Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte

Jinxing Wang, Peiyang Zhang, Xuan Mou, Jingdong Yang, Jiaxu Wang, Guangsheng Huang, Jingfeng WangEnergies 2025 · DOI

TL;DR

This paper investigates the Na3V2(PO4)3@C (NVP@C) cathode for magnesium-ion batteries (MIBs) using a Mg(TFSI)2/DME electrolyte. They demonstrate a promising high operating voltage and a reversible intercalation-deintercalation mechanism, though performance is ultimately limited by sluggish Mg2+ diffusion due to CEI film densification.

What Problem Does This Paper Address?

Magnesium-ion batteries (MIBs) hold significant promise for next-generation energy storage due to magnesium's high theoretical capacity and abundance. However, their widespread adoption is hindered by challenges like slow desolvation kinetics of Mg2+ ions and poor reversibility. Mg2+ ions, with their high charge density, strongly interact with solvent molecules in electrolytes, creating a significant energy barrier for their movement into and out of cathode materials. This leads to sluggish ion migration, limited electrochemical windows, and ultimately, poor battery performance. This research aims to address these limitations by exploring a specific cathode material, NVP@C, and a suitable electrolyte to achieve higher operating voltages and understand the underlying magnesium storage mechanism.

Methods

The researchers synthesized the NVP@C cathode material using a sol-gel method, which is a common technique for creating advanced materials. They then characterized its structure and morphology using X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and Fourier Transform Infrared Spectroscopy (FTIR). To understand the electrochemical performance, they employed Cyclic Voltammetry (CV) and galvanostatic charge-discharge tests. Crucially, to elucidate the magnesium storage mechanism, they utilized Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) to track elemental composition changes during cycling and performed ex situ XRD and FTIR analyses on the cathode material at different charge/discharge states. Electrochemical Impedance Spectroscopy (EIS) was used to probe the reaction kinetics and ion diffusion.

Datasets

Not discussed in the paper. The study focuses on experimental characterization and electrochemical testing of a synthesized material.

Key Insights and Ideas

  • High Voltage Potential: NVP@C demonstrates a promising discharge voltage of 0.75 V vs. activated carbon (equivalent to 3.5 V vs. Mg/Mg2+), positioning it as a potential candidate for high-voltage MIB systems.
  • Three-Stage Mechanism: The magnesium storage process is not a simple intercalation but a more complex three-stage mechanism: "sodium extraction → magnesium intercalation → magnesium deintercalation." This pre-extraction of sodium is crucial for subsequent magnesium intercalation.
  • Structural and Chemical Reversibility: Despite the challenges of Mg2+ ion transport, the NVP@C material exhibits excellent structural and chemical reversibility. Ex situ XRD shows minimal lattice parameter changes (<0.5%), and FTIR confirms reversible shifts in PO4 and VO6 functional groups, indicating the core structure remains intact.
  • CEI Film Densification as the Bottleneck: While the charge transfer resistance (Rct) decreases with cycling (suggesting improved kinetics), the primary cause of performance degradation is identified as the gradual densification of the solid electrolyte interphase (CEI) film. This densification significantly hinders Mg2+ diffusion, outweighing any improvements in charge transfer.

Key Results

  • Discharge Capacity: At a current density of 50 mA/g, the NVP@C cathode delivered a maximum discharge specific capacity of 62 mAh/g.
  • Cycling Stability: After 200 cycles at 50 mA/g, the capacity retention was 66%.
  • Voltage Window: The NVP@C cathode operates at a discharge voltage of 0.75 V vs. activated carbon (3.5 V vs. Mg/Mg2+).
  • Structural Integrity: Ex situ XRD revealed lattice parameter variations below 0.5% throughout the cycling process.
  • EIS Analysis: While Rct decreased significantly after 1000 cycles (from 179.3 Ω to 47.55 Ω), the Warburg impedance (W1), reflecting Mg2+ diffusion, fluctuated and ultimately indicated hindered diffusion.

Limitations and Future Work

The paper acknowledges that the observed performance degradation, particularly at higher current densities, is primarily due to the sluggish Mg2+ diffusion caused by CEI film densification. While the NVP@C material itself shows good reversibility, the electrolyte transport efficiency and interface impedance remain limiting factors.

The authors suggest that future research should focus on:

  • Electrolyte Modification: Developing electrolytes that can better facilitate Mg2+ desolvation and transport.
  • Material Interface Modification: Exploring strategies like inorganic coating via Atomic Layer Deposition (ALD) to create more stable and conductive CEI layers.

These advancements are crucial for laying the groundwork for the practical application of high-voltage magnesium-ion batteries.

Summary updated

Abstract

Magnesium metal boasts a high theoretical volumetric specific capacity and abundant reserves. Magnesium batteries offer high safety and environmental friendliness. In recent years, magnesium-ion batteries (MIBs) with Mg or Mg alloys as anodes have garnered extensive interest and emerged as promising candidates for next-generation competitive energy storage technologies. However, MIBs are plagued by issues such as sluggish desolvation kinetics and slow migration kinetics, which lead to limitations including a limited electrochemical window and poor magnesium storage reversibility. Herein, the sodium vanadium phosphate @ carbon (Na3V2(PO4)3@C, hereafter abbreviated as NVP@C) cathode material was synthesized via a sol–gel method. The electrochemical performance and magnesium storage mechanism of NVP@C in a 0.5 M magnesium bis(trifluoromethanesulfonyl)imide/ethylene glycol dimethyl ether (Mg(TFSI)2/DME) electrolyte were investigated. The as-prepared NVP@C features a pure-phase orthorhombic structure with a porous microspherical morphology. The discharge voltage of NVP@C is 0.75 V vs. activated carbon (AC), corresponding to 3.5 V vs. Mg/Mg2+. The magnesium storage process of NVP@C is tentatively proposed to follow a ‘sodium extraction → magnesium intercalation → magnesium deintercalation’ three-step intercalation–deintercalation mechanism, based on the characterization results of ICP-OES, ex situ XRD, and FTIR. No abnormal phases are generated throughout the process, and the lattice parameter variation is below 0.5%. Additionally, the vibration peaks of PO4 tetrahedrons and VO6 octahedrons shift reversibly, and the valence state transitions between V3+ and V4+/V5+ are reversible. These results confirm the excellent reversibility of the material’s structure and chemical environment. At a current density of 50 mA/g, NVP@C delivers a maximum discharge specific capacity of 62 mAh/g, with a capacity retention rate of 66% after 200 cycles. The observed performance degradation is attributed to the gradual densification of the CEI film during cycling, leading to increased Mg2+ diffusion resistance. This work offers valuable insights for the development of high-voltage MIB systems.
BibTeX
@inproceedings{wang2025study,
  author = {Jinxing Wang and Peiyang Zhang and Xuan Mou and Jingdong Yang and Jiaxu Wang and Guangsheng Huang and Jingfeng Wang},
  title = {{Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18225975},
}
Figure