Overcoming Multiplicative Fading with Active Intelligent Surfaces

You are reading version 1 of this direction, frozen 2026-10-04. The latest version is version 2.

Version 1 of 261 papers106 conceptsfrozen 2026-10-04

The vision for 6G wireless networks involves transforming the environment from a passive obstacle into a programmable asset. Reconfigurable Intelligent Surfaces (RIS) are the primary tool for this transformation, using arrays of metamaterial elements to steer electromagnetic waves toward users. However, a fundamental physical bottleneck has emerged: multiplicative fading.

In a traditional passive RIS setup, the signal travels from the transmitter to the surface and then to the receiver. The total path loss is not the sum of the distances, but the product of the path losses of the two individual hops. This "double fading" effect means that unless the RIS is placed extremely close to either the transmitter or the receiver, the reflected signal becomes too weak to be useful. Researchers are now pivoting toward Active RIS—surfaces that don't just bounce signals, but boost them.

The Multiplicative Fading Bottleneck

To understand why passive surfaces struggle, consider the link budget. As Zijian Zhang and Linglong Dai explain in Active RIS vs. Passive RIS: Which Will Prevail in 6G?, passive RIS elements only shift the phase of incident waves. They cannot add energy. Consequently, the signal power at the receiver decays at a rate proportional to $(d_1 d_2)^{-2}$, where $d_1$ and $d_2$ are the distances of the two hops.

This scaling is devastating for long-range communication. Xibi Chen demonstrates in Active RISs: Signal Modeling, Asymptotic Analysis, and Beamforming Design that in environments with a strong direct line-of-sight, a passive RIS provides almost negligible gains. To achieve the same performance as a small active surface, a passive surface would require millions of elements, which is physically and economically impractical.

How Active RIS Changes the Math

Active RIS architectures integrate low-power amplifiers (such as current-inverting converters or reflection-type amplifiers) directly into the unit cells of the surface. This architectural shift, described by Ertugrul Basar in Present and Future of Reconfigurable Intelligent Surface-Empowered Communications, effectively transforms multiplicative path loss into something closer to additive loss.

By amplifying the signal at the point of reflection, the surface "resets" the path loss for the second hop. This allows the reflected link to remain competitive with the direct path even over significant distances. Hardware prototypes, such as the one developed by Rongguang Song and Haifan Yin in Design and Prototyping of Filtering Active STAR-RIS with Adjustable Power Splitting, have shown that this gain is vital for providing 360-degree coverage in complex indoor and outdoor environments.

Solving the Four-Hop Problem in Sensing

The benefits of active amplification are most pronounced in Integrated Sensing and Communication (ISAC). In radar sensing, a signal must travel from the base station to the target and back again. When an RIS is used to facilitate this, the signal undergoes a "four-hop" propagation path.

Zhiyuan Yu 0007 and Cunhua Pan argue in Active RIS Aided Integrated Sensing and Communication Systems that passive surfaces are almost entirely ineffective for radar because the signal power decays by the product of four distances. Active RIS compensates for this by amplifying the signal during both the forward path to the target and the return echo path, significantly improving sensing accuracy and the Cramer-Rao Bound for target localization.

Beyond Reflection: STAR-RIS and Multi-Functional Surfaces

The research direction is moving toward surfaces that do more than just reflect. Simultaneously Transmitting and Reflecting (STAR)-RIS allows a surface to serve users on both sides of the panel. Jiaqi Xu and Yuanwei Liu provide a foundational model for this in Active Simultaneously Transmitting and Reflecting (STAR)-RISs: Modelling and Analysis, showing that active amplification is necessary to make the "transmission" (refraction) mode viable through structural barriers like walls.

Furthermore, Wanli Ni and Dusit Niyato explore Multi-Functional RIS (MF-RIS), which can dynamically switch between reflection, refraction, and amplification. This flexibility is crucial for applications like:

  • Satellite Positioning: Yu Zhang demonstrates using active surfaces to amplify weak GNSS signals for indoor positioning in ASTARS empowered Satellite Positioning Approach.
  • Federated Learning: Deyou Zhang and Ming Xiao show that active RIS can reduce aggregation errors in Over-the-Air Computation (AirComp) by boosting signals from distant edge nodes.

The Cost of Power: The Noise Trade-off

The primary challenge of Active RIS is that amplifiers do not just boost signals; they also introduce thermal noise. As Xinwei Yue notes in Secure Communication of Active RIS Assisted NOMA Networks, there is a critical trade-off between the amplification gain and the noise floor. If the amplification is too high without proper beamforming, the surface can even suffer from self-interference.

Despite this, the consensus across recent literature—including work by Qingqing Wu and Beixiong Zheng—is that the signal-to-noise ratio (SNR) gains from active components far outweigh the hardware-induced noise. This makes Active RIS a necessary evolution for 6G, moving the field from "smart mirrors" that merely redirect light to "distributed amplifiers" that actively shape the energy of the wireless environment.

Papers in this version

Showing 60 of 61 papers.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 41 papers
  2. Version 1 · 2026-10-04 · 61 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_active_signal_amplification_11fe5e9f,
  title = {active signal amplification},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/active-signal-amplification/rdr_11fe5e9f715a4028bc6bbf60b4eeb299},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_overcoming_multiplicative_fading_with_ac_11fe5e9f_v1,
  title = {Overcoming Multiplicative Fading with Active Intelligent Surfaces},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/overcoming-multiplicative-fading-with-active-intelligent-surfaces/rdr_11fe5e9f715a4028bc6bbf60b4eeb299/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}