Pinching-Antenna Systems-Assisted SWIPT: A Rate-Energy Trade-off Perspective

Qi Yang, Kai Liu, Jingjing Zhao, Kaiquan Cai, Xidong Mu, Yuanwei LiuarXiv 2025 · DOI · arXiv

TL;DR

This paper introduces Pinching-Antenna Systems (PASS) as a game-changer for Simultaneous Wireless Information and Power Transfer (SWIPT). By allowing antennas to slide freely along a dielectric waveguide, PASS can physically move closer to users to overcome path loss, significantly expanding the achievable "Rate-Energy" region compared to traditional fixed-antenna or even recent movable-antenna technologies.

What Problem Does This Paper Address?

Wireless networks face a dual challenge: providing high-speed data (Information Transfer) and sustainable energy (Power Transfer) to a growing sea of IoT devices. SWIPT aims to do both using the same radio frequency signals. However, SWIPT is notoriously sensitive to channel quality; if the signal is weak, neither data nor power can be delivered effectively.

Conventional systems use fixed antennas, which are stuck in one place. Newer "Movable Antennas" (MA) can shift slightly, but usually only within a few wavelengths—not enough to bypass major obstacles or significantly reduce distance-based path loss. This paper explores PASS, where antennas (made of low-cost dielectric materials) can be positioned anywhere along a long waveguide. This provides a massive new degree of freedom to optimize the wireless environment for both information and energy users.

Methods

The authors tackle two main scenarios using a mix of geometric optimization and heuristic algorithms:

  1. Single User Scenario: To maximize the weighted sum of data rate and harvested energy, they propose a two-stage algorithm.
  2. Stage 1: Uses Successive Convex Approximation (SCA) to find "coarse" antenna positions that minimize large-scale path loss (getting the antennas as close to the users as possible).
  3. Stage 2: A fine-tuning method adjusts these positions by tiny increments (fractions of a wavelength) to align the phases of the signals, ensuring they combine constructively at the receiver.
  4. Multi-User Scenario: They consider three multiple access schemes: FDMA, TDMA, and NOMA. Because maximizing the rate for one user often hurts another, they formulate a Multi-Objective Optimization Problem (MOOP).
  5. They use the $\epsilon$-constraint method to turn the MOOP into a single-objective problem.
  6. They employ Particle Swarm Optimization (PSO) to find the best antenna positions and standard convex optimization (CVX) to allocate resources like power and time/frequency slots.

Datasets

This research is based on theoretical modeling and numerical simulations rather than a static dataset. The simulation parameters are grounded in realistic 5G/6G expectations:

  • Carrier Frequency: 28 GHz (Millimeter wave).
  • Waveguide Length: 20 meters.
  • Environment: A 3D Cartesian coordinate system where users are distributed in a service area below the waveguide.
  • Benchmarks: The PASS performance is compared against conventional fixed-position MIMO systems and single-antenna benchmarks.

Key Insights and Ideas

  • Distance is King: Unlike traditional beamforming which only adjusts signal phase, PASS adjusts the physical distance. By sliding antennas closer to a user, it reduces path loss exponentially, which is far more effective for energy harvesting than phase-shifting alone.
  • The TDMA Advantage: In multi-user PASS, TDMA (Time Division Multiple Access) emerges as the winner. Why? Because the antennas can physically "re-deploy" between time slots. In slot A, they move to favor User 1; in slot B, they slide over to favor User 2. FDMA and NOMA require the antennas to stay in one "compromise" position to serve everyone at once.
  • Rectangular Pareto Frontiers: The Rate-Energy (R-E) region for PASS is much more "rectangular" than fixed MIMO. This means you can significantly increase the harvested energy with only a minimal sacrifice in data rate, whereas fixed systems see a much sharper drop-off.

Key Results

  • Superior R-E Region: PASS achieves a significantly larger Rate-Energy region than conventional MIMO. For example, a PASS system with only 4 antennas can outperform a fixed MIMO system with 8 antennas in many scenarios.
  • Fairness: The proposed algorithms successfully maximize the minimum rate and minimum energy across multiple users, ensuring no single device is left without a connection or power.
  • Convergence: The PSO-based algorithms are shown to converge quickly (typically within 6–10 iterations), suggesting that while the problem is complex, it is computationally manageable.

Limitations and Future Work

  • Hardware Latency: The paper assumes antennas can be repositioned quickly. In practice, the mechanical speed of moving a "pinching" antenna along a waveguide could limit how fast the system adapts to highly mobile users.
  • Waveguide Losses: While the model accounts for path loss in the air, the internal losses of the dielectric waveguide as the signal travels to the "pinched" antennas could be explored further in experimental setups.
  • 3D Environments: Future work could extend this to more complex 3D environments with multiple waveguides or non-linear energy harvesting models to better reflect real-world hardware limitations.

Reference: Yang, Q., et al. "Pinching-Antenna Systems-Assisted SWIPT: A Rate-Energy Trade-off Perspective." arXiv:2511.22224v1, Nov 2025.

Summary updated

Abstract

This paper investigates the rate-energy trade-off for pinching-antenna systems (PASS)-assisted simultaneous wireless information and power transfer (SWIPT) systems. Both the single information user (IU)/energy user (EU) and multiple IUs/EUs scenarios are considered.1) For the single IU/EU scenario, a pinching beamforming optimization problem is formulated for simultaneously maximizing data rate and harvested energy. To tackle this problem, a two-stage algorithm is proposed. Specifically, the successive convex approximation (SCA) method is first invoked for minimizing the large-scale path loss, which is followed by the fine-tuning method for the phase alignment. 2) For the multiple IUs/EUs scenario, three multiple access schemes are considered, i.e., frequency division multiple access (FDMA), time division multiple access (TDMA), and non-orthogonal multiple access (NOMA). The corresponding multi-objective optimization problem (MOOP) that simultaneously maximizes the minimum data rate and minimum harvested energy is formulated for ensuring users' fairness. To address this problem, we adopt the $ε$-constraint method to first convert the intractable MOOPs to single-objective optimization problems (SOOPs). Then, for the SOOP under each multiple access protocol, the particle swarm optimization (PSO) and convex optimization methods are adopted for solving the pinching beamforming and resource allocation problems, respectively. Simulation results unveil that: i) PASS can achieve a significantly superior rate-energy region compared to conventional fixed-position antenna systems for pinching beamforming; and ii) by exploiting the time-switching feature, TDMA can outperform both NOMA and FDMA for the multiple IUs/EUs scenario.
BibTeX
@misc{yang2025pinching,
  author = {Qi Yang and Kai Liu and Jingjing Zhao and Kaiquan Cai and Xidong Mu and Yuanwei Liu},
  title = {{Pinching-Antenna Systems-Assisted SWIPT: A Rate-Energy Trade-off Perspective}},
  year = {2025},
  eprint = {2511.22224},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2511.22224},
  howpublished = {arXiv},
}
Figure