Abstract
Shock waves generated by the explosion of gases or explosives contain a great deal of energy. It will decrease in its quantity as traveling further from the explosion source. In the present investigation studies have been carried out on the phenomena of the decreasing process of shock wave as its object. Experiments were done in a small test gallery, whose diameter, length and wall thickness are 450mm, 10m and 6mm, respectively. Setting No.3 Kiri-dynamite on the corner cutting mortar, test blastings were practiced several times. The shape of angled mortar is 120mm in diameter and 1m in length having 5×5cm right angle notch in its direction of axis. Blastings were always executed towards the exit of gallery. The velocity of shock wave is obtained by measuring the arrival time of shock wave to each measuring point. The pressure of shock wave was calculated from the velocity. As a result of the present study, it is concluded that pressure (P), velocity of shock wave (V) and its traveling time (t) are the functions of distance (R). Namely, the incident pressure P (atm) has a relation of $P=k_1/R^{2/3}$, the velocity V (m/msec) $V=k_2/R^{1/3}$ and traveling time t (msec) $t=k_3 \cdot R^{4/3}$, where coefficient $k_1, k_2$ and $k_3$ are bound as $k_1 \propto k_2^{-2} \propto k_2^{-3}$. R is the distance between measuring & blasting point.
Introduction
In underground coal mining, explosions present a multi-faceted threat. Beyond the immediate flame and debris, the resulting shock wave carries immense energy over long distances. When this wave encounters a wall or a dead end in a confined tunnel, it undergoes reflection and adiabatic compression, creating localized zones of extreme temperature and pressure. This "thermal effect" can ignite flammable methane gas mixtures even in areas untouched by the initial fire. This study, originally published in the Journal of the Mining and Metallurgical Institute of Japan (1983), seeks to quantify the decay of shock wave velocity and pressure in a confined cylindrical gallery to better define safety zones.
Experimental Methodology
The researchers constructed a "mini-gallery" to simulate a mine tunnel, consisting of a steel cylinder 10 meters long with an internal diameter of 450 mm. The explosive source was 150 grams of "No. 3 Kiri-dynamite" placed in a grooved steel mortar at one end of the gallery.
Instrumentation included ion gaps to measure initial detonation velocity and custom-built shock wave switches placed at intervals from 1m to 9m along the tube. These sensors consisted of thin (0.2mm) copper plates that closed an electrical circuit upon impact by the pressure front. Two experimental sets were conducted: the first focused on the initial 3 meters to capture high-energy dynamics, while the second extended measurements to 9 meters to observe long-distance decay.
Results and Empirical Findings
The dynamite detonated at an average velocity of 5,260 m/s. By recording the exact arrival time ($t$) at each distance ($R$), the researchers used least-squares regression to derive empirical power-law relationships for the wave's behavior.
The study established that the physical properties of the wave follow consistent functions of distance:
- Pressure ($P$): Decays proportional to $R^{-2/3}$.
- Velocity ($V$): Decays proportional to $R^{-1/3}$.
- Arrival Time ($t$): Increases proportional to $R^{4/3}$.
These empirical results showed high correlation with standard thermodynamic shock wave equations (Mach number calculations), validating that simple arrival-time measurements are a reliable method for estimating complex pressure and temperature variables in the field.
Discussion and Safety Implications
The cylindrical geometry of the gallery is a critical factor; because it constrains the wave, energy dissipates more slowly than in an open-air spherical explosion. The rapid adiabatic compression at the wave front can raise air temperatures to the ignition point of methane without direct contact with the original blast flame.
While the specific constants ($k_1, k_2, k_3$) would vary with the diameter of an actual mine tunnel (typically ~1.8m), the established power-law trends provide a foundational model for predicting danger zones. This research highlights that the mechanical force of a blast is inseparable from its potential to trigger secondary thermal disasters through air compression.
Conclusion
This investigation successfully quantified the decreasing process of shock waves in a confined space. The derived formulas $P \propto R^{-2/3}$ and $V \propto R^{-1/3}$ offer a practical framework for mine safety engineers to estimate the reach and intensity of explosive energy, facilitating more robust safety protocols in underground environments.
Summary updated