Quality Evaluation of Geothermal Fluid in the Lindian Area of the Songliao Basin

Hui Ji, Huanlai Zhu, Shangming Shi, Xianli DuInternational Journal of Energy 2023 · DOI

Abstract

The quality of geothermal fluids determines their direction of use. In the past, evaluations in the Lindian area mainly focused on single wells or localized zones. This study utilizes hydrochemical data from five geothermal wells to conduct a comprehensive quality assessment, including evaluations for medical mineral water, drinking water, fisheries, agriculture, and engineering suitability. The results indicate that while the fluids are unsuitable for drinking or direct irrigation, they are ideal for medical therapy, aquaculture, and geothermal heating after appropriate treatment.

Introduction

The Lindian area is a renowned "hometown of hot springs" in China, situated atop significant geothermal reservoirs in the Songliao Basin. Geothermal fluid is a complex chemical solution; its composition determines whether it is a therapeutic resource, an engineering hazard, or an environmental risk. This research seeks to systematically categorize these fluids to prevent resource waste and engineering failures, moving beyond simple temperature measurements to a rigorous chemical "fitness" test for various industries.

Methods and Study Area

The researchers analyzed five geothermal water samples (Wells Linre 2, 3, 5, 34, and 43) using a suite of hydrochemical techniques. The study area encompasses several geological structures, including the Keshan Yilong Anticline Belt and the Wuyuer Depression.

Map of the study area showing the distribution of geothermal sampling wells and major geological structures.

Key analytical methods included:

  • Ion Analysis: Measuring major cations ($Na^+, K^+, Ca^{2+}, Mg^{2+}$) and anions ($HCO_3^-, Cl^-, SO_4^{2-}$) to determine the water's chemical type.
  • Piper Trilinear Diagrams: A standard hydrogeological tool used to visualize the chemistry and classify the water according to the Schukalev method.
  • Index Calculations: Mathematical formulas were applied to predict engineering behavior, such as the Irrigation Coefficient ($K_a$) for soil safety and the Rezno Index (RI) for scaling and corrosion.

Hydrochemical Characteristics

The geothermal fluids are primarily $Cl \cdot HCO_3-Na$ or $HCO_3 \cdot Cl-Na$ types. This high sodium and bicarbonate/chloride mix is characteristic of deep sedimentary basin circulation, where water-rock interactions at depth enrich the fluid with specific minerals.

Piper trilinear diagram used to classify the hydrochemical types of the geothermal water samples from the five study wells.

Key Evaluation Results

Medical and Therapeutic Use

The study found that the geothermal wells in the study area are excellent candidates for medical thermal mineral water development. All wells reached the naming standard for "fluorine water." Additionally, except for Well Linre 34, all samples met the standards for boric and silicic acid mineral water. High concentrations of metasilicate and metaborate provide significant therapeutic potential for skin diseases and cardiovascular issues.

Drinking and Irrigation Limitations

Despite the mineral content, the water is unsuitable for consumption or agriculture. Total Dissolved Solids (TDS) levels reached up to 2680 mg/L, far exceeding the domestic hygiene limit of 1000 mg/L. High salinity and alkalinity make it dangerous for direct soil application, as it would lead to rapid soil salinization. Furthermore, elevated levels of iron and aluminum in some wells disqualify the water for daily drinking use.

Engineering and Heating Efficiency

Geothermal fluids in the area are generally non-corrosive with minimal scaling potential. However, a high foaming coefficient ($F$) suggests the water may foam excessively in traditional boilers. The authors recommend a "cascade utilization" model using heat pump technology. For example, 1 cubic meter of $50^\circ\text{C}$ water can provide significant heat for residential use before being repurposed for secondary applications like aquaculture, for which the water is well-suited (Class III classification).

Conclusion

The geothermal resources of the Lindian area are a valuable asset for specialized industries. While they cannot serve as a primary drinking water source or for standard irrigation, their chemical profile makes them ideal for medical tourism and efficient heating systems. Future work should focus on integrated cascade systems to maximize the economic value of the resource while maintaining reservoir pressure through reinjection.

Summary updated

Abstract

The quality of geothermal fluids determines their direction of use, and in the past, the evaluation of geothermal fluid quality mainly focused on single well evaluation or local area evaluation. This article uses 5 pieces of geothermal water chemistry data to conduct quality evaluation of geothermal fluids in the Lindian area, mainly including medical thermal mineral water quality evaluation, drinking mineral water evaluation, domestic drinking water evaluation, fishery water evaluation, agricultural irrigation water evaluation, and geothermal fluid corrosiveness and scaling tendency evaluation. The evaluation results show that the geothermal wells in the study area are not suitable for developing drinking mineral water; Not suitable as drinking water for daily use; It cannot be directly used as irrigation water evaluation; Suitable for medical hot mineral water development and aquaculture; Geothermal fluids are all non-corrosive water with minimal fouling, and can be used for geothermal heating after treatment.
BibTeX
@article{ji2023quality,
  author = {Hui Ji and Huanlai Zhu and Shangming Shi and Xianli Du},
  title = {{Quality Evaluation of Geothermal Fluid in the Lindian Area of the Songliao Basin}},
  journal = {International Journal of Energy},
  year = {2023},
  doi = {10.54097/ije.v2i3.8784},
}
Figure