Energy-efficiency Optimization Schemes Based on SWIPT in Distributed Antenna Systems

WeiYe Xu, Junya Chu, Xiangbin Yu, Huiyu Zhou

Abstract

Simultaneous Wireless Information and Power Transfer (SWIPT) is a promising technology for powering the massive Internet of Things (IoT) ecosystem. However, the rapid decay of radio frequency (RF) energy over distance poses a significant challenge for practical implementation. This paper explores the use of Distributed Antenna Systems (DAS) to mitigate this issue. We propose an optimal resource allocation scheme and a high-efficiency suboptimal scheme based on antenna selection. Our findings indicate that the suboptimal approach provides near-optimal energy efficiency with significantly reduced computational overhead, offering a practical solution for energy-constrained wireless networks.

Introduction

As the number of IoT devices grows, traditional battery-based power solutions become increasingly impractical. SWIPT addresses this by using RF signals to concurrently deliver data and energy. A critical bottleneck in SWIPT is the distance-dependent path loss of RF energy. In centralized antenna systems, users at the cell edge often fail to harvest sufficient energy. Distributed Antenna Systems (DAS) overcome this by scattering Remote Antenna Units (RAUs) across the coverage area, effectively shortening the transmission distance to the user.

System Model and SWIPT Architecture

The proposed system utilizes a DAS architecture where multiple RAUs are connected to a central processing unit (CPU) via high-speed links. This spatial diversity is key to improving both information rate and energy harvesting (EH) performance.

Architecture of a Distributed Antenna System (DAS) featuring multiple Remote Antenna Units (RAUs) and a central CPU.

At the user side, a power-splitting (PS) architecture is employed. The received signal is divided into two streams: one for information decoding (ID) and another for energy harvesting (EH). The ratio of this split, denoted by $\rho$, is a critical parameter for optimizing the system's overall energy efficiency (EE).

User receiver architecture for SWIPT, illustrating the power splitting mechanism between Energy Harvesting and Information Decoding circuits.

Resource Allocation Schemes

The objective is to maximize the system's Energy Efficiency (EE), defined as the ratio of the achievable data rate to the total power consumption, subject to minimum energy harvesting and transmit power constraints.

1. Optimal Resource Allocation (RA) Scheme

This scheme seeks the global maximum EE by jointly optimizing the transmit power of all RAUs and the PS ratio. The authors employ Karush-Kuhn-Tucker (KKT) conditions to derive the optimal power allocation for a given PS ratio, followed by a one-dimensional exhaustive search to determine the optimal $\rho$. While providing a performance benchmark, this method is computationally intensive.

2. Suboptimal RA Scheme (Antenna Selection)

To address the complexity of the optimal scheme, a "greedy" antenna selection strategy is proposed. The system selects the single RAU with the highest Signal-to-Noise Ratio (SNR) for transmission. By reducing the problem to a single-antenna scenario, the optimization can be solved efficiently using Dinkelbach’s method and the Lambert W function, resulting in a closed-form solution.

Results and Performance Analysis

The performance of these schemes was evaluated through simulations in a DAS environment with a 1000m cell radius, 8dB shadow fading, and typical hardware power consumption parameters.

  • Efficiency vs. Complexity: The suboptimal antenna selection scheme achieves an EE nearly identical to the optimal scheme, particularly at higher transmit powers. Crucially, it operates approximately 25 times faster than the optimal search (30 seconds vs. 800 seconds for a 7-antenna setup).
  • The EH Trade-off: Increasing the minimum required energy harvesting threshold leads to a significant decrease in energy efficiency. This highlights the inherent cost of delivering wireless power alongside data.
  • Scalability: Increasing the number of RAUs improves the system's EE by providing better spatial diversity and reducing the average distance between the transmitter and the user.

Conclusion

Distributed Antenna Systems are essential for making SWIPT a viable technology for IoT. While optimal coordination of all antennas provides the best theoretical performance, a simplified antenna selection scheme offers a compelling alternative for real-time applications due to its low computational complexity and near-optimal results. Future work will investigate the impact of imperfect channel state information (CSI) and the scalability of these models in Massive MIMO environments.

Summary updated

Abstract

KSII Transactions on Internet and Information Systems
BibTeX
@article{xu2021energy,
  author = {WeiYe Xu and Junya Chu and Xiangbin Yu and Huiyu Zhou},
  title = {{Energy-efficiency Optimization Schemes Based on SWIPT in Distributed Antenna Systems}},
  journal = {KSII Trans. Internet Inf. Syst.},
  year = {2021},
  doi = {10.3837/tiis.2021.02.016},
}
Figure