When engineers model complex thermodynamic systems—ranging from internal combustion engines to cryogenic fuel tanks—they rely heavily on simplifying assumptions to make the underlying mathematics tractable. Two of the most ubiquitous shortcuts are the adiabatic wall assumption (the belief that a system's boundaries allow zero heat transfer with the environment) and the ideal gas approximation (the assumption that gas particles interact only through perfectly elastic collisions).
While these idealizations provide elegant closed-form equations and fast computational runtimes, they create a persistent "reality gap." In practice, heat always leaks, pressure drops across valves, and real fluids deviate from ideal behavior. Across a wide spectrum of engineering research, authors are uncovering how these foundational simplifications lead to significant engineering discrepancies, and why accounting for real-world dissipation is essential for precision modeling.
The Reality Gap of Adiabatic Boundaries
Why do we assume adiabaticity? It isolates the core thermal reactions from environmental noise, allowing engineers to calculate baseline efficiencies without simulating the entire surrounding environment. However, ignoring heat transfer to containment walls systematically skews efficiency and safety thresholds.
For instance, in combustion modeling, Chao Yang et al. demonstrated this limitation when simulating the ignition of methane-air mixtures at cryogenic temperatures in Ignition characteristics of methane-air mixture at low initial temperature. By assuming adiabatic walls, traditional models overlook the critical heat loss from the reacting gas to the storage vessel. In real-world liquefied natural gas (LNG) tanks, this environmental dissipation drains energy away from the spark, meaning the actual minimum energy and temperature required for successful ignition are higher than idealized models predict.
Similarly, in engine design, Zeyuan Liu showed in Thermodynamic modeling and simulation of working process of high efficiency two-stroke engine that assuming adiabatic processes in two-stroke engines completely masks the substantial heat transfer occurring between the working fluid and the cylinder walls or cooling systems. Neglecting these thermal losses results in overoptimistic predictions of thermal efficiency and inaccurate assessments of mechanical stress.
The same discrepancy appears in industrial heating. When modeling a spiral-finned helical heater for drilling fluids, Yi Zhang found a distinct temperature gap between theoretical simulations and experimental measurements in Study on the Flow Characteristics and Heating Performance of a Drilling Fluid Helical Heater. Because the simulation's adiabatic boundary conditions failed to account for environmental heat loss, the model consistently overestimated the final outlet temperature of the viscous fluid. Even when calculating catastrophic events like battery thermal runaway, Yao Yao et al. noted in Characteristic Differences of Thermal Runaway Triggered by Overheating and Overcharging in Lithium-Ion Batteries and Multi-Dimensional Safety Protection Strategies that assuming ideal adiabatic conditions compromises the precision of calculated heat release values, as real-world systems naturally dissipate energy during a failure chain.
Non-Ideal Fluids and Boundary Layer Simplifications
Beyond heat loss at the boundaries, thermodynamic models frequently oversimplify the fluid itself. The ideal gas law assumes zero intermolecular forces and negligible particle volume. While this holds true at low pressures and high temperatures, it fails when fluids are compressed, chilled, or subjected to extreme velocities.
When applied to large-scale infrastructure, this approximation introduces subtle but compounding errors. For example, Kaarthik Sundar et al. developed an economic optimal control framework for natural gas transport across pipeline networks in Optimal Control for Scheduling and Pricing Intra-day Natural Gas Transport on Pipeline Networks. While their baseline model utilized the ideal gas approximation for computational efficiency, they highlighted that such simplifications limit predictive accuracy when the gas experiences conditions that cause its behavior to deviate from ideal states.
This issue is magnified in cryogenic applications. Yu Bu et al. pointed out in Numerical Study on Thermodynamic Coupling Characteristics of Fluid Sloshing in a Liquid Hydrogen Tank for Heavy-Duty Trucks that treating vapor as an ideal gas when simulating fluid sloshing in liquid hydrogen tanks fails to fully capture the complex, highly coupled phase changes and thermodynamic behaviors occurring under dynamic driving conditions.
