Uplink Achievable Rate Maximization for Reconfigurable Intelligent Surface Aided Millimeter Wave Systems with Resolution-Adaptive ADCs

Yue Xiu, Jun Zhao, Ertuğrul Başar, Marco Di Renzo, Wei Sun, Guan Gui, Ning Wei

Abstract: In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bits, the RIS phase shifts, and the beam selection matrix. Due to the non-convexity of the feasible set and objective function, the formulated problem is non-convex and difficult to solve. To efficiently tackle this problem, a block coordinated descent (BCD)-based algorithm is proposed. Simulations demonstrate that an RIS can mitigate the hardware loss due to use of RADCs, and that the proposed BCD-based algorithm outperforms state-of-the-art algorithms.

Introduction

Millimeter-wave (mmWave) frequencies are a cornerstone of next-generation wireless systems, offering vast bandwidth. However, their short wavelengths make them highly susceptible to blockages from buildings or foliage. To maintain reliable links, massive antenna arrays are used to form directional beams. A significant challenge in this setup is the hardware cost and power consumption at the Access Point (AP). Specifically, high-resolution Analog-to-Digital Converters (ADCs) consume power exponentially relative to their bit-depth. This research explores a novel solution: combining Reconfigurable Intelligent Surfaces (RIS) with resolution-adaptive ADCs (RADCs) to maintain high data rates while significantly reducing power overhead.

System Model and Problem Formulation

The study considers a multi-user uplink scenario where several users transmit signals to an AP. As shown in Figure 1, the direct path between users and the AP may be obstructed by physical obstacles. An RIS—a "smart mirror" composed of many passive reflecting elements—is deployed to create an alternative, high-quality propagation path.

Uplink RIS-aided mmWave multi-user system model with an obstacle blocking the direct path.

The AP is equipped with a massive antenna array but a limited number of RF chains, each connected to an RADC. The goal is to maximize the achievable sum rate by jointly optimizing four critical variables: the quantization bits for each ADC, the beam selection matrix at the AP, the phase shifts of the RIS elements, and the digital decoding vectors.

Proposed Optimization Framework

The resulting optimization problem is highly non-convex due to the discrete nature of bit allocation and the unit-modulus constraints of the RIS phase shifts. To solve this, the authors propose a Block Coordinated Descent (BCD)-based algorithm. This iterative approach decomposes the complex problem into manageable sub-problems:

  • Successive Convex Approximation (SCA): Used to handle the tricky discrete bit-allocation and beam selection.
  • Majorize-Minimization (MM): Employed to optimize the decoding vectors.
  • Manifold Optimization (MO): Used to solve for the RIS phase shifts, ensuring they stay within the physical limits of the hardware.

Performance Evaluation and Key Results

Numerical simulations using a geometric mmWave channel model highlight the RIS's role as a "hardware loss mitigator." By intelligently reflecting signals, the RIS compensates for the quantization noise introduced by low-resolution ADCs.

Achievable sum rate versus the number of RIS reflecting elements ($N_r$).

As illustrated in Figure 4, the proposed BCD-based algorithm significantly outperforms existing state-of-the-art (SOTA) methods like SHC-MO and MMSQE-BA-MO. Key findings include:

  • Superior Scaling: The achievable sum rate increases significantly as the number of RIS reflecting elements ($N_r$) increases, proving that adding passive elements to the environment is a viable alternative to adding power-hungry active components to the base station.
  • The 8-bit Benchmark: Simulations show that an RIS-aided system with adaptive low-resolution ADCs can match the performance of a standard system (without RIS) using high-resolution 8-bit ADCs.
  • Rapid Convergence: Despite the complexity of the joint optimization, the BCD algorithm typically converges within 10 iterations, making it computationally feasible for practical deployment.

Conclusion and Future Work

This research demonstrates that RIS technology can effectively offset the performance degradation caused by energy-efficient, low-resolution hardware in mmWave systems. While the results are promising, the study assumes perfect Channel State Information (CSI) and a static environment. Future work must address the challenges of channel estimation for passive RIS elements and the impact of high-mobility users in wideband (OFDM) systems standard in 5G and 6G.

Summary updated

Abstract

In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bits, the RIS phase shifts, and the beam selection matrix. Due to the non-convexity of the feasible set and objective function, the formulated problem is non-convex and difficult to solve. To efficiently tackle this problem, a block coordinated descent (BCD)-based algorithm is proposed. Simulations demonstrate that an RIS can mitigate the hardware loss due to use of RADCs, and that the proposed BCD-based algorithm outperforms state-of-the-art algorithms.
BibTeX
@article{xiu2021uplink,
  author = {Yue Xiu and Jun Zhao and Ertuğrul Başar and Marco Di Renzo and Wei Sun and Guan Gui and Ning Wei},
  title = {{Uplink Achievable Rate Maximization for Reconfigurable Intelligent Surface Aided Millimeter Wave Systems with Resolution-Adaptive ADCs}},
  journal = {IEEE Wireless Communications Letters},
  year = {2021},
  url = {https://openreview.net/forum?id=jIkVO5T6KE},
}
Figure