To monitor the health of a structure—whether it is a bridge, an aircraft landing gear, or a composite ship hull—we must measure how it deforms under load. Traditionally, engineers have relied on electrical resistance strain gauges. These gauges operate on a simple principle: stretching a wire makes it thinner and longer, which increases its electrical resistance.
However, electrical gauges face severe physical limitations. They are highly vulnerable to electromagnetic interference, prone to corrosion in harsh environments, require heavy and complex wiring networks, and can alter the mechanical properties of the very materials they are meant to monitor.
Fiber-optic strain sensing offers an elegant alternative by replacing electricity with light. Instead of measuring changes in resistance, these systems measure changes in how light propagates through a glass fiber. Because glass is immune to electromagnetic fields and can transmit signals over kilometers with minimal loss, fiber-optic sensors transform how we capture structural deformation.
The Physics of the Fiber Bragg Grating
The most common component in fiber-optic strain sensing is the Fiber Bragg Grating (FBG). An FBG is a small segment of an optical fiber where the refractive index of the core has been permanently altered to vary periodically.
When a broad spectrum of light is injected into the fiber, this periodic variation acts as a highly selective mirror. It reflects a single, sharp peak of light at a specific wavelength—known as the Bragg wavelength ($\lambda_B$)—while allowing all other colors to pass through unobstructed. The Bragg wavelength is directly determined by the spacing, or period, of the internal grating.
Injected Light --------> [ | | | | | | | ] --------> Transmitted Light
Fiber Bragg Grating
<-------- Reflected Light (Narrow Wavelength Peak)
As explained by Wen Chen et al. in Advancements in Battery Monitoring: Harnessing Fiber Grating Sensors for Enhanced Performance and Reliability, external physical factors like mechanical strain or temperature changes alter this internal structure. When the host structure deforms, it stretches or compresses the bonded optical fiber. This physical deformation changes the grating period, causing a precise, measurable shift in the reflected wavelength. An interrogation system—consisting of a light source, optical circulators, and a spectral analyzer—tracks this wavelength shift to calculate the exact strain experienced by the fiber.
Because the measurement is encoded entirely in the wavelength (the color of the light) rather than its intensity, the signal is exceptionally robust. As noted in a recent review on wearable sensors (Recent Advances in 3-D Printed, Wearable Pressure Sensors for Plantar Pressure Monitoring: A Review), this wavelength-encoded mechanism ensures that the sensor remains highly resistant to signal hysteresis and electromagnetic noise.
Eliminating Parasitic Stiffness via Embedding
A major advantage of optical fibers is their incredibly small form factor; a typical fiber is roughly the thickness of a human hair. This allows sensors to be embedded inside advanced composite materials during manufacturing, rather than merely attached to the surface.
Surface-mounted electrical gauges only capture external strain and can introduce a phenomenon known as parasitic stiffness. In highly flexible or soft structures, an electrical gauge acts like a tiny splint, locally stiffening the material and distorting the measurement.
To solve this problem, Hidetaka Houtani et al. utilized embedded FBG sensors within flexible composite ship hulls (Designing a Hydro-Structural Ship Model to Experimentally Measure its Vertical Bending and Torsional Vibrations). The authors demonstrated that because the optical fiber matches the flexibility of the surrounding material, it avoids introducing parasitic stiffness. This seamless integration allows the sensors to capture high-frequency vibration peaks during dynamic wave testing cleanly, without requiring the aggressive electronic data smoothing that traditional sensors demand (Fabrication of a Box-Shaped Hydro-Structural Ship Model Considering the Vertical-Bending and Torsional Mode Shapes).
Furthermore, embedding fibers provides a window into internal material degradation. Guang Yan et al. showed that embedded FBGs can reliably track internal strain changes throughout the entire lifecycle of a composite—from initial elastic deformation to microcracking, delamination, and final fracture—even after the material has suffered thermal degradation in harsh aerospace environments (Damage and Failure Monitoring of Aerospace Insulation Layers Based on Embedded Fiber Bragg Grating Sensors). To achieve a complete picture of structural health, Wuyi Li et al. developed a multi-sensor approach that pairs surface-mounted electrical gauges (to map external strain distributions) with embedded FBGs (to monitor internal layer-by-layer damage progression) (Structural Health Monitoring of Defective Carbon Fiber Reinforced Polymer Composites Based on Multi-Sensor Technology).
Decoupling Complex Forces
An individual FBG sensor is fundamentally one-dimensional: it measures strain strictly along the longitudinal axis of the fiber. However, real-world engineering components experience complex, multi-axis forces such as bending, torsion, and torque. Engineers overcome this limitation by using strategic geometric arrangements and mathematical models to isolate specific force components.
Torque and Torsion
When a rotating shaft experiences torque, it undergoes shear stress, which creates tension and compression zones at opposing $45^\circ$ angles relative to the shaft's axis. Fang Liu et al. leveraged this geometric reality by placing two FBGs on a rotating shaft at opposing $\pm 45^\circ$ angles (A Two Fiber Bragg Gratings Sensing System to Monitor the Torque of Rotating Shaft). By calculating the dynamic difference between the two reflected wavelengths, the system cancels out axial forces and temperature fluctuations, successfully decoupling pure torque and torsion angles from other extraneous movements.
