Damage and Failure Monitoring of Aerospace Insulation Layers Based on Embedded Fiber Bragg Grating Sensors

Guang Yan, Bao-Fei Wan, Heng Huang, Wuyi LiPolymers 2024 · DOI

TL;DR

This paper demonstrates that embedded Fiber Bragg Grating (FBG) sensors can reliably monitor damage and failure in aerospace insulation layers made of carbon fiber-reinforced polymers (CFRP). Even after significant degradation from high temperatures, FBG sensors accurately tracked strain changes, offering a promising solution for real-time structural health monitoring of critical aircraft components.

What Problem Does This Paper Address?

Aerospace insulation layers, often made from CFRP composites, are vital for protecting aircraft from extreme temperatures and pressures. However, these materials are susceptible to damage from factors like vibrations, impacts, and thermal cycling, which can lead to fatigue, microcracking, and reduced performance. Detecting and monitoring this damage in real-time is crucial for ensuring aircraft safety and reliability. While FBG sensors are known for their sensitivity and durability, their effectiveness in monitoring CFRP insulation layers under complex, high-temperature aerospace conditions, especially after material degradation, needed further investigation.

Methods

The study employed a two-pronged approach:

  • Finite Element Analysis (FEA): The researchers used ABAQUS to simulate the damage evolution of CFRP laminated plates under axial tensile loads and their thermal decomposition behavior at high temperatures. This involved implementing the 3D Hashin failure criterion to predict damage modes and using a UMATHT subroutine to model thermal decomposition.
  • Experimental Validation: CFRP laminated plates with embedded FBG sensors were fabricated.
  • Tensile Tests: Specimen 1 underwent axial tensile loading to simulate ground conditions. FBG sensors monitored internal strain changes from elastic deformation to fracture. A separate specimen (Specimen 3) without FBG sensors was tested to assess the impact of sensor embedding on tensile strength.
  • High-Temperature Sintering and Tensile Tests: Specimen 2 was subjected to high-temperature treatment (up to 650 °C) to simulate extreme aerospace environments. Subsequently, it underwent tensile fracture testing to evaluate the FBG sensors' performance after thermal degradation.

Datasets

Not discussed in the paper. The study focuses on simulation and experimental data generated from fabricated specimens.

Key Insights and Ideas

  • FBGs as reliable damage indicators: FBG sensors accurately captured the entire damage progression in CFRP, from initial elastic deformation to microcracking, delamination, and final brittle fracture, mirroring FEA predictions.
  • High-temperature resilience: Even after significant material degradation (75% reduction in tensile strength) due to high-temperature exposure, FBG sensors remained functional and continued to provide real-time strain monitoring, demonstrating their robustness.
  • Damage evolution tracking: The study showed that FBG sensors could differentiate between various damage mechanisms, such as matrix cracking and fiber tensile failure, by analyzing wavelength shifts and waveform changes (like chirping).
  • Minimal impact of FBG embedding: The tensile strength of CFRP laminates with embedded FBG sensors was only slightly reduced (3.06%) compared to those without sensors, indicating that the embedding process has a minimal detrimental effect on structural integrity.

Key Results

  • Tensile Tests (Specimen 1): FBG sensors accurately monitored strain changes throughout the tensile loading process, correlating well with FEA predictions. The ultimate load predicted by FEA was 11,432 N, with an experimental result of 10,530 N (8.5% error).
  • High-Temperature Treatment (Specimen 2): After exposure to 650 °C, the tensile strength of the CFRP laminate decreased significantly by 75%. Despite this degradation, FBG sensors continued to monitor strain changes, showing a linear relationship with load at lower levels and deviating non-linearly as internal damage accumulated, ultimately capturing the brittle fracture at a much lower load (2 kN) compared to the untreated specimen.
  • FBG Sensor Stability: The FBG sensors demonstrated excellent stability and reliability, with wavelength variations being nearly identical across repeated calibration tests.

Limitations and Future Work

  • Limitations:
    • FBG sensors require calibration before use.
  • Temperature compensation is necessary for accurate strain measurements when both temperature and strain effects are present.
  • Potential for creep and long-term stability of the sensors needs further verification.
  • Future Work:
    • Investigating the nonlinear relationship between internal strain (measured by FBG) and surface strain in laminated panels.
  • Further research into the long-term application potential of FBG sensors for monitoring aviation thermal insulation layers.

Summary updated

Abstract

Carbon fiber-reinforced polymer (CFRP) composites are widely used in aviation thermal insulation layers due to their high strength-to-weight ratio and excellent high-temperature performance. However, challenges remain regarding their structural integrity and durability under extreme conditions. This study first employed finite element simulation to model the damage evolution of CFRP laminated plates under axial tensile loads and their thermal decomposition behavior in high-temperature environments, providing a theoretical reference. Subsequently, experimental research was conducted on CFRP laminated plates embedded with fiber Bragg grating (FBG) sensors. In the tensile tests, FBG sensors accurately monitored the entire process from elastic deformation to damage propagation and eventual failure. In the high-temperature tests, despite a 75% reduction in tensile strength, FBG sensors effectively monitored damage evolution. Conclusively, the results demonstrate that FBG sensors possess reliable monitoring capabilities under complex conditions, making them a promising solution for the long-term structural health monitoring of aviation thermal insulation materials and paving the way for future developments in this area.
BibTeX
@inproceedings{yan2024damage,
  author = {Guang Yan and Bao-Fei Wan and Heng Huang and Wuyi Li},
  title = {{Damage and Failure Monitoring of Aerospace Insulation Layers Based on Embedded Fiber Bragg Grating Sensors}},
  booktitle = {Polymers},
  year = {2024},
  doi = {10.3390/polym16243543},
}
Figure