Simultaneously Transmitting and Reflecting Surfaces

226 concepts125 papers2 proposals

Conventional Reconfigurable Intelligent Surfaces (RIS) operate like programmable mirrors. As noted by Mengnan Jian, traditional designs rely on an opaque substrate that reflects incident electromagnetic waves within a 180-degree half-space. While this allows a network to steer signals around obstacles to a user in front of the surface, it creates an absolute blind zone directly behind it. If a surface is mounted on an exterior window, it can either serve users outside or users inside—but not both simultaneously.

To overcome this hemispherical limitation, researchers have transitioned from a "smart mirror" paradigm to a "smart window and mirror" hybrid. Known as Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surfaces (STAR-RIS or STARS), these architectures utilize re-engineered surface elements that can both reflect and transmit (refract) incident signals. As explained by Jiaqi Xu et al., this capability unlocks full 360-degree, omnidirectional signal control, effectively doubling the utility of deployed hardware by bridging distinct environments like indoor and outdoor spaces (Zhaolin Wang et al.).

Mechanisms of Energy Partitioning

The fundamental challenge of a STAR surface is deciding how to divide the incoming electromagnetic energy between the front and back half-spaces. The literature establishes three primary operating protocols to manage this resource allocation:

  Incident Wave
       │
       ▼
┌───────────────┐
│   STAR-RIS    │
└───────┬───────┘
        │
        ├─► Reflection Half-Space (180°) [Phase shift θ_r, Amplitude β_r]
        │
        └─► Transmission Half-Space (180°) [Phase shift θ_t, Amplitude β_t]
  1. Energy Splitting (ES): In this mode, every individual element on the surface simultaneously splits the power of the incident wave into a reflected component and a transmitted component. Jiakuo Zuo et al. demonstrate that this approach provides the maximum possible degrees of freedom for beamforming, as the amplitude and phase of both components can be adjusted dynamically. Bin Li notes that ES protocols consistently outperform time-blocked alternatives in multi-user environments because they eliminate the need to split transmission time, allowing parallel communication paths to run concurrently.
  2. Mode Switching (MS): Instead of splitting energy at the single-element level, the surface is mathematically or physically partitioned into clusters. Certain elements are dedicated entirely to full reflection, while others are dedicated to full transmission. As analyzed by Chao Zhang et al., while MS simplifies the hardware control overhead, it reduces the effective diversity gain available to any single user since fewer physical elements contribute to their specific signal path.
  3. Time Switching (TS): In a TS protocol, the entire surface alternates between 100% reflection and 100% transmission across different time slots. While easy to implement, it introduces a time-division multiplexing penalty that reduces overall spectral efficiency compared to continuous energy splitting.

The Reality of Coupled Phase Shifts

In early, idealized mathematical models of STAR surfaces, researchers assumed that the phase shift applied to the reflected wave ($\theta_{ref}$) and the transmitted wave ($\theta_{trans}$) could be configured completely independently. However, physical hardware constraints break this assumption.

A passive metasurface element alters an incoming wave by adjusting its internal surface impedance. Because the exact same physical atom or micro-strip structure interacts with the wave to perform both reflection and transmission, changing the element's configuration to alter $\theta_{ref}$ inevitably warps $\theta_{trans}$.

To address this, Xidong Mu et al. introduced a realistic coupled phase-shift model. They demonstrated that the transmission and reflection phase shifts are mathematically bound to one another based on the conservation of energy. Ignoring this coupling leads to overly optimistic performance projections. Zheng Zhang et al. showed that when these phase shifts are coupled, optimization algorithms must jointly balance the phase and amplitude coefficients across both sides of the surface to maintain user fairness and prevent severe signal degradation in one of the half-spaces.

Expanding Network Topology

By controlling the full 360-degree space, STAR surfaces fundamentally alter how higher-layer wireless protocols are designed.

Artificial Channel Engineering in NOMA

Non-Orthogonal Multiple Access (NOMA) relies on distinct differences in users' channel strengths to successfully decode multiplexed signals in the power domain. In conventional networks, these channel conditions are dictated by geography. With STAR surfaces, operators can artificially engineer these channel differences. Chenyu Wu et al. and Jiakuo Zuo et al. demonstrated that by pairing a transmission-space user with a reflection-space user, the passive beamforming coefficients can be optimized to maximize the capacity gap between them, significantly boosting the sum-rate and decoding efficiency of NOMA systems.

Spatial Isolation in ISAC

In Integrated Sensing and Communications (ISAC) systems, a single base station tries to track targets (radar) and transmit data (communication) using the same frequency band. This often creates severe radar clutter that blinds the communication receivers. Zhaolin Wang et al. showed that a STAR surface can physically isolate these tasks by partitioning the environment into distinct zones. For example, the surface can be configured to reflect sensing beams to track a moving vehicle in the front half-space, while simultaneously transmitting data beams to indoor users located in the back half-space, eliminating mutual interference.

The 360-Degree Security Risk

Omnidirectional coverage is a double-edged sword. In traditional reflection-only systems, a signal is physically contained within the front hemisphere. However, because a STAR surface allows signals to pass through physical barriers, legitimate transmissions can easily leak to the opposite side of the hardware.

Zheng Zhang et al. identified this bidirectional propagation as a critical security vulnerability, noting that it creates a 360-degree eavesdropping risk. To secure these networks, physical-layer security designs must be more sophisticated. As shown by Jingjing Zhao et al., security is achieved by exploiting the extra degrees of freedom offered by energy splitting to project destructive interference nulls precisely at eavesdropper locations anywhere in the full-space radius, while constructively focusing the remaining energy onto the legitimate users.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 134 papers
  2. Version 1 · 2026-10-04 · 143 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_simultaneous_transmission_and_reflection_dd42133a,
  title = {simultaneous transmission and reflection},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneous-transmission-and-reflection/rdr_dd42133af73d49e5b47ce2fe5186c9b7},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}

This exact version (version 2, frozen text):

@misc{lacuna_simultaneous_transmission_and_reflection_dd42133a_v2,
  title = {simultaneous transmission and reflection},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/simultaneous-transmission-and-reflection/rdr_dd42133af73d49e5b47ce2fe5186c9b7/v/2},
  note = {Version 2, frozen 2026-10-04. Accessed 2026-11-20},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake