A Thermodynamic Model for Performance Prediction of an Ejector with an Adjustable Nozzle Exit Position

Hongjie Chen, Bingxu Chen, Zhizhou Xu, Jing Ge, Honghua Chen, Z.w. ZhongProcesses 2025 · DOI

TL;DR

This paper introduces a thermodynamic model to predict the performance of ejectors with adjustable nozzle exit positions (NXP), crucial for improving efficiency under varying operating conditions. The model allows for the analysis of factors influencing the optimal NXP and proposes a strategy for automatic adjustment, achieving prediction errors within acceptable engineering limits.

What Problem Does This Paper Address?

Ejectors are simple, cost-effective devices used to boost the pressure of low-pressure vapor by using a high-pressure vapor. They are vital in applications like refrigeration and distillation. However, their efficiency significantly drops under "off-design" conditions (when operating parameters deviate from their intended design point). A key factor influencing ejector performance is the nozzle exit position (NXP). While previous research has focused on finding the optimal NXP for fixed conditions, there's a significant need for real-time adjustment strategies to maintain high efficiency across a range of operating parameters. This paper tackles this challenge by developing a model that can predict performance and guide the automatic adjustment of the NXP for variable conditions.

Methods

The core of this research is a thermodynamic model developed to predict the performance of an ejector with an adjustable NXP. This model is based on fundamental principles of mass, momentum, and energy conservation. It accounts for different flow regimes and the interaction between primary and secondary fluids within the ejector. A key aspect is the consideration of the "transition point" where the mixing layer between the two streams reaches the centerline. The model differentiates between cases where this transition point occurs inside or before the mixing chamber.

To make the model practical for automatic control, the authors derived correlation equations. They analyzed the key factors influencing the dimensionless optimal nozzle exit position (DONXP) and fitted these relationships as functions of the area ratio and expansion ratio for various refrigerants (R245fa, R134a, R600a, and R141b). This fitting process was segmented based on the location of the transition point to capture different flow behaviors. Finally, they proposed a strategy for automatic NXP adjustment using a stepping motor, outlining a control program flow.

Datasets

The paper validates its proposed thermodynamic model by comparing its predictions against experimental data from existing literature. Specific references are cited for experimental results on entrainment ratios, critical back pressures, and optimal nozzle exit positions for various refrigerants and ejector configurations. No new datasets were generated or introduced in this study.

Key Insights and Ideas

  • NXP is King for Off-Design Performance: The study strongly reinforces that adjusting the NXP is a powerful lever for maintaining ejector efficiency when operating conditions change, transforming potentially low-efficiency scenarios into high-efficiency ones.
  • Transition Point Matters: The location of the jet mixing layer's transition point (inside or before the mixing chamber) significantly impacts how the optimal NXP changes with the area ratio. This distinction is crucial for accurate modeling and control.
  • Universal Trends Emerge: Despite using different refrigerants, the fundamental trends of DONXP variation with area ratio and expansion ratio are remarkably similar, suggesting that the derived correlations can have broad applicability.
  • Simplicity for Control: The authors prioritized developing relatively simple functional relationships for DONXP, recognizing the practical constraints of implementing complex control algorithms in hardware like programmable logic controllers.

Key Results

The developed thermodynamic model demonstrates good predictive capability, with maximum errors for:

  • Entrainment ratio: ±10.70%
  • Critical back pressure: ±7%
  • Nozzle exit position: ±15.85%

The study found that:

  • For a fixed expansion ratio, the DONXP increases with the area ratio.
  • When the transition point is inside the mixing chamber, the DONXP increases with the area ratio at rates of 0.068~0.195.
  • When the transition point is before the mixing chamber, these rates are much lower, 0.0009~0.0034.
  • For a fixed area ratio, a larger expansion ratio leads to a smaller DONXP.
  • Correlation equations were developed to fit the DONXP as a function of expansion ratio and area ratio for different refrigerants, achieving high fitting accuracy (R² = 0.999).
  • A control strategy for automatic NXP adjustment was proposed, outlining the steps to calculate the required real-time NXP and motor control signals.

Limitations and Future Work

The authors acknowledge that the model's assumptions, such as adiabatic flow and uniform mixing boundary layers, deviate from real-world conditions, contributing to the observed errors. While the model meets engineering requirements, further refinement could improve accuracy.

Future work could involve:

  • Experimental validation of the proposed automatic adjustment strategy.
  • Investigating the impact of other factors not explicitly covered, such as different working fluids or more complex ejector geometries.
  • Exploring more advanced control algorithms for even finer real-time NXP adjustments.

Summary updated

Abstract

Improving the efficiency of ejectors during off-design operations can be effectively achieved through the automatic adjustment of the nozzle exit position (NXP). A thermodynamic model for predicting the performance of an ejector with an adjustable nozzle position is proposed and validated. The key factors influencing the optimal nozzle exit position under variable operating conditions are analyzed using the model. The dimensionless optimal nozzle exit position (DONXP) of the ejector is fitted as a function of these key factors, and a nozzle exit position adjustment scheme for variable operating conditions is further derived. The proposed model has maximum errors in the entrainment ratio, critical back pressure, and nozzle exit position within ±10.70%, ±7%, and ±15.85%, respectively. When the area ratio increases, with the transition point located in the mixing chamber, the increase rates of the DONXP are within 0.068~0.195 for the R245fa, R600a, R141b, and R134a ejectors. However, when the transition point is located before the entrance of the mixing chamber, the increase rates are within 0.0009~0.0034. When the area ratio is fixed, the larger the expansion ratio, the smaller the DONXP. The DONXP can be fitted according to different cases where the turning point is located either before or after the entrance of the mixing chamber, to meet the demand for automatic adjustment of the nozzle exit position.
BibTeX
@inproceedings{chen2025thermodynamic,
  author = {Hongjie Chen and Bingxu Chen and Zhizhou Xu and Jing Ge and Honghua Chen and Z.W. Zhong},
  title = {{A Thermodynamic Model for Performance Prediction of an Ejector with an Adjustable Nozzle Exit Position}},
  booktitle = {Processes},
  year = {2025},
  doi = {10.3390/pr13030879},
}
Figure