In wireless communications, passive Reconfigurable Intelligent Surfaces (RIS) act like smart mirrors, altering the phase of incoming electromagnetic waves to bypass obstacles and eliminate coverage dead zones. However, as Ertugrul Basar et al. point out in Present and Future of Reconfigurable Intelligent Surface-Empowered Communications [Perspectives], passive surfaces suffer from a fundamental physical bottleneck: multiplicative fading (or double path loss).
Because a passive surface merely redirects energy without adding any, the total path loss of the cascaded channel is the product of the transmitter-to-surface path loss and the surface-to-receiver path loss. Mathematically, this compounding attenuation means that signal strength drops off catastrophically over distance. As a result, Zijian Zhang et al. demonstrate in Active RIS vs. Passive RIS: Which Will Prevail in 6G? that passive surfaces offer negligible capacity gains unless they are built with an impractically large number of elements. In fact, Xibi Chen argues in Active RISs: Signal Modeling, Asymptotic Analysis, and Beamforming Design that a passive surface might require millions of elements to match the performance of a well-optimized alternative.
Turning Multiplication into Addition
To break this bottleneck, researchers are shifting from passive reflection to Active Reconfigurable Intelligent Surfaces (Active RIS). Instead of relying on purely passive elements, an active RIS integrates low-power amplifiers directly into each reflecting unit, as detailed by Qingqing Wu et al. in Intelligent Surfaces Empowered Wireless Network: Recent Advances and The Road to 6G.
This architectural shift fundamentally alters the path loss equation. By injecting energy at the exact point of reflection, the active surface converts the multiplicative path loss into an additive loss structure. The signal is boosted right when it is most vulnerable, effectively transforming a passive mirror into an active relaying component. The practical impact is substantial: Rongguang Song et al. developed a prototype in Design and Prototyping of Filtering Active STAR-RIS With Adjustable Power Splitting that achieves up to 12 dB of active gain, demonstrating how a few hundred active elements can overcome deep fading scenarios where passive surfaces fail.
The Catch: Managing the Amplification Noise Floor
However, active amplification introduces a critical engineering trade-off: the amplification noise floor. Amplifiers do not just boost the desired signal; they also introduce thermal noise.
When an active RIS element captures and amplifies an incoming wave, it simultaneously amplifies its own internal hardware noise and transmits it toward the receiver. As Hong Ren et al. emphasize in Transmission Design for Active RIS-Aided Simultaneous Wireless Information and Power Transfer, this creates a delicate balance between signal enhancement and noise floor elevation. If the amplification gain is unmanaged, the added noise floor can degrade the overall signal-to-interference-plus-noise ratio (SINR).
Therefore, optimal deployment requires careful power allocation between the base station transmitter and the active surface elements, a challenge that complicates traditional discrete phase-shift optimization frameworks as noted by Wenhai Lai et al. in An Efficient Convex-Hull Relaxation Based Algorithm for Multi-User Discrete Passive Beamforming.
Expanding the Spatial Dimension
Beyond simple reflection, active amplification unlocks new multi-functional network topologies. For instance, Simultaneously Transmitting and Reflecting Surfaces (STAR-RIS) split incoming signals to achieve full 360° coverage. While passive splitting inherently weakens the signal, Xidong Mu explains in Simultaneously Transmitting and Reflecting Surfaces (STARS) for Multi-Functional 6G that integrating power amplifiers allows the surface to actively compensate for these splitting losses.
This capability is especially vital in complex deployments, such as mounting active surfaces on Unmanned Aerial Vehicles (UAVs) to bypass blockages (Rongen Dong et al. in Multi-stream Transmission for Directional Modulation Network via Distributed Multi-UAV-aided Multi-active-IRS), or deploying them in Non-Orthogonal Multiple Access (NOMA) networks to mitigate hardware impairments (Xinwei Yue et al. in Exploiting Active RIS in NOMA Networks With Hardware Impairments). By transforming the wireless channel from a passive obstacle into an active, programmable asset, active signal amplification provides the necessary degrees of freedom to sustain next-generation wireless networks.
Key Foundational Work
Active RIS vs. Passive RIS: Which Will Prevail in 6G? (2021) — contributed 2 concept elements to this direction.
Present and Future of Reconfigurable Intelligent Surface-Empowered Communications [Perspectives] (2021) — contributed 2 concept elements to this direction.
Beyond Max-SNR: Joint Encoding for Reconfigurable Intelligent Surfaces (2020) — contributed 1 concept elements to this direction.