Cascaded Channel Estimation for Reconfigurable Intelligent Surfaces

255 concepts186 papers2 proposals

Reconfigurable Intelligent Surfaces (RIS)—also referred to as Intelligent Reflecting Surfaces (IRS) or Large Intelligent Surfaces (LIS)—promise to transform wireless communications by turning the environment into a programmable asset. By adjusting the phase shifts of thousands of passive electromagnetic elements, an RIS can steer signals around obstacles, suppress interference, and drastically improve energy efficiency.

However, a fundamental catch prevents these theoretical gains from being easily realized: passive surfaces are completely blind.

The Challenge of Passive Blindness

In traditional wireless networks, estimating the channel state information (CSI) is straightforward. Active nodes (like a base station or a smartphone) possess radio frequency (RF) chains that allow them to transmit and receive known pilot signals. By analyzing these pilots, the receiver can calculate exactly how the environment distorts the signal.

An RIS, by design, is passive. As noted by Chongwen Huang et al. in Energy Efficient Multi-User MISO Communication using Low Resolution Large Intelligent Surfaces, these surfaces lack active RF chains to save power and hardware costs. They cannot transmit their own pilots, nor can they process incoming signals. This architectural constraint creates what Xiaojun Yuan 0002 terms a "sensing blindness" in Reconfigurable-Intelligent-Surface Empowered Wireless Communications: Challenges and Opportunities. Without active components, the base station cannot directly measure the link between itself and the surface, nor the link between the surface and the user.

The Cascaded Channel Bottleneck

Because the intermediate surface cannot assist in the measurement process, the system can only observe an end-to-end composite path. The signal travels from the base station, reflects off the RIS elements, and arrives at the user. Mathematically, this creates a cascaded channel.

Instead of estimating a simple vector or matrix, the receiver must estimate a multiplicative combination of two distinct wireless links. As Zhen Qin et al. demonstrate in Optimal Error Analysis of Channel Estimation for IRS-assisted MIMO Systems, this high-dimensional structure couples the individual channel components together.

[Base Station] ---> (Link G) ---> [ Passive RIS ] ---> (Link F) ---> [User]
       \                                                               /
        +------------------ (Observed Cascaded Channel: G * F) -------+

If a base station has $M$ antennas and the RIS has $N$ elements, a naive approach to measuring every single reflection path independently causes the required training time (pilot overhead) to scale catastrophically. As the number of elements $N$ grows into the hundreds or thousands to achieve high beamforming gains, the time spent sending pilot signals can completely consume the available coherence time. This leaves no room for actual data transmission, creating a severe communication bottleneck (Qurrat-Ul-Ain Nadeem et al. in Opportunistic Beamforming Using an Intelligent Reflecting Surface Without Instantaneous CSI).

To make RIS technology viable, researchers have developed clever signal processing frameworks to untangle this multiplicative knot without adding power-hungry hardware to the surface.

Decoupling via Tensor and Matrix Factorization

The key to solving the cascaded channel problem lies in exploiting structural redundancies. The individual links within the cascaded channel are not entirely independent:

  1. Quasi-static infrastructure: The link between the base station and the RIS is typically fixed because both nodes are deployed at permanent physical locations. It changes much slower than the link between the RIS and a mobile user.
  2. Shared channels: In a multi-user system, every single user shares the exact same physical link from the base station to the RIS.

By leveraging these properties, the multiplicative channel can be structured as an algebraic tensor or a low-rank matrix, allowing researchers to apply factorization techniques.

For example, Chongwen Huang et al. introduced a framework in Channel Estimation for RIS-Empowered Multi-User MISO Wireless Communications based on PARAFAC tensor decomposition. By systematically varying the RIS phase-shift patterns over multiple time slots, the received signals across users, subcarriers, and time can be stacked into a multi-dimensional tensor. Because of the shared base-station-to-RIS link, this tensor can be uniquely decomposed using iterative algorithms like Alternating Least Squares (ALS). This allows the system to isolate the individual channel components with significantly lower pilot overhead than traditional methods.

  Time Slots (Phase Patterns)
         /_/_/_/_/|
        /_/_/_/_/ |  == [Tensor Decomposition] ==> Separated Links:
        /_/_/_/_/ /                                1. BS-to-RIS (Static)
        |_______|/                                 2. RIS-to-User (Dynamic)
     Users / Antennas

When the wireless environment features strong line-of-sight paths, the channel matrices inherently exhibit a low-rank structure. Wei Zhang et al. exploited this in Cost-Efficient RIS-Aided Channel Estimation via Rank-One Matrix Factorization, proving that the estimation problem can be reformulated as a rank-one matrix factorization. This insight slashes the required training overhead from a multiplicative scaling ($M \times N$) down to a linear scaling ($M$). Similarly, the authors of Matrix-Calibration-Based Cascaded Channel Estimation for Reconfigurable Intelligent Surface Assisted Multiuser MIMO utilized message-passing algorithms to calibrate and infer these underlying matrix factors from indirect, noisy observations.

Exploiting Physical Sparsity and Spatial Correlation

Another angle of attack relies on the physical geometry of high-frequency bands, such as millimeter-wave (mmWave) and Terahertz communications. Signals at these frequencies do not scatter randomly; instead, they travel along a highly restricted number of physical paths.

In Broadband Channel Estimation for Intelligent Reflecting Surface Aided mmWave Massive MIMO Systems, Ziwei Wan et al. leveraged this angular sparsity through compressive sensing. Because the physical position of the RIS is fixed and known, the dictionary of potential angles of arrival and departure is highly constrained. By framing channel estimation as a sparse recovery problem, the full broadband channel can be accurately reconstructed using only a small fraction of random measurements.

Furthermore, because the thousands of reflective elements on an RIS are packed tightly together, their channel coefficients are highly correlated in space. Shatakshi Singh et al. capitalized on this spatial correlation in Channel Estimation for Intelligent Reflecting Surface Aided Communication via Graph Transformer. By grouping adjacent elements into correlated clusters and processing the network as a graph, a deep learning architecture can observe a tiny subset of elements and accurately predict the channel states for the remaining unmeasured surface elements.

Bypassing Instantaneous Estimation Entirely

When the environment changes too rapidly—such as in high-mobility vehicular scenarios—even optimized cascaded estimation techniques can struggle to keep up with the overhead. This has led to a parallel paradigm shift: designing systems that do not require instantaneous CSI at all.

Instead of tracking microsecond-level phase fluctuations, the system can optimize the RIS based on long-term statistical channel knowledge, such as spatial correlation matrices and average angles of arrival. Sadaf Syed et al. demonstrated in Design of a Single-User RIS-Aided MISO System Based on Statistical Channel Knowledge that statistical optimization can achieve near-optimal beamforming performance while completely removing the real-time pilot overhead.

Taking this to its logical conclusion, Wenhai Lai et al. proposed a "blind" passive beamforming strategy in Blind Passive Beamforming for MIMO System. By treating the RIS phase configuration as a black-box optimization problem and using random samples of received signal power as feedback, the system iteratively converges on an optimal reflection pattern, bypassing the mathematical headache of cascaded channel estimation entirely.

History & citationVersion 2 · 2026-10-04

Current · Permanent link

  1. Version 2 (latest) · 2026-10-04 · 190 papers
  2. Version 1 · 2026-10-04 · 241 papers
Cite this direction

Latest version (a living page):

@misc{lacuna_passive_channel_state_estimation_bcd575c4,
  title = {passive channel state estimation},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/passive-channel-state-estimation/rdr_bcd575c45db742bd8289a7423fcff639},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-21},
}

This exact version (version 2, frozen text):

@misc{lacuna_passive_channel_state_estimation_bcd575c4_v2,
  title = {passive channel state estimation},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/passive-channel-state-estimation/rdr_bcd575c45db742bd8289a7423fcff639/v/2},
  note = {Version 2, frozen 2026-10-04. Accessed 2026-11-21},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake