Large Intelligent Surface/Antennas (LISA) Assisted Symbiotic Radio for IoT Communications

Qianqian Zhang, Ying‐Chang Liang, H. Vincent Poor

Abstract

To support super-massive access for future wireless communications, in this paper, we propose a novel large intelligent surface/antennas (LISA)-assisted symbiotic radio (SR) system in which a LISA, operating as an Internet-of-Things (IoT) device, transmits messages to an IoT receiver (IR) by using reflecting radio technique, and at the same time, it assists the primary transmission from a base station (BS) to a primary receiver (PR) by intelligently reconfiguring the wireless environment. We are interested in the joint design for active transmit beamforming at BS and passive reflecting beamforming at LISA to minimize the total transmit power at BS, subject to the signal-to-noise-ratio (SNR) constraint for the IoT communication and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, for the general case, we decouple the original optimization problem into a series of subproblems using the alternating optimization method and solve them one by one based on KarushKuhnTucker (KKT) conditions and projection method. For the special case in which the direct links from BS to PR and IR are blocked, we decouple the formulated optimization problem into two subproblems, one of which is a semi-definite program (SDP) problem and the other is solved by using semi-definite relaxation (SDR) technique. The convergence performance and the computational complexity of the proposed algorithms are analyzed for both cases. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system.

Introduction

As we move toward 6G, the "super-massive" number of Internet-of-Things (IoT) devices creates two major challenges: spectrum scarcity and high power consumption. Ambient Backscatter Communication (AmBC)—where IoT devices "hitchhike" on existing RF signals—is a promising solution, but it often suffers from the "double fading" effect, leading to very weak signals at the receiver. While Symbiotic Radio (SR) improves on this by creating a mutualistic relationship between primary and IoT transmissions, the performance gains for the primary system are often marginal. This paper addresses these weaknesses by integrating a Large Intelligent Surface/Antennas (LISA), also known as an Intelligent Reflecting Surface (IRS).

System Model

System model of the LISA-assisted symbiotic radio system. Source, p. 5

System model of the LISA-assisted symbiotic radio system.

The proposed framework involves a Base Station (BS) transmitting to a Primary Receiver (PR). Simultaneously, a LISA acts as an IoT device, transmitting its own binary messages to an IoT Receiver (IR) by modulating the reflected signal. Crucially, the LISA also reconfigures the wireless environment to assist the primary transmission, creating a symbiotic relationship where the IoT transmission and primary transmission mutually benefit from the joint beamforming design.

Optimization Methodology

The core challenge lies in the complex, non-convex optimization required to coordinate active beamforming at the BS with passive reflecting beamforming at the LISA. The authors formulate a power minimization problem aimed at reducing the BS's transmit power while ensuring the primary user meets its data rate requirements and the IoT receiver meets its Signal-to-Noise Ratio (SNR) threshold.

To solve this, they employ several key techniques:

  • Alternating Optimization (AO): Decoupling the problem into smaller subproblems to solve for variables iteratively.
  • KKT Conditions & Projection: Handling the unit-modulus constraints of the LISA elements, which can only change phase, not amplitude.
  • SDP/SDR for Special Cases: In scenarios where direct line-of-sight links are blocked, the problem is simplified into a Semi-Definite Program (SDP) and solved using Semi-Definite Relaxation (SDR).

Key Insights and System Performance

3D and contour radiation patterns of the LISA. Source, p. 8

3D and contour radiation patterns of the LISA.

The LISA functions as more than a passive mirror; it is an active participant in the communication link. By subtly changing its reflection coefficients, it modulates the primary signal to carry its own data. This "mutualistic beamforming" focuses the primary signal toward the PR, which can actually reduce the power the BS needs to output compared to traditional systems.

Simulation results demonstrate several key findings:

  • Power Efficiency: Joint optimization significantly outperforms benchmarks. With 100 reflecting elements, the minimum transmit power required is substantially lower than traditional setups.
  • Robustness: The system remains highly effective even when direct paths from the BS are blocked, as the LISA creates high-quality virtual links.
  • Scaling Laws: Required transmit power decreases significantly as the number of reflecting elements on the LISA increases, highlighting the efficiency of large-scale surfaces.
  • Convergence: The proposed AO algorithm is computationally efficient, typically converging within 4 to 5 iterations.

Conclusion and Future Work

This framework demonstrates that integrating LISA into symbiotic radio systems can effectively support massive IoT access with high power efficiency. However, several practical challenges remain. The current study assumes perfect Channel State Information (CSI), which is difficult to obtain for large passive surfaces. Future research should explore multi-user interference scenarios (MIMO-NOMA) and the impact of hardware constraints, such as discrete, quantized phase shifts.

Summary updated

Abstract

To support super-massive access for future wireless communications, in this paper, we propose a novel large intelligent surface/antennas (LISA)-assisted symbiotic radio (SR) system in which a LISA, operating as an Internet-of-Things (IoT) device, transmits messages to an IoT receiver (IR) by using reflecting radio technique, and at the same time, it assists the primary transmission from a base station (BS) to a primary receiver (PR) by intelligently reconfiguring the wireless environment. We are interested in the joint design for active transmit beamforming at BS and passive reflecting beamforming at LISA to minimize the total transmit power at BS, subject to the signal-to-noise-ratio (SNR) constraint for the IoT communication and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, for the general case, we decouple the original optimization problem into a series of subproblems using the alternating optimization method and solve them one by one based on KarushKuhnTucker (KKT) conditions and projection method. For the special case in which the direct links from BS to PR and IR are blocked, we decouple the formulated optimization problem into two subproblems, one of which is a semi-definite program (SDP) problem and the other is solved by using semi-definite relaxation (SDR) technique. The convergence performance and the computational complexity of the proposed algorithms are analyzed for both cases. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system.
BibTeX
@article{zhang2021large,
  author = {Qianqian Zhang and Ying‐Chang Liang and H. Vincent Poor},
  title = {{Large Intelligent Surface/Antennas (LISA) Assisted Symbiotic Radio for IoT Communications}},
  journal = {IEEE Trans. Communications},
  year = {2021},
  doi = {10.1109/tcomm.2021.3070043},
}
Figure