Abstract
Reconfigurable intelligent surfaces (RISs) are considered to be a key enabler of highly energy-efficient 6G and beyond networks. This property arises from the absence of power amplifiers in the structure, in contrast to active nodes, such as small cells and relays. However, still an amount of power is required for their operation. To improve their energy efficiency further, we propose the notion of perpetual RISs, which secure the power needed to supply their functionalities through wireless energy harvesting of the impinging transmitted electromagnetic signals. Towards this, we initially explain the rationale behind such RIS capability and proceed with the presentation of the main RIS controller architecture that can realize this vision under an in-band energy harvesting consideration. Furthermore, we present a typical energy-harvesting architecture followed by two harvesting protocols. Subsequently, we study the performance of the two protocols under a typical communications scenario. Finally, we elaborate on the main research challenges governing the realization of large-scale networks with perpetual RISs.
Introduction
As wireless communication transitions toward millimeter-wave (mmWave) and Terahertz (THz) frequencies, the challenge of signal blockage becomes acute. Reconfigurable Intelligent Surfaces (RISs) offer a solution by acting as "smart mirrors" that steer signals around obstacles. However, traditional RIS implementations rely on power-hungry FPGA controllers, necessitating external power sources or frequent battery replacements. This paper introduces "perpetual" RISs—devices capable of harvesting energy directly from the communication signals they manipulate, enabling maintenance-free, large-scale deployment.
Architectural Innovation: From FPGA to Integrated ASICs
A primary hurdle for autonomous RIS operation is the power consumption of the control electronics. Traditional FPGA-based architectures are too energy-intensive for self-sustaining operation. The authors propose an integrated architecture where custom Application-Specific Integrated Circuits (ASICs) are embedded directly into the metasurface. These ASICs utilize asynchronous logic to reduce static power consumption to the microwatt level, making self-sustainability feasible.
In-Band Energy Harvesting Protocols
To balance the dual tasks of signal reflection and energy harvesting, the research examines two primary protocols:
- Time-splitting: The RIS alternates between a dedicated harvesting phase (acting as an absorber) and a reflection phase.
- Unit-Cell (UC)-splitting: A subset of the surface's elements is dedicated to energy harvesting while the remainder simultaneously reflects signals to the user.
The RIS captures incident electromagnetic waves and converts them into DC power via rectifying circuits to maintain an internal charge, effectively recycling the energy already present in the environment.
Performance and the "Perpetual" Threshold
Simulation results at 28 GHz demonstrate that the UC-splitting protocol significantly outperforms time-splitting in terms of average data rate. A critical finding is the impact of static power consumption. If the ASIC's static power exceeds a certain threshold (approximately 60-68 $\mu W$ in the studied scenario), the RIS cannot harvest enough energy to remain "perpetual," and the communication rate collapses.
As shown in the figure above, UC-splitting maintains a higher data rate and exhibits greater resilience to increased power demands compared to the linear decline of the time-splitting approach. For instance, at a static power consumption of $32 \mu W$, UC-splitting maintains a data rate of roughly 2 Gbps.
Challenges and Future Directions
While the theoretical framework is promising, several challenges remain for large-scale realization:
- Manufacturing: Integrating thousands of ASICs with efficient RF-combining networks at scale is a significant engineering challenge.
- Channel Dynamics: Future models must account for the stochastic nature of energy arrivals in highly mobile THz environments.
- Network Planning: Deployments must be optimized not just for signal coverage, but for "power illumination" to ensure RIS longevity.
In conclusion, the shift toward integrated architectures and simultaneous harvesting/reflecting protocols like UC-splitting provides a viable path toward truly green, perpetual 6G infrastructure.
Summary updated