Introduction
Physical Unclonable Functions (PUFs) serve as the digital DNA of silicon chips, enabling secure device authentication and secret key generation. Despite their utility, conventional PUF designs—such as those based on ring oscillators or SRAM—face significant challenges regarding long-term reliability due to transistor aging, high power requirements, and sensitivity to environmental noise. This paper proposes TV-PUF, a novel architecture that leverages manufacturing variations in transistor threshold voltages ($V_{th}$) to create a robust and efficient hardware security primitive.
The Challenge of Aging and Efficiency
Traditional PUFs often rely on PMOS transistors, which are highly susceptible to Negative-Bias Temperature Instability (NBTI). Over years of operation, NBTI causes threshold voltage shifts that can lead to bit-flip errors, effectively causing the PUF to "forget" its unique identity. Furthermore, many existing designs require significant silicon area and power, limiting their deployment in low-power Internet of Things (IoT) devices.
Proposed TV-PUF Architecture
The core innovation of TV-PUF lies in its use of cascaded NMOS pass transistors to amplify process variations.
Cascaded NMOS Design
By cascading NMOS transistors in series, the design amplifies the impact of $V_{th}$ variations on the final output voltage. For a cascade of $n$ transistors, the output voltage is approximately $V_{DD} - n \cdot V_{th}$. This amplification makes the unique hardware signature more distinguishable from background noise.
System Integration
The full TV-PUF architecture utilizes a differential comparison scheme. A 6-to-64 decoder selects two blocks from an array of 128 identical units. The output voltages ($V_1$ and $V_2$) are compared by a static voltage sense amplifier to produce a stable output bit.
To ensure reliability, the design incorporates "flush transistors" ($F_a$ and $F_b$) that reset internal nodes to ground after each operation. This prevents "memory effects" where previous states influence current responses. Crucially, the NMOS-only signal path avoids NBTI-induced aging, ensuring that while absolute $V_{th}$ may shift, the relative difference between paths remains stable.
Experimental Results
Evaluated using HSpice simulations across 45nm, 65nm, and 90nm technology nodes, TV-PUF demonstrated exceptional performance:
- Security Metrics: Achieved a uniqueness of ~51% and uniformity of ~50%, nearly matching the ideal 50% for both metrics.
- Speed and Power: The design supports clock speeds up to 1 GHz with a latency of approximately 100 ps. It consumes only 0.18 $\mu$W/bit, with an energy per cycle of $1.81 \times 10^{-3}$ pJ—orders of magnitude lower than sub-threshold alternatives.
- Area Efficiency: A 1-bit generation circuit requires only 586 transistors, a nearly 3x reduction compared to competing designs.
Conclusion
TV-PUF addresses the critical trade-offs between security, reliability, and efficiency in hardware primitives. By focusing on the relative stability of threshold voltage differences in an NMOS-only architecture, it provides an aging-resistant solution suitable for high-speed, low-power cryptographic applications.
Summary updated