Think of cornstarch mixed with water (Oobleck). Gently stir it, and it behaves like a liquid. Slap it, and it instantly turns rigid, acting like a solid. This macroscopic phenomenon is known as Discontinuous Shear Thickening (DST). For decades, understanding why a fluid's viscosity can jump abruptly by orders of magnitude under stress has been a central challenge in rheology.
The core insight of recent research is that DST is not a purely hydrodynamic effect. Instead, it is a structural transition driven by the microscopic interplay between lubrication and interparticle friction.
The Transition from Lubrication to Friction
At low shear rates, particles in a dense suspension are separated by a thin film of the suspending liquid. This film acts as a lubricant, preventing direct solid-to-solid contact. The forces between particles are purely hydrodynamic, allowing them to slide past one another with relative ease. However, as the applied shear stress increases, it overcomes the repulsive forces (such as electrostatic or steric forces) keeping the particles apart.
In a foundational model, M. E. Cates (Discontinuous Shear Thickening without Inertia in Dense Non-Brownian Suspensions) proposed that DST can be understood as a transition from this "lubricated" state to a "frictional" state. When the stress exceeds a critical threshold, the lubricating film breaks down, forcing particles into direct contact where static and dynamic friction take over. This transition drastically restricts the particles' ability to slide, causing the suspension to approach a "jammed" state at packing fractions much lower than those required for frictionless spheres.
To test the universality of this mechanism, Meera Ramaswamy et al. (Universal scaling of shear thickening transitions) developed a universal scaling theory. By collapsing viscosity data from various dense suspensions onto a single master curve, the authors demonstrated the existence of two distinct scaling regimes corresponding to frictionless and frictional jamming. This confirmed that the macroscopic jump in viscosity is fundamentally governed by the microscopic fraction of frictional contacts.
Confinement-Induced Non-Newtonian Lubrication
While the direct solid-friction model explains many aspects of DST, it assumes the suspending fluid remains a simple Newtonian lubricant until contact occurs. Recent work suggests a more nuanced picture: the fluid itself changes when squeezed into nanometer-scale gaps.
Adolfo Vázquez-Quesada et al. (Normal lubrication force between spherical particles immersed in a shear-thickening fluid) developed an analytical model showing that the localized viscosity within these narrow interparticle gaps changes dramatically under high stress. Instead of a simple breakdown of lubrication, the fluid within the gap undergoes its own localized rheological transition.
Expanding on this idea, Alan Rosales-Romero et al. (Effects of confinement-induced non-Newtonian lubrication forces on the rheology of a dense suspension) introduced the "Functionalised Bi-Viscous" (FBV) model. The authors demonstrated that even simple liquids can exhibit non-Newtonian behavior when extremely confined. This confinement-induced viscosity increase can generate macroscopic DST and negative normal stresses without requiring direct solid-to-solid particle friction. Thus, the transition to shear thickening can be driven either by particle-particle friction or by the extreme non-Newtonian physics of the confined fluid itself.
Hysteresis, Rheochaos, and Transient Dynamics
Because DST involves a transition between distinct physical states (lubricated vs. frictional), these fluids rarely exhibit simple, steady-state behavior. Instead, they are prone to instabilities and history-dependent effects.
One major signature of this complexity is hysteresis—where the stress required to start flow differs from the stress at which flow stops. Hugo Perrin et al. (Hysteresis in viscous suspensions) isolated this effect in fully overdamped systems, proving that interparticle friction, rather than fluid inertia, drives this memory effect via a velocity-weakening rheology.
When these frictional transitions interact with fluid inertia and spatial variations in particle packing, they trigger spatiotemporal instabilities known as "rheochaos." Peter Angerman et al. (Numerical simulations of spatiotemporal instabilities in discontinuous shear-thickening fluids) utilized advanced Smoothed Particle Hydrodynamics (SPH) simulations to capture these aperiodic oscillations and pattern formations.
The authors highlighted that because traditional models focus almost exclusively on steady-state conditions, they miss these critical transient dynamics. This gap is further emphasized by Marko Popović et al. (Thermally activated flow in models of amorphous solids), who noted that understanding the transient phase from rest to steady flow is essential for capturing macroscopic phenomena like stress overshoots and shear banding. To address this, Peter Angerman et al. (Microstructural Smoothed Particle Hydrodynamics Model and Simulations of Discontinuous Shear-Thickening Fluids) introduced new microstructural computational tools specifically designed to map these time-dependent, chaotic flows.
By shifting the focus from macroscopic fluid mechanics to the microscopic physics of the interparticle gap, researchers have demystified why dense suspensions thicken so abruptly. Whether driven by direct frictional contact or the non-Newtonian physics of highly confined lubricants, the sudden rigidity of these fluids is a collective, emergent consequence of microscopic constraints.
Key Foundational Work
Normal lubrication force between spherical particles immersed in a shear-thickening fluid (2018) — contributed 7 concept elements to this direction.
Discontinuous Shear Thickening without Inertia in Dense Non-Brownian Suspensions (2014) — contributed 2 concept elements to this direction.