Fluid behavior is also oversimplified at the internal boundaries of mechanical components. In fluid ejectors—devices used widely in refrigeration—models often assume both adiabatic flow and perfectly uniform mixing boundary layers. As shown by Fenglei Li et al. in Performance Predictions of Dry and Wet Vapors Ejectors Over Entire Operational Range, and later extended to adjustable nozzles by Hongjie Chen et al. in A Thermodynamic Model for Performance Prediction of an Ejector with an Adjustable Nozzle Exit Position, ignoring localized kinetic energy variations and non-uniform mixing boundary layers creates a distinct performance prediction error between the mathematical model and the actual critical or subcritical operational modes of the ejector.
Compounding Errors from Neglected Parasitic Losses
A final facet of this research direction focuses on system-level simplifications, where researchers omit "minor" parasitic losses—such as pressure drops in valves, friction in pipes, or non-uniform spatial distributions—to keep simulations manageable.
In large-scale chemical process design, such as the production of ultra-high-purity phosphine for semiconductors, Jingang Wang et al. observed in Process Design and Optimisation Analysis for the Production of Ultra-High-Purity Phosphine that omitting equipment heat dissipation, product transportation, and pressure losses across pumps and valves distorts the true energy consumption profile of competing chemical routes. A similar challenge arises in waste heat recovery systems. Shunsen Wang noted in Thermodynamic Analysis and Optimization of a Novel Power-Water Cogeneration System for Waste Heat Recovery of Gas Turbine that while assuming steady-state operation and treating pipe pressure drops as a fixed percentage simplifies the optimization of a supercritical $\text{CO}_2$ Brayton cycle, it inherently limits the model's ability to capture transient real-world performance.
When these spatial and mechanical details are ignored, the model underpredicts localized stress points. Mengmeng Ai et al. demonstrated in Research on Thermal Characteristics of Internal Ventilated Paths in Compact Medium High- Voltage Motor Based Fluid Network Decoupling that theoretical thermal models for high-voltage motors frequently underestimate actual temperature rises because they treat insulation layers as perfectly uniform and ignore axial fluid velocities.
| Paper | Idealized Assumption Made | Real-World Consequence of Assumption |
|---|---|---|
| Yang et al. (2023) | Adiabatic containment walls | Underestimates minimum ignition energy and temperature |
| Liu (2024) | Adiabatic combustion cycle | Overestimates thermal efficiency; miscalculates mechanical stress |
| Zhang (2025) | Adiabatic boundary conditions | Overestimates fluid outlet temperature in heat exchangers |
| Sundar et al. (2019) | Ideal gas approximation | Limits model accuracy under non-ideal pipeline pressures |
| Wang et al. (2025) | Zero equipment heat/pressure loss | Distorts true energy consumption and cost profiles |
Building Intuition
Why do these models fail, and how do we fix them? The core intuition is that thermodynamic systems are fundamentally open, dynamic, and non-uniform. An adiabatic wall or an ideal gas is a mathematical fiction that strips away the spatial gradients and environmental couplings that govern real physics.
When you assume an adiabatic wall, you are assuming the boundary has an infinite thermal resistance. In reality, heat moves along the path of least resistance. When you assume an ideal gas, you assume molecules never feel each other's presence until they collide. In reality, intermolecular forces dictate phase changes and pressure drops.
Moving forward, the trend across engineering disciplines is not to abandon these classical models entirely, but to systematically replace them with decoupled fluid networks, non-ideal equations of state, and empirical dissipation factors. By anchoring simulations in real-world boundaries, engineers can close the reality gap and design highly efficient, predictable systems.
Key Foundational Work
A Novel Pumped Hydro Combined with Compressed Air Energy Storage System (2013) — contributed 1 concept elements to this direction.
Performance Predictions of Dry and Wet Vapors Ejectors Over Entire Operational Range (2017) — contributed 1 concept elements to this direction.