Multi-Axis Load Mapping
For highly complex structures like aircraft landing gear, strain cannot be resolved by simple geometry alone. In Fiber Bragg Grating Based Load Monitoring for Carrier-Based Aircraft Main Landing Gear, Weijun Xue et al. implemented an array of FBG sensors coupled with a strain-load regression matrix. By characterizing how the structural geometry distributes multi-directional forces into localized strains, the regression model translates a vector of discrete wavelength shifts into an accurate real-time prediction of three-dimensional loads during takeoff and landing.
From Local Strain to Global Dynamics
Because FBGs provide exceptional precision, localized strain measurements can also be used to infer the global behavior of massive structures. Feng Xiao et al. demonstrated this by deploying FBG strain gages along long-span steel-girder bridges (Estimation of vehicle-induced bridge dynamic responses using fiber Bragg grating strain gages). By analyzing the high-resolution time-history data of local strains induced by passing trucks, the authors successfully reconstructed the global natural frequencies and mode shapes of the entire bridge structure. Similarly, Guoqian Wei et al. showed that targeting these high-resolution sensors at known stress concentration zones, such as the weld toes of cruciform joints, allows engineers to capture localized cyclic hardening and plastic yielding before structural failure occurs (Fiber Bragg Gratings Based Cyclic Strain Measuring of Weld Toes of Cruciform Joints).
Scaling Up: Quasi-Distributed vs. Fully Distributed Sensing
A single point measurement is rarely enough to monitor an entire infrastructure system. Fiber-optic technology scales efficiently from single-point sensing to continuous line sensing using two distinct methodologies: quasi-distributed and fully distributed sensing.
Quasi-Distributed Sensing (Wavelength Division Multiplexing)
To capture data at multiple distinct points along a single fiber, engineers use Wavelength Division Multiplexing (WDM). As explained by Jian Mao et al., multiple FBGs can be etched sequentially into a single optical fiber, provided that each grating is manufactured with a distinct baseline central wavelength (Feasibility Study on Temperature Distribution Measurement Method of Thrust Sliding Bearing Bush Based on FBG Quasi-Distributed Sensing). When light passes through the fiber, each sensor reflects its own unique color. As long as the strain-induced wavelength shifts do not overlap, a single interrogation instrument can simultaneously read dozens of localized sensing points along a single fiber run. This technique is highly effective for mapping discrete profiles, such as tracking axial force distribution along a foundation pile during soil penetration (Laboratory Test Study on Pile Jacking Penetration Mechanism Considering Different Diameter and Length Based on Photoelectric Integration Technology).
Injected Light ----> [ FBG 1: λ1 ] ----> [ FBG 2: λ2 ] ----> [ FBG 3: λ3 ]
(Reflects λ1) (Reflects λ2) (Reflects λ3)
Fully Distributed Sensing (Brillouin Scattering)
When monitoring kilometers of infrastructure, fabricating thousands of individual gratings becomes impractical. Distributed Fiber Optic Sensing (DFOS) eliminates the gratings entirely, turning the entire length of a standard, bare glass fiber into a continuous sensor.
This technique relies on Stimulated Brillouin Scattering (SBS), a non-linear optical phenomenon introduced to the field by Luc Thévenaz et al. (Applications of distributed Brillouin fiber sensing). When high-intensity light travels through a fiber, it generates microscopic acoustic waves due to electrostriction. These acoustic waves create a moving index grating that scatters a small fraction of the light backward. The frequency of this backscattered light is shifted by an amount proportional to the local velocity of sound in the glass, which changes linearly with local strain and temperature.
By pairing this scattering physics with time-of-flight measurements—a technique known as Brillouin Optical Time Domain Analysis (BOTDA)—engineers can map strain continuously along a fiber. Because the speed of light in glass is known, the time delay between launching a pulse of light and receiving the backscattered signal pinpoints the exact location of the strain.
To enhance the spatial resolution of these measurements, Zhen Li et al. utilized a variant called Differential Pulse-Width Pair BOTDA (DPP-BOTDA) embedded within flexible beams (Optical-Fiber-Embedded Beam for Subgrade Distributed Settlement Monitoring: Experiments and Numerical Modeling). By embedding the fiber inside a structural beam rather than burying it directly in the soil, the authors leveraged the beam's structural integrity to maintain continuous coupling with the ground, enabling precise, distributed monitoring of subgrade settlement.
Ultimately, whether using discrete FBGs or fully distributed Brillouin scattering, the underlying magic remains the same: by translating physical deformation into optical parameters like spectral shifts and bending losses, engineers can indirectly but precisely infer structural displacement and health (Research on Displacement Monitoring of Key Points in Caverns Based on Distributed Fiber Optic Sensing Technology). When integrated with modern wireless sensor networks and cloud platforms, these optical techniques provide a stable, precise, and scalable foundation for the real-time monitoring of complex modern infrastructure (Research Progress of SHM System for Super High-Rise Buildings Based on Wireless Sensor Network and Cloud Platform).
Key Foundational Work
<title>Truly distributed strain and temperature sensing using embedded optical fibers</title> (1998) — contributed 2 concept elements to this direction.
A Two Fiber Bragg Gratings Sensing System to Monitor the Torque of Rotating Shaft (2016) — contributed 2 concept elements to this direction.
<title>Applications of distributed Brillouin fiber sensing</title> (1998) — contributed 1 concept elements to this direction.