The fundamental challenge of the modern Internet of Things (IoT) is energy. While we can transmit data across the globe, powering the billions of tiny sensors that collect this data remains a physical hurdle. The most promising solution is Simultaneous Wireless Information and Power Transfer (SWIPT), a paradigm where radio frequency (RF) signals serve a dual purpose: carrying bitstreams and delivering harvestable energy.
However, SWIPT faces a brutal physical reality: the inverse-square law. As Xiao Lu and colleagues note in their contemporary survey, RF energy decays rapidly over distance. This "path loss" creates a steep trade-off—devices close to a transmitter are flooded with energy, while those at the network edge starve, unable to harvest enough power to even stay awake.
To bridge this distance gap, researchers are moving beyond simple point-to-point broadcasting toward systems that physically and electromagnetically "shape" the environment.
Spatial Focusing through Smart Surfaces
If a standard antenna is like a lightbulb casting light in all directions, a Reconfigurable Intelligent Surface (RIS) is like a smart mirror. An RIS consists of an array of passive elements that can shift the phase of incoming waves, reflecting them to converge at a specific point in space.
Yi Fang 0005 and his team demonstrated that by using these "smart mirrors," we can boost signal strength at remote locations without the power-hungry electronics of traditional relays Design of a Reconfigurable Intelligent Surface-Assisted FM-DCSK-SWIPT Scheme.
A critical design choice in these surfaces is whether they should be "active" or "passive." Guangyu Zhu and Xidong Mu have explored this extensively, finding that while active surfaces (which amplify signals) are effective for small deployments, massive passive surfaces are often superior under a fixed power budget STAR-RIS Assisted SWIPT Systems: Active or Passive?. The sheer size of a passive surface allows for such precise beamforming "focus" that it overcomes the lack of internal amplification.
Distributed Antennas and Collaborative Relaying
Another way to defeat path loss is to change the geometry of the transmitter itself. Instead of one powerful central tower, Distributed Antenna Systems (DAS) spread multiple antennas across a geographic area.
Dongjae Kim showed that DAS is particularly effective for SWIPT because it reduces the average distance between any given user and their nearest power source SWIPT-enabled NOMA in Distributed Antenna System. This ensures that edge users, who would normally be in a "dead zone," receive sufficient energy to remain self-sustaining.
When dedicated infrastructure isn't available, the devices themselves can collaborate. Lina Yuan and Jing Gong describe "virtual MIMO," where groups of single-antenna sensors coordinate their transmissions to act like a single, powerful multi-antenna array Multi-mode Collaborative Communication Technologies. This cooperation allows the cluster to "reach" a distant base station using far less total energy than if each node tried to transmit individually.
The Rise of Pinching-Antenna Systems
The most radical approach to the distance problem is to make the antennas themselves mobile. Traditional antennas are fixed in place, but Pinching-Antenna Systems (PASS) allow antenna elements to slide along a dielectric waveguide.
As Haoyun Li and Ming Xiao explain, PASS can physically "pinch" or move closer to a user to maintain a high-quality line-of-sight link MIMO Pinching-Antenna-Aided SWIPT. By dynamically adjusting their physical positions, these systems can optimize the "Rate-Energy" trade-off in real-time. Qi Yang demonstrates that this physical flexibility significantly expands the achievable range of SWIPT compared to even the most advanced fixed-antenna technologies Pinching-Antenna Systems-Assisted SWIPT: A Rate-Energy Trade-off Perspective.
Resonant Coupling and Coil Optimization
For near-field applications, such as charging medical implants or consumer electronics, the mechanism shifts from propagating waves to magnetic resonance. Here, the "effective transfer distance" is limited by the quality of the magnetic coupling.
Yang Li 0083 and Shan Jiang 0020 have shown that there is a "sweet spot" for coil design; simply making a coil larger does not always increase range Influences of Coil Radius on Effective Transfer Distance. Instead, precise optimization of coil pitch, turns, and radius is required to maintain the high "Quality Factor" (Q) necessary for efficient energy transfer across a gap Maximizing Transfer Distance for WPT.
Summary
The research direction is clear: to make wireless power practical, we cannot simply turn up the volume. Instead, we must use spatial intelligence. Whether through the smart reflections of RIS, the collaborative reach of distributed antennas, or the physical mobility of pinching antennas, the goal is to focus energy exactly where it is needed, turning the "detrimental" path loss of the environment into a manageable engineering variable.