Numerical Simulation Study on Co-combustion Characteristics of Biogas and Antibiotic Filter Residue in a Grate Furnace

Xinyue Gao, Changâ€TMan Wang, Chengchang Liu, Gaofeng Fan, Qisen Mao, Defu Che2021 · DOI

Abstract

The treatment of antibiotic filter residue (AFR) is an important issue due to its special nature, large output, and combustion difficulty. Currently, AFR is generally incinerated, but the production of dioxins poses significant challenges. There is a lack of research on how co-combustion conditions influence the temperature field and flue gas characteristics, which is vital for practical applications. This study investigates the effects of mixing AFR with biogas on furnace temperature fields and emission characteristics through numerical simulation. Results indicate that opposed injection is the optimal configuration when the biogas proportion is constant, providing new insights into the thermal utilization of AFR.

Introduction

The rapid expansion of the medical industry has led to a 10% annual increase in antibiotic filter residue (AFR) production in China. Disposing of this waste is complex; it contains residual antibiotics that threaten environmental safety, and traditional incineration often results in incomplete combustion and toxic dioxin emissions. Co-combusting AFR with biomass (such as peanut shells or poplar) and biogas offers a promising path for improving fuel flexibility and heat output. However, the physical dynamics within the furnace—specifically the impact of biogas injection placement on temperature distribution and emissions—remain poorly understood. Improper injection can lead to "cold spots," incomplete combustion, or localized overheating that damages furnace components.

Methodology

The researchers utilized Computational Fluid Dynamics (CFD) to model a biomass chain furnace. The methodology focused on several key areas:

  • Geometric Modeling and Grate Segmentation: The furnace was divided into a structured grid. To simulate the real-world progression of fuel, the grate was divided into eight distinct units (1–8), representing the transition from fuel pyrolysis at the front to high-temperature combustion in the middle and rear sections.
  • Boundary Conditions: The simulation incorporated experimental data from proximate and ultimate analyses of three fuels: Peanut Shell (PS), Poplar (PL), and Antibiotic Filter Residue (AFR).
  • Variable Testing: Three biogas injection configurations were compared: front wall injection, opposed injection, and rear arch injection, with a constant biogas mixing ratio of 20%.
Schematic of the furnace geometry and grate segmentation units.

Key Insights and Results

The simulation revealed critical dynamics regarding oxygen distribution and combustion efficiency. A "Y-shaped" $O_2$ distribution field was observed following secondary air injection, creating an oxygen-rich zone above the rear arch where Nitrogen Oxide (NO) generation is most prevalent.

Injection Position and Performance

The study found that the injection position significantly affects both combustion efficiency and equipment longevity:

  • Opposed Injection: This configuration created the most intense turbulence, ensuring superior mixing of biogas and air. It resulted in the lowest methane ($CH_4$) concentrations at the outlet, indicating the highest combustion efficiency.
  • Front-Wall Injection: This setup tended to elongate the flame toward the back of the furnace, causing it to lick the rear wall. This poses a risk of overheating the water walls and reducing the furnace's operational lifespan.
  • Rear-Arch Injection: This led to combustion occurring too close to the front wall, shifting the thermal load unfavorably.
Grate temperature distribution and input gas concentration distribution along the furnace length.

Thermal and Emission Characteristics

The co-combustion of PS-AFR and PL-AFR blends (1:1 mass ratio) with biogas successfully boosted combustion temperatures to sustainable levels. NO generation was found to be non-uniform, primarily concentrated in high-temperature, oxygen-rich areas in the upper furnace and above the rear arch.

Conclusion and Future Directions

This research demonstrates that opposed injection is the most effective mode for co-combusting biogas with AFR, providing a stable temperature field and high efficiency. While this study optimized the injection position, future work should explore:

  1. Dynamic Mixing Ratios: Investigating how varying the percentage of biogas (e.g., 10% to 30%) interacts with different injection positions.
  2. Dioxin Kinetics: Explicitly simulating the chemical kinetics of dioxin formation and suppression in these co-combustion setups.
  3. Long-term Material Impact: Studying the effects of AFR ash on grate corrosion and fouling over extended periods to facilitate industrial scaling.

Summary updated

Abstract

The treatment of antibiotic filter residue (AFR) is an important issue, because of its special nature, the large output, and the difficulty of combustion. Nowadays, the AFR is generally incinerated, but dioxins are produced during the process, which makes incineration technology face challenges. There is a lack of research on the influences of co-combustion conditions on temperature field and flue gas characteristics, but it plays an important role in practical applications. The present study aimed to investigate the influences of AFR mixed with biogas on furnace temperature field and emission characteristics through numerical simulation. The results showed that the opposed injection position was the best type when the proportion of mixed biogas was constant. The results can provide new insight into co-combustion and thermal utilization of AFR.
BibTeX
@misc{gao2021numerical,
  author = {Xinyue Gao and Changâ€TMan Wang and Chengchang Liu and Gaofeng Fan and Qisen Mao and Defu Che},
  title = {{Numerical Simulation Study on Co-combustion Characteristics of Biogas and Antibiotic Filter Residue in a Grate Furnace}},
  year = {2021},
  doi = {10.46855/energy-proceedings-7164},
}
Figure