Reconfigurable Intelligent Surface (RIS)-aided Vehicular Networks: Their Protocols, Resource Allocation, and Performance

Yuanbin Chen, Ying Wang, Jiayi Zhang, Ping Zhang, Lajos HanzoIEEE Veh. Technol. Mag 2022

Abstract

Reconfigurable intelligent surfaces (RISs) assist in paving the way for the evolution of conventional vehicular networks to autonomous driving. Having said that, the 3rd Generation Partnership Project (3GPP) faces numerous open challenges concerning the RIS-aided vehicle-to-everything (V2X) solutions of the near future. To tackle these challenges and to stimulate future research, this article focuses on the prospective transmission design of RIS-aided V2X communications. In particular, two V2X sidelink modes are enhanced by exploiting RISs and their variants, followed by a customized transmission frame structure that partitions the transmission efforts into different phases. Next, effective channel tracking and resource allocation techniques are developed for attaining a high beamforming gain at low overhead and complexity. Finally, promising research topics are highlighted and future 3GPP standardization items are proposed for RIS-aided V2X systems.

Introduction

Vehicular-to-Everything (V2X) communication is critical for the realization of autonomous driving, necessitating ultra-reliable and low-latency links. While Reconfigurable Intelligent Surfaces (RIS) offer a promising solution to extend coverage and boost efficiency by acting as "smart mirrors" for radio waves, their integration into vehicular environments faces significant hurdles. Specifically, the "double fading" effect—where signals reflected by a passive RIS suffer path loss twice—often renders the reflected link weaker than the direct path. Furthermore, high-speed mobility leads to rapid channel aging, making channel state information (CSI) obsolete quickly. Finally, the massive signaling overhead required to estimate channels for numerous RIS elements can severely reduce data transmission efficiency.

Methods

To address these challenges, a multi-layered architectural framework is proposed, focusing on hardware enhancements and protocol optimization.

The framework introduces two distinct modes:

  1. Mode 1 (Active Transmission): Employs "Active RIS" elements equipped with power amplifiers to actively combat double fading, particularly beneficial when direct links are strong.
  2. Mode 2 (Passive Reflection): Utilizes large-scale passive RIS mounted on infrastructure. To manage complexity, a "tile-based" design is used, where groups of elements are controlled collectively.

Customized Frame Structure and Channel Tracking

A novel radio frame structure is designed to minimize signaling overhead. High-dimensional channel estimation is performed only in the initial slot (Slot 0), while subsequent slots track low-dimensional changes, such as Doppler shifts. This process is divided into three distinct phases: Estimation, Resource Allocation/Coefficient Configuration, and Data Transmission.

Proposed frame structure for RIS-aided V2X sidelink communications.

The framework also incorporates Dynamic Twin-Structured (DTS) Sparsity, a three-layer approach for channel tracking. By exploiting the physical symmetry of the twin-hop link (BS-RIS and RIS-UE) and utilizing message-passing algorithms, the system can predict current channel states based on historical data, effectively mitigating the impact of high mobility.

Robust Resource Allocation

A resource allocation scheme is developed using statistical CSI (S-CSI) rather than instantaneous measurements. This approach ensures the system remains resilient to channel aging at high speeds (e.g., 130 km/h), maintaining link stability where traditional methods fail.

Key Results

The proposed framework was validated using the 28 GHz Millimeter Wave Statistical Spatial Channel Model and 3GPP TR 36.885 standards.

Overhead and Power Efficiency

The customized frame structure significantly improves efficiency. As shown in the performance analysis, the proposed scheme achieves a 61.76% reduction in signaling overhead for a system with 80 RIS elements compared to traditional benchmark schemes. Additionally, it demonstrates superior total transmit power efficiency across various sub-channel configurations.

Performance comparison showing transmit power and overhead reduction.

Mobility and Model Accuracy

Simulations indicate that the "Robust S-CSI" scheme maintains stable capacity even at vehicle speeds of 130 km/h, whereas non-robust benchmarks experience significant performance degradation due to channel aging. Furthermore, the DTS framework's simulated angular spreads and spatial lobes closely match empirical 28 GHz mmWave data, confirming the model's physical accuracy.

Conclusion and Future Directions

This research provides a comprehensive roadmap for integrating RIS into 5G/6G vehicular networks. While the proposed methods effectively address double fading and signaling overhead, challenges such as hardware complexity and algorithm tractability remain. Future work will focus on AI-enabled RIS for real-time optimization and the standardization of these technologies within 3GPP Release 18 and beyond.

Summary updated

Abstract

Reconfigurable intelligent surfaces (RISs) assist in paving the way for the evolution of conventional vehicular networks to autonomous driving. Having said that, the 3rd Generation Partnership Project (3GPP) faces numerous open challenges concerning the RIS-aided vehicle-to-everything (V2X) solutions of the near future. To tackle these challenges and to stimulate future research, this article focuses on the prospective transmission design of RIS-aided V2X communications. In particular, two V2X sidelink modes are enhanced by exploiting RISs and their variants, followed by a customized transmission frame structure that partitions the transmission efforts into different phases. Next, effective channel tracking and resource allocation techniques are developed for attaining a high beamforming gain at low overhead and complexity. Finally, promising research topics are highlighted and future 3GPP standardization items are proposed for RISaided V2X systems.
BibTeX
@article{chen2022reconfigurable,
  author = {Yuanbin Chen and Ying Wang and Jiayi Zhang and Ping Zhang and Lajos Hanzo},
  title = {{Reconfigurable Intelligent Surface (RIS)-aided Vehicular Networks: Their Protocols, Resource Allocation, and Performance}},
  journal = {IEEE Veh. Technol. Mag.},
  year = {2022},
}
Figure