Distributed Reconfigurable Intelligent Surfaces for Spatial Diversity

15 concepts10 papers1 proposal

In the effort to engineer smart radio environments, Reconfigurable Intelligent Surfaces (RIS) have emerged as a pivotal technology. Traditionally, research focused on a single, large centralized surface to beamform signals toward users. However, a growing body of evidence suggests that distributing the same number of reflecting elements across multiple smaller surfaces—a strategy known as distributed RIS (D-IRS)—provides fundamental advantages in coverage, reliability, and network capacity.

Breaking the Rank-One Bottleneck

A significant limitation of a single centralized RIS is the "rank-one" bottleneck. In multi-user or multi-stream scenarios, a single surface often creates highly correlated channels, effectively limiting the transmission to a single spatial stream. Cao et al. argue that deploying multiple spatially separated surfaces creates independent signal paths between the base station and users. This architecture increases the rank of the effective channel matrix, enabling higher spatial multiplexing gains that are physically impossible with a centralized array.

This expansion of the "Degrees of Freedom" (DoF) is particularly critical for high-speed data transmission. For instance, Dong et al. demonstrate that splitting a large-scale active array into multiple smaller units can break the DoF bottleneck in directional modulation networks, facilitating multi-stream transmissions that significantly outperform traditional setups.

Robustness Through Path Diversity

Wireless signals, especially at millimeter-wave (mmWave) frequencies, are highly susceptible to blockages. A single RIS acts as a single point of failure; if the line-of-sight (LoS) to that surface is obstructed, the link fails. Gao et al. show that distributing reflecting elements improves system performance by increasing the likelihood of maintaining at least one LoS path. This spatial diversity ensures that if one path is blocked by a physical obstacle, other units can still provide a reliable connection.

Furthermore, Gao et al. find that increasing the number of distributed units is more effective at mitigating signal attenuation over long distances than simply increasing the element density of a single unit. By spreading these "mirrors" throughout a service area, the network can reach localized blind spots more effectively, providing better coverage for cell-edge users Cao et al..

Enhanced Interference Suppression and Security

Distributed architectures offer finer control over the spatial distribution of electromagnetic energy. In multi-user environments, this allows for more precise spatial nulling to suppress inter-user interference. Chou et al. leverage deep reinforcement learning to manage these distributed surfaces, demonstrating superior interference suppression even under practical hardware constraints like discrete phase shifts.

This precision also extends to physical layer security. By coordinating multiple surfaces, the system can steer signals toward legitimate users while simultaneously creating "destructive" interference at potential eavesdropping locations. Zhang et al. demonstrate that this architectural strategy balances array gain with distance diversity, significantly boosting the minimum secrecy rate in NOMA networks. Similarly, Xiu et al. show that coordinating the on-off status and phase shifts of multiple surfaces provides the necessary degrees of freedom to maximize secure data transmission in mmWave systems.

Cooperative and Aerial Deployments

The benefits of distribution are further amplified when the surfaces cooperate or move. Ma et al. propose a cooperative beamforming framework where signals can undergo multi-hop reflections across several surfaces. This approach leverages multi-hop gains to steer signals around dense blockages that a single reflection could not bypass.

To overcome the limitations of fixed ground-based infrastructure, researchers are also exploring Aerial Reconfigurable Intelligent Surfaces (ARIS). By mounting RIS modules on UAVs, the network can dynamically reposition its reflective elements to optimize the channel in real-time. Aung et al. show that coordinating multiple aerial surfaces provides superior energy efficiency and coverage compared to both single-surface configurations and traditional UAV-relay systems, particularly in complex environments where users are highly mobile.

Key Foundational Work

Sum-Rate Maximization for Multi-Reconfigurable Intelligent Surface-Assisted Device-to-Device Communications (2021) — contributed 2 concept elements to this direction.
Distributed IRS with Statistical Passive Beamforming for MISO Communications (2020) — contributed 2 concept elements to this direction.
Intelligent Reflecting Surface Aided Multi-User mmWave Communications for Coverage Enhancement (2020) — contributed 2 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_distributed_spatial_diversity_f836fba5,
  title = {distributed spatial diversity},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/distributed-spatial-diversity/rdr_f836fba559434c86b65b7a220d4df83d},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_distributed_spatial_diversity_f836fba5_v1,
  title = {distributed spatial diversity},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/distributed-spatial-diversity/rdr_f836fba559434c86b65b7a220d4df83d/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake