrum, adaptation for visible light is possible but would require significantly tighter manufacturing tolerances for the aspheric compensator. Future work will focus on improving alignment precision for tilt and decenter and exploring more universal compensator designs to accommodate various dome geometries.

Summary updated

Abstract

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be λ/30 (λ =3.39 μm) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.
BibTeX
@article{yan2016new,
  author = {Xudong Yan and Junhua Wang and Min Xu},
  title = {{A New Full-Aperture Reflective Null Measuring Method for Conformal Dome}},
  journal = {Journal of the Optical Society of Korea},
  year = {2016},
  doi = {10.3807/josk.2016.20.1.174},
}
Figure