Reliability Analysis of Diesel Engine Connecting Rod Threaded Connection Based on ANSYS

Fengyan Hu, Qiang He, Bofeng Fu, Ming Zhao, Ming–Hsuan YangJournal of Physics Conference Series 2023 · DOI

Abstract

The connecting rod bolt is a critical component of the diesel engine crank connecting rod mechanism. Due to the inherent characteristics of threaded connections, stress concentration frequently occurs at the threads during operation. To improve the quality and reliability of these connections, this study performs numerical simulations of the big end threaded structure using ANSYS finite element analysis software. By combining theoretical analysis with numerical simulation, we analyze the impact of thread pitch, connection length, and bolt preload on stress distribution. The results provide significant engineering value for optimizing bolt geometry and ensuring the safe operation of diesel engine components.

Introduction

In a diesel engine, the connecting rod serves as the vital link translating the linear motion of the piston into the rotational power of the crankshaft. The bolts securing the "big end" of this rod are subjected to immense, alternating stresses. Because of the complex geometry of screw threads, stress is rarely distributed evenly; it tends to concentrate in specific regions, particularly at the thread roots. Failure of these bolts often leads to catastrophic engine damage. While traditional engineering formulas provide a baseline, they often oversimplify the interactions within a joint. This paper utilizes Finite Element Analysis (FEA) to provide a granular understanding of how specific design choices influence structural integrity.

Methodology

The research employed a hybrid approach, integrating theoretical mechanics with modern numerical simulation. A 3D model of a standard diesel engine connecting rod bolt (Performance Level 10.9 steel) was developed in SolidWorks and imported into ANSYS Workbench for static structural analysis.

To balance accuracy with computational efficiency, a multi-scale meshing strategy was used: a general 1mm mesh for the bolt body and a refined 0.25mm mesh at the threaded joints where stress concentration is most prevalent. The simulation evaluated two primary states: the initial preload condition (tightening) and the maximum tensile condition (tightening plus peak inertial forces during engine operation).

Theoretical force-displacement diagram used to model the relationship between bolt preload and external loading.

Key Insights and Ideas

The "First Thread" Bottleneck

The simulation confirmed that the vast majority of stress occurs at the very first thread engagement point. As the load moves further into the nut or threaded hole, stress levels drop significantly. This confirms why the transition zone of a bolt is almost universally the point of failure in high-stress applications.

The Preload Paradox

Counter-intuitively, the study found that increasing bolt preload (pretension) actually improves joint reliability. While one might expect a tighter bolt to snap more easily under additional load, a higher preload reduces the interval of stress concentration and improves the bearing ratio. Essentially, a properly pretensioned bolt behaves more like a single solid unit with the rod, minimizing the relative "tugging" on individual thread roots.

Geometric Optimization

  • Engagement Length: The study found diminishing returns for connection length. While a short connection (4.5mm) showed dangerously high stress (500–700 MPa), increasing the length beyond 12mm yielded only marginal improvements. This identifies a "sweet spot" for engagement that maximizes safety without adding unnecessary weight.
  • Pitch Sensitivity: Increasing the thread pitch expands the zone of stress concentration. While larger threads are more robust against stripping, they alter the stress gradient in the bolt core, requiring careful balancing during the design phase.

Key Results

Under peak operating conditions, the maximum Von Mises stress was calculated at approximately 902.14 MPa, localized at the first stage thread. As shown in the FEA results, the stress distribution is highly sensitive to the initial pretension and the specific geometry of the engagement zone.

FEA simulation results illustrating the stress distribution across the bolt body and the intense concentration at the threaded interface.

Conclusion

This numerical analysis successfully pinpoints the critical stress zones in diesel engine connecting rod bolts. The findings suggest that optimizing preload and maintaining a specific engagement length are more effective for reliability than simply increasing bolt size. While this static analysis provides a vital baseline, future work should incorporate dynamic factors such as high-frequency vibration and thermal expansion to further refine these reliability models.

Summary updated

Abstract

Abstract Connecting rod bolt is the key component of the diesel engine crank connecting rod mechanism, and the phenomenon of stress concentration at the thread easily occurs in the working process of the crank connecting rod, due to the characteristics of the threaded connection. In order to improve the quality of the threaded connection of the diesel engine connecting rod, the connecting rod’s big end threaded connection structure is numerically simulated based on ANSYS finite element analysis software through the combination of theoretical analysis and numerical simulation. The stress distribution of different pitches, threaded connection length and bolt preload are analyzed, and the effects of different factors on the strength of threaded connection structure are obtained. The research results have important engineering application value for improving the reliability of the threaded connection and ensuring the safe operation of the diesel engine connecting rod mechanism.
BibTeX
@article{hu2023reliability,
  author = {Fengyan Hu and Qiang He and Bofeng Fu and Ming Zhao and Ming–Hsuan Yang},
  title = {{Reliability Analysis of Diesel Engine Connecting Rod Threaded Connection Based on ANSYS}},
  journal = {Journal of Physics Conference Series},
  year = {2023},
  doi = {10.1088/1742-6596/2459/1/012095},
}
Figure