Multiplicative Fading in Reconfigurable Intelligent Surfaces

162 concepts127 papers3 proposals

Reconfigurable Intelligent Surfaces (RIS) are often envisioned as a cornerstone of 6G, promising to transform wireless environments into programmable assets. However, a fundamental physical constraint known as the double-fading effect (or multiplicative path loss) threatens to relegate passive surfaces to a niche role. Unlike traditional direct-link communications where signal power decays relative to the distance, a reflected signal experiences attenuation twice: once on the path from the transmitter to the surface, and again from the surface to the receiver.

The Geometry of Multiplicative Loss

In a standard wireless link, the path loss is a function of the distance between the source and the destination. In contrast, as noted by Chao Zhang et al., long-distance outdoor communications involving reflecting surfaces must be modeled using a product-of-distances path loss.

If $d_1$ is the distance from the base station to the RIS and $d_2$ is the distance from the RIS to the user, the total path loss is proportional to $d_1^2 \times d_2^2$, rather than $(d_1 + d_2)^2$. This multiplicative relationship results in exponential signal degradation. As Zhiguo Ding explains, this compounded attenuation often makes reflected signals significantly weaker than those from conventional active relaying systems, especially at lower transmission powers.

This effect creates a "keyhole" in the communication link. Liang Yang et al. describe this as a constraint where the signal is forced through a single degree of freedom, preventing the system from achieving the high multiplexing gains typically seen in multi-antenna configurations.

The Scaling Problem for Passive Surfaces

To overcome this double path loss, passive surfaces must rely on sheer scale. By using a very large number of reflecting elements ($N$), a surface can provide enough passive beamforming gain to compensate for the attenuation. However, Qurrat-Ul-Ain Nadeem et al. point out that this necessitates a massive number of elements to achieve a signal-to-noise ratio (SNR) comparable to traditional active systems.

The practical implications are severe:

  • Range Limitations: The effective range of passive reflective relaying is strictly limited, as the signal strength drops off much faster than in direct-link scenarios Lipeng Zhu.
  • Sensing Challenges: In Integrated Sensing and Communications (ISAC), the problem is even worse. Yuanwei Liu et al. note that sensing signals often undergo a four-hop propagation path (Base Station $\to$ Surface $\to$ Target $\to$ Surface $\to$ Receiver), leading to extreme signal decay that limits detection accuracy for remote targets.
  • Channel Estimation: The double-fading effect significantly reduces the SNR of pilot signals, requiring either high transmission power or extended training periods to acquire accurate channel state information Yanze Zhu et al..

Breaking the Bottleneck with Active RIS

To address these limitations, researchers have proposed a shift from passive to Active RIS (ARIS). By integrating low-power amplifiers into the surface elements, ARIS can amplify the reflected signal, effectively "breaking" the multiplicative fading chain.

Zijian Zhang et al. demonstrate through hardware experiments that active surfaces can provide capacity gains of up to 130% in scenarios where passive versions offer negligible benefits. Similarly, Xinwei Yue et al. show that ARIS-aided Non-Orthogonal Multiple Access (NOMA) networks offer superior performance even when accounting for real-world hardware impairments. By boosting the signal at the point of reflection, these active elements allow the link to overcome the $d_1^2 \times d_2^2$ penalty, making them viable for long-range and outdoor-to-indoor communications Xie Xie et al..

Architectural Alternatives

Beyond active amplification, new architectural paradigms aim to mitigate double fading through spatial and mechanical flexibility:

  1. Simultaneously Transmitting and Reflecting Surfaces (STARS): By moving beyond simple reflection to allow signals to pass through the surface, STARS provides 360° coverage. However, the authors of Active Simultaneously Transmitting and Reflecting Surface Assisted NOMA Networks note that even these systems require active components to combat the inherent multiplicative losses in cascaded channels.
  2. Aerial RIS (AIRS): Yong Zeng et al. propose mounting surfaces on UAVs. By optimizing the surface's location in 3D space, the system can maintain better line-of-sight connectivity, reducing the severity of the path loss compared to static, wall-mounted surfaces.
  3. Pinching-Antenna Systems (PASS): A more radical approach involves moving the radiation points themselves. Zhiguo Ding introduces antennas that can be "pinched" into existence along a waveguide, allowing the antenna to physically follow the user and maintain a strong direct link, thereby avoiding the multi-hop degradation of reflective surfaces altogether.

While passive RIS remains an attractive low-power solution for short-range coverage, the consensus across recent work—from Ertugrul Basar to Hong Ren et al.—is that overcoming the double-fading effect is the primary hurdle for the widespread adoption of intelligent surfaces in 6G.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 137 papers
  2. Version 1 · 2026-10-04 · 168 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_double_fading_effect_19a5c9dd,
  title = {double-fading effect},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/double-fading-effect/rdr_19a5c9ddc8fa498092b8ba0e8ace74b2},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 2, frozen text):

@misc{lacuna_double_fading_effect_19a5c9dd_v2,
  title = {double-fading effect},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/double-fading-effect/rdr_19a5c9ddc8fa498092b8ba0e8ace74b2/v/2},
  note = {Version 2, frozen 2026-10-04. Accessed 2026-11-19},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake