Abstract
The jet performance of an oxygen lance nozzle influences the smelting rhythm, smelting index, and energy consumption of a converter. Due to the complexity of the process of converter smelting, the changing temperature and gas composition in the converter significantly impact the jet characteristics of the oxygen lance nozzle in the smelting process; however, research on the change law of jet characteristics in different smelting periods is limited. In this study, we used Ansys Fluent 17.0 to simulate the variation of jet characteristics of a mixed injection comprising 6% CO2 and 94% O2; the mixed injection was tested using a dual-parameter oxygen lance nozzle in the early, middle, and late stages of smelting. The results show that the increase of CO concentration and ambient temperature in the converter lead to a decrease in the attenuation rate of jet velocity, improved independence of multiple jets, and an increase in the impact area of jets on the molten pool. Thus, when designing and employing oxygen lance nozzles, the influence of ambient temperature and furnace gas composition on jet characteristics must be considered.
Introduction
In steelmaking, an oxygen lance is used to blow supersonic jets into a converter to stir the molten pool and facilitate chemical reactions. Recently, mixing $CO_2$ with $O_2$ has shown promise for better phosphorus removal and reduced iron loss. However, the environment inside a converter is a moving target: temperatures soar and gas compositions shift drastically between the early, middle, and late stages of smelting.
Most nozzle designs are based on static or "cold" conditions. This paper addresses the gap in understanding how the jet's "punch" (velocity, core length, and impact area) changes as the furnace evolves. If the jet attenuates too quickly or if multiple jets merge prematurely, stirring efficiency drops, leading to higher energy consumption and lower metal quality.
Methods
The researchers employed a multi-pronged numerical approach using Ansys Fluent 17.0. A modified $k–\epsilon$ two-equation model was used to simulate high-velocity gas flow, while the Eddy Dissipation (ED) model and Discrete Ordinate (DO) radiation model accounted for combustion and intense heat transfer.
The study modeled a "dual-parameter" nozzle, which features a staggered arrangement of three large (B) and three small (S) holes with different throat diameters and inclination angles. To ensure the simulation was grounded in reality, a physical cold high-pressure jet detection system was used for validation, finding a strong correlation with numerical results (error margins between 2.32% and 13.2%).
Key Insights and Results
One of the most interesting findings is that the combustion of CO in the furnace gas with the oxygen jet creates a high-temperature zone around the jet. This reduces the density of the surrounding gas, which in turn reduces the "entrainment" (the pulling in of surrounding gas) that usually slows the jet down. Higher ambient temperatures lead to lower gas density, allowing the supersonic jet to maintain its velocity for a longer distance and effectively extending the "potential core."
As shown in the turbulent kinetic energy profiles, the "Large" (B) nozzles consistently maintained higher velocities and longer core lengths than the "Small" (S) nozzles due to reduced gas entrainment relative to their larger diameters. Jet performance peaks during the middle stage of smelting because that is when CO concentration is highest, leading to the most significant combustion-driven shielding effect. Furthermore, the simulation showed that the impact area on the molten pool increases as the smelting progresses, thanks to the combined effects of rising temperature and gas-phase reactions.
Conclusion
The study concludes that the influence of ambient temperature and furnace gas composition on jet characteristics must be considered when designing oxygen lance nozzles. While this study uses snapshots of three smelting periods, future work could involve transient simulations that model the gas composition and temperature changes in real-time, as well as multiphase simulations to explicitly model the interaction between these jets and the liquid steel surface.
Summary updated