The transition from laboratory-scale energy storage to practical, high-power commercial devices is frequently stalled by a single physical bottleneck: sluggish ion diffusion kinetics. While a material might show exceptional capacity in a thin-film laboratory setting, that performance often collapses when scaled to the "high mass loading" required for real-world batteries and supercapacitors.
The research across these 22 papers converges on a shared realization: to build the next generation of energy storage, we must re-engineer the internal pathways of electrodes to minimize the distance and resistance ions encounter as they move through the solid state.
The Mass Loading Gap
In a typical laboratory experiment, researchers use very thin layers of active material. In these "low-loading" settings, ions only need to travel a few nanometers to reach an active site. However, as Yu Liang and Kang Ren point out, commercial electrodes must be thick to store meaningful amounts of energy.
As electrode thickness increases, the "tortuosity"—the twisty, obstructed path an ion must take—increases exponentially. This creates a kinetic bottleneck where the internal resistance of the electrode rises, and the battery cannot be charged or discharged quickly without losing most of its capacity. Nancy Chen and Minghao Hua emphasize that bridging this "scalability gap" is the primary challenge for moving promising materials like silicon or disordered rocksalt oxides into industrial applications.
Engineering the Geometry of Speed
To solve the kinetic problem, researchers are moving away from "bulk" materials toward 3D nanoarchitectures. The intuition is simple: if the ion cannot move fast through the material, move the material closer to the ion.
- Hollow and Porous Structures: Wen Yang demonstrates the use of hollow, cage-like nickel-cobalt hydroxides. By creating a porous "shell" rather than a solid block, the distance an ion must diffuse into the solid lattice is drastically reduced.
- Dimensional Gradients: Pengcheng Li describes a "sheet–tube–dots" architecture. By growing carbon nanotubes on MXene sheets and anchoring nanoparticles to them, they create a hierarchical highway system that allows ions to move rapidly across different scales.
- Interlayer Expansion: For larger ions like sodium, the physical gaps between atomic layers in a cathode are often too narrow. Hui Xiong and Hyun Deog Yoo explore expanding these interlayer spacings to lower the "friction" ions experience as they intercalate.
The Electrostatic Friction of Multivalent Ions
The kinetic challenge is even steeper for multivalent ions like Magnesium ($Mg^{2+}$) or Zinc ($Zn^{2+}$). Because these ions carry a $+2$ charge, they are "stickier" than Lithium ($Li^+$). As J. Alberto Blázquez explains, the high charge density of divalent ions causes them to polarize the surrounding lattice, creating strong electrostatic interactions that act like a drag.
To bypass this, Yan-Qun Xiang and Yee-Seul Kim suggest a "proton shortcut." By using proton ($H^+$) insertion instead of metal-ion insertion, electrodes can achieve much faster kinetics because protons are smaller and move more easily through aqueous environments and solid lattices at neutral pH.
Decoupling Transport from the Lattice
In traditional solid electrolytes, ions move only when the polymer chains or crystal lattices around them shift. This "coupled transport" creates an inherent speed limit. Michael A. Stolberg and colleagues have worked to decouple this movement by creating "ionenes"—materials with fluorinated anionic channels that allow cations to "hop" between sites with record-low activation energy.
Similarly, Jie Lei shows that anchoring polyoxometalate clusters onto graphene can catalyze the redox reactions of sulfur, which are normally slowed by the insulating nature of the discharge products. By modulating the electronic environment at the molecular scale, researchers can lower the energy barriers that typically cause high overpotentials and slow charging.
Conclusion
The shift in the field is clear: we are moving from a focus on what a material can store to how fast it can store it at scale. By combining 3D nanoarchitectures—like the wood-derived quills of Nancy Chen or the aerogels described in Nano-Micro 2021—with a deeper understanding of ion-lattice interactions, researchers are finally overcoming the sluggish kinetics that have long limited high-power energy storage.