Abstract
In order to deduce the difficulty of fixing the Ritchey-Chretien (R-C) dual reflective optical system and enhance the stability of the secondary mirror, a compact integral structure is presented here composed of two transmitting and two reflective aspheric surfaces. The four surfaces were manufactured from a single germanium lens and integrated together. The two reflective surfaces formed by coating the inner reflecting films were assembled in one lens. It makes the installation of the two mirrors easier and the structure of the secondary mirror more stable. A design of mid-wave infrared (MWIR) compact imaging system is presented with a spectral range chosen as $3.7-4.8\mu m$. The effective focal length is f=90 mm. The field of view (FOV) for the lens is $4.88^{\circ}$. It has good imaging capability with Modulation Transfer Function (MTF) of all field of view more than 0.55 close to the diffraction limitation. Outdoor experiments were carried out and it is shown that the integral catadioptric optical system performs well on imaging.
Introduction
Traditional Ritchey-Chretien (R-C) optical systems are widely utilized in high-resolution imaging applications due to their compact form factor. However, these systems face significant engineering challenges, particularly regarding mechanical instability and alignment sensitivity. The secondary mirror in a standard R-C setup is typically supported by brackets (spiders), which introduce light obscuration and are prone to vibration or deformation under high acceleration. Furthermore, the microscopic alignment tolerances between the primary and secondary mirrors make assembly complex and sensitive to environmental stressors. This research proposes a "solid-state" alternative to mitigate these issues.
Design and Methodology
To address the limitations of traditional assemblies, this study introduces an integral catadioptric structure. Rather than using discrete mirrors separated by air, the system is fabricated from a single germanium lens. This approach incorporates four distinct aspheric surfaces: two transmitting surfaces and two reflective surfaces coated with specialized films to function as the primary and secondary mirrors.
The design process began with the mathematical optimization of Seidel coefficients to minimize spherical and coma aberrations. By "filling" the traditional air gap with germanium, the researchers utilized optical design software to refine the surfaces into high-order aspheres. Manufacturing was achieved through single-point diamond turning, ensuring 10nm-scale precision and effectively "baking" the optical alignment into the physical substrate.
A key innovation is the addition of a fourth convex emergent surface. This surface provides positive focal power, redistributing the optical load and significantly reducing residual aberrations that two mirrors alone could not resolve. Additionally, the design incorporates internal stray light shielding by blacking the circumference of the germanium block, creating a natural "light screen."
Results and Performance
The resulting system operates in the mid-wave infrared (MWIR) spectrum (3.7–4.8 µm) with an effective focal length of 90 mm and an F-number of 1.86. The system achieved a wide field of view (FOV) of 4.88° with negligible distortion (less than 0.5%).
Performance metrics indicate near-diffraction-limited imaging. As shown in the MTF analysis, the system maintains a modulus of the OTF above 0.55 across the entire FOV at the spatial frequency of interest. Furthermore, the design ensures 100% cold aperture efficiency by matching the exit pupil to the detector's cold shield, minimizing thermal noise. Outdoor experimental validation confirmed these results, producing high-contrast night imagery of targets at distances up to 2 km, including clear heat signatures of aircraft engines.
Conclusion
The integral catadioptric design offers a robust alternative to traditional R-C systems, providing superior mechanical stability and simplified alignment. While the use of germanium presents challenges related to cost and thermal sensitivity ($dn/dT$), the system's performance in demanding environments makes it a compelling solution for compact MWIR imaging in aerospace and defense applications. Future work will focus on exploring lighter infrared materials and active athermalization strategies.
Summary updated