Feasibility Study on Temperature Distribution Measurement Method of Thrust Sliding Bearing Bush Based on FBG Quasi-Distributed Sensing

Hu Liu, Qiang Yu, Yuegang Tan, Wenjun Xu, Bing Huang, Zhichao Xie, Jian MaoSensors 2019 · DOI

TL;DR

This paper investigates a novel method for measuring the temperature distribution within thrust sliding bearing bushes using Fiber Bragg Grating (FBG) quasi-distributed sensing. The study demonstrates the feasibility and effectiveness of this FBG-based approach, showing it offers good accuracy, stability, and rapid response compared to traditional thermocouples, making it a promising solution for critical machinery monitoring.

What Problem Does This Paper Address?

Thrust sliding bearings are critical components in heavy machinery, such as those found in power generation and marine propulsion systems. Their reliable operation is paramount, as failures can lead to catastrophic consequences. A primary cause of failure in these bearings is overheating, stemming from friction and inadequate lubrication. Therefore, accurately monitoring the temperature distribution within the bearing bush is essential for preventing failures, optimizing performance, and extending service life.

Traditional methods for temperature measurement, such as thermocouples, often face challenges in this application. These include susceptibility to electromagnetic interference, difficulties in achieving dense spatial coverage in confined spaces, and potential inaccuracies due to complex working environments and thermal boundary conditions. While theoretical simulations and infrared thermography have been explored, they also have limitations in terms of accuracy, cost, and applicability to the specific conditions within a bearing bush. This paper aims to address this gap by exploring the feasibility of using FBG quasi-distributed sensing, which offers advantages like immunity to electromagnetic interference and compact sensor integration.

Methods

The core of this research lies in the application and validation of Fiber Bragg Grating (FBG) quasi-distributed sensing for temperature measurement. The authors developed a custom experimental setup featuring an imitation thrust sliding bearing bush.

Key methodological aspects include:

  • FBG Sensor Integration: Multiple FBG sensors were strategically embedded within the bearing bush structure. This involved creating grooves in the steel foundation of the bush and encapsulating the FBG sensors in copper tubes with heat-conducting silicone grease. The sensors were designed to be freely telescopic at one end to accommodate thermal expansion without affecting measurement accuracy.
  • Quasi-Distributed Sensing: The FBG sensors were arranged in a quasi-distributed manner, meaning multiple sensing points were integrated along a single optical fiber. This was achieved using wavelength division multiplexing (WDM), where each grating had a distinct central wavelength to allow for individual interrogation.
  • Calibration: A rigorous calibration process was performed using a temperature experimental box and an FBG interrogator. The sensitivity of each FBG sensor's measuring point was determined by measuring the change in wavelength (Δλ) corresponding to a change in temperature (ΔT).
  • Experimental Setup: An experimental platform was constructed to simulate the heating environment of a thrust sliding bearing. This included an insulation board, heater, steel plate (acting as a thermal buffer and simulating oil film heat), and the prepared bearing bush.
  • Testing Regimes: Two types of experiments were conducted:
  • Steady-State Experiments: The bearing bush was heated to various stable temperatures (50°C to 120°C), and the temperature readings from the FBG sensors were recorded.
  • Transient Experiments: The heating process was monitored over time, capturing the temperature response during both heating and cooling phases.
  • Comparison: The FBG sensor measurements were compared with those from a thermocouple embedded at a specific point (1-1) for validation.

Datasets

Not discussed in the paper. The study relies on experimental data generated from the custom-built test bench and imitation bearing bush.

Key Insights and Ideas

  • FBG's Suitability for Harsh Environments: The research highlights that FBGs, due to their inherent immunity to electromagnetic interference and small size, are well-suited for monitoring temperature in the challenging, high-friction environment of a thrust sliding bearing, where traditional sensors struggle.
  • Quasi-Distributed Sensing Efficiency: The FBG WDM approach allows for a high density of temperature measurement points within a compact space, overcoming the limitations of discrete sensor placement and wiring complexity associated with traditional methods.
  • Rapid and Stable Temperature Response: The FBG sensors demonstrated a faster response time and greater stability compared to thermocouples, as evidenced by the thinner measurement curves in the transient tests and the lack of lag.
  • Impact of Heat Dissipation: The study identified that variations in heat dissipation conditions at different measurement points within the bearing bush can lead to small temperature differences, even under steady-state conditions. This is an important consideration for interpreting temperature distribution data.
  • Effectiveness of Steel Plate Buffer: The inclusion of a steel plate in the experimental setup was found to be crucial for stabilizing temperature fluctuations, making the measurements more reliable and consistent.

Key Results

  • Accuracy: The FBG temperature sensors demonstrated good accuracy, with measurement errors less than 2°C when compared to thermocouple measurements.
  • Stability and Consistency: The FBG sensors exhibited good stability and consistency in their measurements across various temperatures and during transient heating/cooling cycles.
  • Rapid Response: The FBG sensors showed no lag and a faster response compared to thermocouples during transient temperature changes.
  • Feasibility: The study successfully demonstrated the feasibility of using FBG quasi-distributed sensing for measuring the temperature distribution of a thrust sliding bearing bush.

Limitations and Future Work

  • Imitation Bearing Bush: The experiments were conducted on an imitation thrust sliding bearing bush, not a full-scale operational prototype. While designed to mimic key aspects, real-world operational stresses and conditions might differ.
  • Limited Number of Sensors/Points: The study utilized three FBG sensors, each with four measuring points. While quasi-distributed, a higher density of sensors might be beneficial for a more detailed temperature map in complex geometries.
  • Specific Operating Conditions: The experiments focused on simulated heating conditions. Future work could explore the performance of the FBG system under actual operational loads, speeds, and lubrication conditions of a thrust sliding bearing.
  • Long-Term Durability: While packaging was used to protect the FBGs, long-term durability and performance in a continuously operating, high-vibration, and potentially contaminated environment would require further investigation.

The authors suggest that this method provides a solid technical foundation for subsequent, more detailed measurements of thrust sliding bearing bush temperature distribution, implying potential for further refinement and application in real-world scenarios.

Summary updated

BibTeX
@article{liu2019feasibility,
  author = {Hu Liu and Qiang Yu and Yuegang Tan and Wenjun Xu and Bing Huang and Zhichao Xie and Jian Mao},
  title = {{Feasibility Study on Temperature Distribution Measurement Method of Thrust Sliding Bearing Bush Based on FBG Quasi-Distributed Sensing}},
  journal = {Sensors},
  year = {2019},
  doi = {10.3390/s19143245},
}
Figure