A Two Fiber Bragg Gratings Sensing System to Monitor the Torque of Rotating Shaft

Yong-Jiao Wang, Lei Liang, Yin-Quan Yuan, Gang Xu, Fang LiuSensors 2016 · DOI

TL;DR

This paper presents a novel optical fiber sensing system using two Fiber Bragg Gratings (FBGs) to simultaneously monitor the torque and torsion angle of rotating shafts. By analyzing the dynamic difference in the reflected wavelengths of the FBGs, the system can accurately measure both static torque and dynamic vibrations, offering a robust alternative to traditional electrical sensors susceptible to electromagnetic interference.

What Problem Does This Paper Address?

Rotating machinery, crucial in industries from manufacturing to aviation, relies on the health of its rotating shafts. Monitoring these shafts for vibration and torque is essential for assessing their condition and preventing failures. Traditional methods often employ electrical sensors, which are prone to electromagnetic interference, limiting their reliability in harsh industrial environments. This paper addresses the need for a more robust and reliable sensing solution that can operate effectively in the presence of electromagnetic noise.

Methods

The core of the proposed system involves two Fiber Bragg Gratings (FBGs) strategically placed on the surface of the rotating shaft at a ±45° angle relative to the axial direction. These FBGs are illuminated by a Super Luminescent Light Emitting Diode (SLED), and their reflected wavelengths are monitored by a high-speed demodulator. The system leverages the principle that FBGs are sensitive to strain, and torque induces strain on the shaft. Specifically, the authors derive theoretical relationships between the torque, torsion angle, and the difference in the central wavelengths of the two FBGs. This difference is then analyzed into a "DC" component (representing static torque) and a harmonic "AC" component (representing vibrations).

Datasets

Not discussed in the paper. The paper focuses on experimental validation using a custom-built setup.

Key Insights and Ideas

  • Dual FBG Approach for Torque and Torsion: Using two FBGs at ±45° allows for the decoupling of strain components, enabling the measurement of both torque and torsion angle.
  • Wavelength Difference as a Key Metric: The difference in the reflected wavelengths of the two FBGs proves to be a sensitive indicator of strain, and thus torque and torsion.
  • Decomposition into DC and AC Components: Separating the wavelength difference into static ("DC") and dynamic ("AC") parts allows for the simultaneous monitoring of steady-state torque and vibrational torques.
  • Vibration Frequency Correlation: The frequency of the "AC" component of the wavelength difference directly correlates with the rotation speed of the shaft, indicating the presence of torsional vibrations.
  • Immunity to Electromagnetic Interference: As an optical sensing method, FBGs inherently offer immunity to electromagnetic interference, a significant advantage over electrical sensors.

Key Results

The experimental results demonstrate a strong correlation between the measured wavelength difference and the applied torque. The "DC" component of the wavelength difference showed a linear relationship with the driving torque, with a measured sensitivity of approximately 7.684 pm/Nm. The "AC" component's vibration frequency was found to be directly proportional to the shaft's rotation speed, confirming its utility in monitoring rotational dynamics. The authors also noted that the measured data were in good agreement with their theoretical analysis.

Limitations and Future Work

The authors acknowledge that deviations in the experimental results from theoretical predictions can arise from two main factors:

  • FBG Placement Accuracy: The FBGs may not be perfectly aligned at the ±45° direction.
  • Torque Control Error: Inaccuracies in the current controlling the magnetic powder brake can lead to errors in the applied torque.

Future work could focus on improving the precision of FBG placement and exploring more advanced signal processing techniques to further enhance the accuracy and robustness of the system. Additionally, investigating the system's performance under more complex loading conditions and in a wider range of industrial environments would be valuable.

Summary updated

BibTeX
@article{wang2016two,
  author = {Yong-Jiao Wang and Lei Liang and Yin-Quan Yuan and Gang Xu and Fang Liu},
  title = {{A Two Fiber Bragg Gratings Sensing System to Monitor the Torque of Rotating Shaft}},
  journal = {Sensors},
  year = {2016},
  doi = {10.3390/s16010138},
}
Figure