Abstract: Curved and conformal optics offer significant advantages by unlocking additional geometric degrees of freedom for optical design. These capabilities enable enhanced optical performance and are essential for meeting non-optical constraints, such as those imposed by ergonomics, aerodynamics, or wearability. However, existing fabrication techniques such as direct electron or laser beam writing on curved substrates, and soft-stamp-based transfer or nanoimprint lithography suffer from limitations in scalability, yield, geometry control, and alignment accuracy. Here, we present a scalable fabrication strategy for curved and conformal metasurface optics leveraging thermoforming, an industry-standard, high-throughput manufacturing process widely used for shaping thermoplastics. Our approach uniquely enables wafer-scale production of highly curved metasurface optics, achieving sub-millimeter radii of curvature and micron-level alignment precision. To guide the design and fabrication process, we developed a thermorheological model that accurately predicts and compensates for the large strains induced during thermoforming. This allows for precise control of metasurface geometry and preservation of optical function, yielding devices with diffraction-limited performance. As a demonstration, we implemented an artificial compound eye comprising freeform micro-metalens arrays. Compared to traditional micro-optical counterparts, the device exhibits an expanded field of view, reduced aberrations, and improved uniformity, highlighting the potential of thermoformed metasurfaces for next-generation optical systems.
Introduction
Flat optics, specifically metasurfaces, are transforming lens design by significantly reducing the size and weight of optical components. However, transitioning these flat optics into curved or conformal geometries provides additional degrees of freedom, enabling wider fields of view and superior aberration correction. Such shapes are also critical for meeting the ergonomic and aerodynamic requirements of AR glasses, wearable sensors, and drone cameras.
Current fabrication methods for curved metasurfaces face significant hurdles. Direct laser or electron beam writing on curved substrates is prohibitively slow and expensive for mass production. Transfer methods using elastomer stamps often suffer from low yield, unpredictable warping, and poor alignment precision. This research introduces a scalable fabrication strategy using thermoforming, an industry-standard process, to overcome these limitations.
Methods: Thermoforming and Alignment
The core innovation lies in decoupling nanoscale patterning from macroscopic shaping. The workflow begins with patterning amorphous silicon (a-Si) metasurfaces on a flat glass wafer via electron beam lithography. These are then encapsulated in a thermoplastic polymer (PVC) and chemically released to create a flexible, metasurface-embedded sheet.
Alignment is achieved using interferometric microscopy to track Newton's rings, ensuring micron-level precision between the metasurface and the mold. During thermoforming, the plastic sheet is heated and vacuum-formed onto the mold. Once cooled, the rigid thermoplastic maintains its curved shape, providing better stability than elastomers.
To address the stretching that occurs during molding—which alters substrate thickness and meta-atom spacing—the authors developed a Finite Element Method (FEM) thermorheological model. This model predicts viscoelastic deformation, allowing for the "pre-distortion" of the initial flat design. By intentionally offsetting meta-atoms in the flat layout, the thermoforming process pulls them into their precise intended positions on the final curved surface.
Results and Discussion
The fabrication process successfully achieved sub-millimeter radii of curvature ($R = 3.2$ mm) with wafer-scale alignment accuracy within $\pm 10$ $\mu$m. Experimental results validated the predictive model, demonstrating that deformation compensation is essential for maintaining optical fidelity.
A curved metalens (NA 0.14) achieved near-diffraction-limited performance with a Strehl ratio of 0.89, significantly outperforming non-compensated designs. Furthermore, the team demonstrated hybrid optics by thermoforming a metasurface onto a standard spherical glass lens, reducing its focal length from 3.4 mm to 1.8 mm while maintaining high contrast. As a system-level proof of concept, an artificial compound eye was created, capturing uniform, high-contrast images across a wide field of view and a large depth of field (2 cm to 10 cm).
Conclusion
While current alignment is limited to $\pm 10$ $\mu$m due to thermal contraction, future improvements in heating uniformity could further enhance precision. This scalable platform bridges the gap between high-throughput semiconductor manufacturing and complex 3D optical design, paving the way for advanced conformal photonics in wearable displays and bioinspired vision systems.
Summary updated