Reconfigurable Intelligent Surface Assisted MIMO Symbiotic Radio Networks

Qianqian Zhang, Ying-Chang Liang, H. Vincent Poor

TL;DR

This paper proposes a "symbiotic" wireless system where a Reconfigurable Intelligent Surface (RIS) pulls double duty: it acts as a secondary transmitter to send its own data via backscatter while simultaneously boosting the signal for a primary MIMO transmission. By jointly optimizing active and passive beamforming, the authors demonstrate that 6G networks can achieve significantly higher energy efficiency and better coverage, even when the direct line-of-sight is blocked.

What Problem Does This Paper Address?

As we move toward 6G, the demand for massive connectivity and ultra-high data rates is skyrocketing. Two emerging technologies aim to solve this: Symbiotic Radio (SR) and Reconfigurable Intelligent Surfaces (RIS).

In SR, a secondary, low-power device "hitchhikes" on the radio waves of a primary transmitter (like a base station) to send its own data. However, traditional SR suffers from the "double fading" effect—the signal loses power traveling to the backscatterer and then again traveling to the receiver.

RIS technology uses an array of passive reflecting elements to "shape" the wireless environment. The challenge addressed here is: How can we use an RIS to not only reflect signals but also embed its own information, creating a mutually beneficial relationship where the primary system gets a better signal and the secondary system gets a free ride?

Methods

The authors model a system with a multi-antenna primary transmitter (PTx) and receiver (PRx), and an RIS acting as a secondary transmitter (STx) sending data to a secondary receiver (SRx).

The core contribution is the joint design of active transmit beamforming (at the PTx) and passive reflecting beamforming (at the RIS). They formulate an optimization problem to minimize the total transmit power at the PTx while meeting strict data rate requirements for the primary user and signal-to-noise ratio (SNR) requirements for the secondary user.

To solve this complex, non-convex problem, they propose two main approaches:

  1. Alternating Optimization (AO) Algorithm: This method breaks the big problem into smaller sub-problems, iteratively updating the PTx beamformer and then each individual RIS element until the system reaches an optimal state.
  2. Low-Complexity Distributed Algorithm: Recognizing that the AO method might be too computationally heavy for real-time 6G applications, they developed a faster version using Semi-Definite Relaxation (SDR). This version allows the RIS to design its reflections based on "backscatter link enhancement" without needing constant back-and-forth communication with the base station.

Datasets

The paper relies on numerical simulations rather than static datasets. The authors modeled wireless environments using:

  • Rician Fading Channels: To simulate environments with a strong line-of-sight component.
  • Rayleigh Fading Channels: To simulate rich-scattering environments without a direct path.
  • Path Loss Models: Standard distance-dependent models to evaluate how signal strength drops over distance.

Key Insights and Ideas

  • From Parasitic to Mutualistic: Unlike traditional backscatter, which can interfere with the primary signal, this RIS-assisted system is "symbiotic." The RIS reconfigures the environment to help the primary signal reach its destination, and in exchange, it uses that boosted signal to carry its own data.
  • Rank Enhancement: In MIMO systems, "rank" determines how many parallel data streams you can send. In a simple line-of-sight environment, the rank is often low (1). The authors show that the RIS can effectively "create" a rich scattering environment, increasing the channel rank and allowing for more data streams.
  • The $K^2$ Advantage: The authors highlight that the received signal power from an RIS increases quadratically with the number of reflecting elements ($K$). This is a massive boost that helps overcome the double-fading bottleneck of traditional backscatter.

Key Results

  • Power Savings: Simulations showed that the proposed AO algorithm significantly reduces the transmit power required compared to systems without RIS or systems using random beamforming.
  • Robustness to Blockage: In scenarios where the direct link between the base station and the user was blocked ("Weak Direct Link"), the RIS-assisted system allowed the primary transmission to continue successfully, whereas a standard system would have failed.
  • Efficiency vs. Complexity: The low-complexity algorithm achieved performance very close to the more intensive AO algorithm but with a fraction of the computational overhead, proving its viability for practical hardware implementation.

Limitations and Future Work

  • Perfect CSI Assumption: The study assumes "Perfect Channel State Information" (CSI)—meaning the system knows exactly how the signal is behaving at every point. In real-world RIS deployments, obtaining CSI for thousands of passive elements is a major practical hurdle.
  • Flat-Fading Focus: The current model focuses on flat-fading channels. Future work would need to extend this to frequency-selective fading (like OFDM systems used in 5G/6G) to be fully applicable to modern standards.
  • Hardware Constraints: The paper assumes continuous phase shifts for the RIS elements. Real-world RIS hardware often has "discrete" phase shifts (e.g., only 2 or 4 possible states), which adds another layer of optimization difficulty.

Summary updated

Abstract

To support super-massive access for future wireless communications, in this paper, we propose a novel large intelligent surface/antennas (LISA)-assisted symbiotic radio (SR) system in which a LISA, operating as an Internet-of-Things (IoT) device, transmits messages to an IoT receiver (IR) by using reflecting radio technique, and at the same time, it assists the primary transmission from a base station (BS) to a primary receiver (PR) by intelligently reconfiguring the wireless environment. We are interested in the joint design for active transmit beamforming at BS and passive reflecting beamforming at LISA to minimize the total transmit power at BS, subject to the signal-to-noise-ratio (SNR) constraint for the IoT communication and the rate constraint for the primary transmission. Due to the non-convexity of the formulated problem, for the general case, we decouple the original optimization problem into a series of subproblems using the alternating optimization method and solve them one by one based on KarushKuhnTucker (KKT) conditions and projection method. For the special case in which the direct links from BS to PR and IR are blocked, we decouple the formulated optimization problem into two subproblems, one of which is a semi-definite program (SDP) problem and the other is solved by using semi-definite relaxation (SDR) technique. The convergence performance and the computational complexity of the proposed algorithms are analyzed for both cases. Finally, simulation results are presented to validate the effectiveness of the proposed algorithms and the superiority of the proposed system.
BibTeX
@article{zhang2021reconfigurable,
  author = {Qianqian Zhang and Ying-Chang Liang and H. Vincent Poor},
  title = {{Reconfigurable Intelligent Surface Assisted MIMO Symbiotic Radio Networks}},
  journal = {IEEE Trans. Communications},
  year = {2021},
  doi = {10.1109/tcomm.2021.3070043},
}

Loading related content...

Figure