Phased array antennas steer beams electronically by altering the phase relationship between individual radiating elements. However, conventional phased arrays face a fundamental geometric and electromagnetic bottleneck: as the steering angle increases away from the boresight, the effective aperture area shrinks, causing a severe drop in gain (often modeled as a $\cos^n\theta$ roll-off). Furthermore, if the individual elements have narrow radiation patterns or are spaced too far apart, wide-angle scanning becomes impossible due to scan blindness or the emergence of unwanted grating lobes.
To achieve seamless, wide-angle coverage across broad bandwidths—a necessity for 5G millimeter-wave communications and modern radar—researchers are redesigning both the individual antenna elements and the underlying feed networks.
Engineering the Element: Widening the Radiation Pattern
To scan widely without losing signal strength, the individual element itself must radiate energy over a broad angular space. Standard microstrip patches or dipoles naturally focus energy forward. To break this limitation, researchers manipulate the electromagnetic fields at the element level using three primary strategies:
1. Multimode Resonance
Instead of relying on a single resonant mode, multiple modes can be excited simultaneously to flatten and widen the beam. For instance, Dongsheng Li et al. demonstrated in Single-Layer Wide-Angle Scanning Linear Phased Arrays Based on Multimode Microstrip Patch Elements that exciting both the $\text{TM}_{01}$ and $\text{TM}_{21}$ modes within a single-layer patch broadens the 3 dB beamwidth to roughly 150° in both principal planes. This allows the resulting linear array to scan from $-60^\circ$ to $+60^\circ$ with minimal gain loss.
2. Parasitic Loading and Sub-Wavelength Scaling
To prevent grating lobes, elements must be packed tightly (often less than a half-wavelength apart). Da Yu et al. achieved an ultra-compact footprint alongside a 190° beamwidth in Design of Compact Wide-beam Broadband Antenna for Wide-angle Scanning Applications by introducing an air gap and two parasitic metal columns. These parasitic structures alter the local current distribution, forcing the element to radiate wider while remaining physically small.
Similarly, Haoran Zhao et al. utilized MEMS-based parasitic patches on quartz substrates in Micro-Electromechanical System-Based Parasitic Patch Antenna on Quartz Substrate for High Gain to expand the operational bandwidth to 30%, proving that parasitic coupling can simultaneously optimize bandwidth and radiation efficiency. To achieve wideband polarization alongside wide coverage, Wei Xue et al. demonstrated in Wideband Single-Fed Circularly Polarized Stacked Patch Antenna With L-Shaped Stub that integrating an L-shaped stub and an opening slot into a single-fed stacked patch antenna can push the impedance bandwidth past 40% while maintaining a high front-to-back ratio.
3. Artificial Magnetic Conductors (AMCs)
Placing an antenna close to a standard metallic ground plane causes destructive interference due to a 180° phase reflection, which narrows the beam. By replacing the ground plane with an AMC surface, which reflects waves in-phase, H L wen et al. showed in Low-Cost Phased Array with Enhanced Gain at the Largest Deflection Angle that dipole elements can achieve the wide beamwidth necessary to maintain high gain even at the maximum deflection angles of a low-cost 1-bit phased array.
Standard Ground Plane (180° Reflection) Artificial Magnetic Conductor (0° Reflection)
↓ Reflected Wave (Inverted) ↓ Reflected Wave (In-Phase)
═══ ═════════════════════════ ═══ ═════════════════════════
Destructive Interference Constructive Interference
(Narrower Beamwidth) (Wider Beamwidth)
Preserving Signal Integrity: Broadband Feed Networks
Widening the element's beamwidth is only half the battle; the array must also maintain precise phase and amplitude distributions across a wide frequency spectrum. In conventional corporate feed networks, frequency dispersion causes "beam squint," where the steering angle shifts unpredictably as the frequency changes.
To combat this, researchers are turning to true-time delay (TTD) and advanced shielding. Yuchen Luan et al. implemented microwave photonics to introduce optical true-time delay in Broadband Beam-Scanning Phased Array Based on Microwave Photonics. Because optical delay lines provide a constant time delay rather than a fixed phase shift, the array successfully scans $\pm 20^\circ$ across a 12–17 GHz band without beam-squint.
To ensure that the signals reaching these elements remain uncorrupted by parasitic surface waves or mutual coupling, the authors of Performance Enhancement of mm-Wave Phased Arrays for Mobile Terminals Through Grounded Coplanar Waveguide Feeding Networks With via Fences utilized grounded coplanar waveguide (GCPW) networks shielded by via fences, preserving beam-steering stability across the 26–36 GHz millimeter-wave spectrum.
Beyond modifying the feed lines themselves, geometric alterations to the ground plane can drastically improve bandwidth. In Design of Wideband Antenna Array with Dielectric Lens and Defected Ground Structure, Jinhang Wang et al. combined a defected ground structure (DGS)—which alters ground plane currents to improve impedance matching—with a dielectric lens to achieve a wide 46.15% bandwidth and high radiation efficiency.
Optimizing the Power Chain
Wideband, wide-angle radiation places stringent demands on the driving electronics. Amplifiers must deliver consistent power across multiple or highly extended frequency bands without degrading efficiency.
Guojin Li et al. addressed this at the circuit level in Design of Efficient Concurrent Dual-Frequency Doherty Power Amplifier Based on Step Impedance Low-Pass Filter by designing a concurrent dual-band Doherty power amplifier (2.0/3.5 GHz) that utilizes step-impedance low-pass filters to maintain high drain efficiency even at 6 dB power back-off. For continuous broadband performance, Yuekuan Yang et al. introduced a non-integer ratio coaxial line impedance transformation method in A Non-Integer Ratio Impedance Conversion Broadband RF Power Amplifier, enabling high efficiency (>55%) and stable gain across a massive 2 to 650 MHz range.
By co-designing the physical mode structure of the antenna elements (via parasitics, AMCs, and multimode resonance) alongside the phase integrity of the feeding network, modern phased arrays break the traditional limits of scan loss and narrow bandwidth.
Key Foundational Work
Single-Layer Wide-Angle Scanning Linear Phased Arrays Based on Multimode Microstrip Patch Elements (2023) — contributed 3 concept elements to this direction.
Design of Efficient Concurrent Dual-Frequency Doherty Power Amplifier Based on Step Impedance Low-Pass Filter (2023) — contributed 2 concept elements to this direction.
Design of Wideband Antenna Array with Dielectric Lens and Defected Ground Structure (2021) — contributed 1 concept elements to this direction.